lkml.org 
[lkml]   [2002]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 1/9]Four new i2c drivers and __init/__exit cleanup to i2c
Hello Linus,
New I2C drivers that have been adjusted after Russell King comments of August.
o i2c-algo-8xx.c
o i2c-pport.c
o i2c-adap-ibm_ocp.c
o i2c-pcf-epp.c
o Add new drivers to Config.in and Makefile.
o Add new drivers to i2c-core for initialization.
o Remove EXPORT_NO_SYMBOLS statement from i2c-dev, i2c-elektor and i2c-frodo.
o Cleanup init_module and cleanup_module adding __init and __exit to most drivers.
o Adjust i2c-elektor with cli/sti replacement.
--
ac9410@attbi.com
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux-2.5.34/drivers/i2c/i2c-algo-8xx.c 2002-06-11 22:29:54.000000000 -0400
@@ -0,0 +1,594 @@
+/*
+ * i2c-algo-8xx.c i2x driver algorithms for MPC8XX CPM
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
+ *
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * moved into proper i2c interface; separated out platform specific
+ * parts into i2c-rpx.c
+ * Brad Parker (brad@heeltoe.com)
+ */
+
+// XXX todo
+// timeout sleep?
+
+/* $Id: i2c-algo-8xx.c,v 1.6 2002/06/12 02:29:54 mds Exp $ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-8xx.h>
+
+#define CPM_MAX_READ 513
+
+static wait_queue_head_t iic_wait;
+static ushort r_tbase, r_rbase;
+
+int cpm_scan = 1;
+int cpm_debug = 0;
+
+static void
+cpm_iic_interrupt(void *dev_id, void *regs)
+{
+ volatile i2c8xx_t *i2c = (i2c8xx_t *)dev_id;
+
+ if (cpm_debug > 1)
+ printk("cpm_iic_interrupt(dev_id=%p)\n", dev_id);
+
+ /* Chip errata, clear enable.
+ */
+ i2c->i2c_i2mod = 0;
+
+ /* Clear interrupt.
+ */
+ i2c->i2c_i2cer = 0xff;
+
+ /* Get 'me going again.
+ */
+ wake_up_interruptible(&iic_wait);
+}
+
+static void
+cpm_iic_init(struct i2c_algo_8xx_data *cpm_adap)
+{
+ volatile iic_t *iip = cpm_adap->iip;
+ volatile i2c8xx_t *i2c = cpm_adap->i2c;
+
+ if (cpm_debug) printk("cpm_iic_init() - iip=%p\n",iip);
+
+ /* Initialize the parameter ram.
+ * We need to make sure many things are initialized to zero,
+ * especially in the case of a microcode patch.
+ */
+ iip->iic_rstate = 0;
+ iip->iic_rdp = 0;
+ iip->iic_rbptr = 0;
+ iip->iic_rbc = 0;
+ iip->iic_rxtmp = 0;
+ iip->iic_tstate = 0;
+ iip->iic_tdp = 0;
+ iip->iic_tbptr = 0;
+ iip->iic_tbc = 0;
+ iip->iic_txtmp = 0;
+
+ /* Set up the IIC parameters in the parameter ram.
+ */
+ iip->iic_tbase = r_tbase = cpm_adap->dp_addr;
+ iip->iic_rbase = r_rbase = cpm_adap->dp_addr + sizeof(cbd_t)*2;
+
+ iip->iic_tfcr = SMC_EB;
+ iip->iic_rfcr = SMC_EB;
+
+ /* Set maximum receive size.
+ */
+ iip->iic_mrblr = CPM_MAX_READ;
+
+ /* Initialize Tx/Rx parameters.
+ */
+ if (cpm_adap->reloc == 0) {
+ volatile cpm8xx_t *cp = cpm_adap->cp;
+
+ cp->cp_cpcr =
+ mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG)
+ cpu_relax(); /* prevent Athlons self-destruct */
+ }
+
+ /* Select an arbitrary address. Just make sure it is unique.
+ */
+ i2c->i2c_i2add = 0x34;
+
+ /* Make clock run maximum slow.
+ */
+ i2c->i2c_i2brg = 7;
+
+ /* Disable interrupts.
+ */
+ i2c->i2c_i2cmr = 0;
+ i2c->i2c_i2cer = 0xff;
+
+ init_waitqueue_head(&iic_wait);
+
+ /* Install interrupt handler.
+ */
+ if (cpm_debug) {
+ printk ("%s[%d] Install ISR for IRQ %d\n",
+ __func__,__LINE__, CPMVEC_I2C);
+ }
+ (*cpm_adap->setisr)(CPMVEC_I2C, cpm_iic_interrupt, (void *)i2c);
+}
+
+
+static int
+cpm_iic_shutdown(struct i2c_algo_8xx_data *cpm_adap)
+{
+ volatile i2c8xx_t *i2c = cpm_adap->i2c;
+
+ /* Shut down IIC.
+ */
+ i2c->i2c_i2mod = 0;
+ i2c->i2c_i2cmr = 0;
+ i2c->i2c_i2cer = 0xff;
+
+ return(0);
+}
+
+static void
+cpm_reset_iic_params(volatile iic_t *iip)
+{
+ iip->iic_tbase = r_tbase;
+ iip->iic_rbase = r_rbase;
+
+ iip->iic_tfcr = SMC_EB;
+ iip->iic_rfcr = SMC_EB;
+
+ iip->iic_mrblr = CPM_MAX_READ;
+
+ iip->iic_rstate = 0;
+ iip->iic_rdp = 0;
+ iip->iic_rbptr = r_rbase;
+ iip->iic_rbc = 0;
+ iip->iic_rxtmp = 0;
+ iip->iic_tstate = 0;
+ iip->iic_tdp = 0;
+ iip->iic_tbptr = r_tbase;
+ iip->iic_tbc = 0;
+ iip->iic_txtmp = 0;
+}
+
+#define BD_SC_NAK ((ushort)0x0004) /* NAK - did not respond */
+#define CPM_CR_CLOSE_RXBD ((ushort)0x0007)
+
+static void force_close(struct i2c_algo_8xx_data *cpm)
+{
+ if (cpm->reloc == 0) {
+ volatile cpm8xx_t *cp = cpm->cp;
+
+ if (cpm_debug) printk("force_close()\n");
+ cp->cp_cpcr =
+ mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_CLOSE_RXBD) |
+ CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG)
+ cpu_relax(); /* prevent Athlons self-destruct */
+ }
+}
+
+
+/* Read from IIC...
+ * abyte = address byte, with r/w flag already set
+ */
+static int
+cpm_iic_read(struct i2c_algo_8xx_data *cpm, u_char abyte, char *buf, int count)
+{
+ volatile iic_t *iip = cpm->iip;
+ volatile i2c8xx_t *i2c = cpm->i2c;
+ volatile cpm8xx_t *cp = cpm->cp;
+ volatile cbd_t *tbdf, *rbdf;
+ u_char *tb;
+ unsigned long flags;
+
+ if (count >= CPM_MAX_READ)
+ return -EINVAL;
+
+ /* check for and use a microcode relocation patch */
+ if (cpm->reloc) {
+ cpm_reset_iic_params(iip);
+ }
+
+ tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase];
+ rbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_rbase];
+
+ /* To read, we need an empty buffer of the proper length.
+ * All that is used is the first byte for address, the remainder
+ * is just used for timing (and doesn't really have to exist).
+ */
+ if (cpm->reloc) {
+ cpm_reset_iic_params(iip);
+ }
+ tb = cpm->temp;
+ tb = (u_char *)(((uint)tb + 15) & ~15);
+ tb[0] = abyte; /* Device address byte w/rw flag */
+
+ flush_dcache_range((unsigned long) tb, (unsigned long) (tb+1));
+
+ if (cpm_debug) printk("cpm_iic_read(abyte=0x%x)\n", abyte);
+
+ tbdf->cbd_bufaddr = __pa(tb);
+ tbdf->cbd_datlen = count + 1;
+ tbdf->cbd_sc =
+ BD_SC_READY | BD_SC_INTRPT | BD_SC_LAST |
+ BD_SC_WRAP | BD_IIC_START;
+
+ rbdf->cbd_datlen = 0;
+ rbdf->cbd_bufaddr = __pa(buf);
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+
+ dma_cache_inv((unsigned long) buf, (unsigned long) (buf+count));
+
+ /* Chip bug, set enable here */
+ local_irq_save(flags);
+ i2c->i2c_i2cmr = 0x13; /* Enable some interupts */
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2mod = 1; /* Enable */
+ i2c->i2c_i2com = 0x81; /* Start master */
+
+ /* Wait for IIC transfer */
+ interruptible_sleep_on(&iic_wait);
+ local_irq_restore(flags);
+ if (signal_pending(current))
+ return -EIO;
+
+ if (cpm_debug) {
+ printk("tx sc %04x, rx sc %04x\n",
+ tbdf->cbd_sc, rbdf->cbd_sc);
+ }
+
+ if (tbdf->cbd_sc & BD_SC_NAK) {
+ printk("IIC read; no ack\n");
+ return 0;
+ }
+
+ if (rbdf->cbd_sc & BD_SC_EMPTY) {
+ printk("IIC read; complete but rbuf empty\n");
+ force_close(cpm);
+ printk("tx sc %04x, rx sc %04x\n",
+ tbdf->cbd_sc, rbdf->cbd_sc);
+ }
+
+ if (cpm_debug) printk("read %d bytes\n", rbdf->cbd_datlen);
+
+ if (rbdf->cbd_datlen < count) {
+ printk("IIC read; short, wanted %d got %d\n",
+ count, rbdf->cbd_datlen);
+ return 0;
+ }
+
+
+ dma_cache_inv((unsigned long) buf, (unsigned long) (buf+count));
+
+ return count;
+}
+
+/* Write to IIC...
+ * addr = address byte, with r/w flag already set
+ */
+static int
+cpm_iic_write(struct i2c_algo_8xx_data *cpm, u_char abyte, char *buf,int count)
+{
+ volatile iic_t *iip = cpm->iip;
+ volatile i2c8xx_t *i2c = cpm->i2c;
+ volatile cpm8xx_t *cp = cpm->cp;
+ volatile cbd_t *tbdf;
+ u_char *tb;
+ unsigned long flags;
+
+ /* check for and use a microcode relocation patch */
+ if (cpm->reloc) {
+ cpm_reset_iic_params(iip);
+ }
+ tb = cpm->temp;
+ tb = (u_char *)(((uint)tb + 15) & ~15);
+ *tb = abyte; /* Device address byte w/rw flag */
+
+ flush_dcache_range((unsigned long) tb, (unsigned long) (tb+1));
+ flush_dcache_range((unsigned long) buf, (unsigned long) (buf+count));
+
+ if (cpm_debug) printk("cpm_iic_write(abyte=0x%x)\n", abyte);
+
+ /* set up 2 descriptors */
+ tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase];
+
+ tbdf[0].cbd_bufaddr = __pa(tb);
+ tbdf[0].cbd_datlen = 1;
+ tbdf[0].cbd_sc = BD_SC_READY | BD_IIC_START;
+
+ tbdf[1].cbd_bufaddr = __pa(buf);
+ tbdf[1].cbd_datlen = count;
+ tbdf[1].cbd_sc = BD_SC_READY | BD_SC_INTRPT | BD_SC_LAST | BD_SC_WRAP;
+
+ /* Chip bug, set enable here */
+ local_irq_save(flags);
+ i2c->i2c_i2cmr = 0x13; /* Enable some interupts */
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2mod = 1; /* Enable */
+ i2c->i2c_i2com = 0x81; /* Start master */
+
+ /* Wait for IIC transfer */
+ interruptible_sleep_on(&iic_wait);
+ local_irq_restore(flags);
+ if (signal_pending(current))
+ return -EIO;
+
+ if (cpm_debug) {
+ printk("tx0 sc %04x, tx1 sc %04x\n",
+ tbdf[0].cbd_sc, tbdf[1].cbd_sc);
+ }
+
+ if (tbdf->cbd_sc & BD_SC_NAK) {
+ printk("IIC write; no ack\n");
+ return 0;
+ }
+
+ if (tbdf->cbd_sc & BD_SC_READY) {
+ printk("IIC write; complete but tbuf ready\n");
+ return 0;
+ }
+
+ return count;
+}
+
+/* See if an IIC address exists..
+ * addr = 7 bit address, unshifted
+ */
+static int
+cpm_iic_tryaddress(struct i2c_algo_8xx_data *cpm, int addr)
+{
+ volatile iic_t *iip = cpm->iip;
+ volatile i2c8xx_t *i2c = cpm->i2c;
+ volatile cpm8xx_t *cp = cpm->cp;
+ volatile cbd_t *tbdf, *rbdf;
+ u_char *tb;
+ unsigned long flags, len;
+
+ if (cpm_debug > 1)
+ printk("cpm_iic_tryaddress(cpm=%p,addr=%d)\n", cpm, addr);
+
+ /* check for and use a microcode relocation patch */
+ if (cpm->reloc) {
+ cpm_reset_iic_params(iip);
+ }
+
+ if (cpm_debug && addr == 0) {
+ printk("iip %p, dp_addr 0x%x\n", cpm->iip, cpm->dp_addr);
+ printk("iic_tbase %d, r_tbase %d\n", iip->iic_tbase, r_tbase);
+ }
+
+ tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase];
+ rbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_rbase];
+
+ tb = cpm->temp;
+ tb = (u_char *)(((uint)tb + 15) & ~15);
+
+ /* do a simple read */
+ tb[0] = (addr << 1) | 1; /* device address (+ read) */
+ len = 2;
+
+ flush_dcache_range((unsigned long) tb, (unsigned long) (tb+1));
+
+ tbdf->cbd_bufaddr = __pa(tb);
+ tbdf->cbd_datlen = len;
+ tbdf->cbd_sc =
+ BD_SC_READY | BD_SC_INTRPT | BD_SC_LAST |
+ BD_SC_WRAP | BD_IIC_START;
+
+ rbdf->cbd_datlen = 0;
+ rbdf->cbd_bufaddr = __pa(tb+2);
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+
+ local_irq_save(flags);
+ i2c->i2c_i2cmr = 0x13; /* Enable some interupts */
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2mod = 1; /* Enable */
+ i2c->i2c_i2com = 0x81; /* Start master */
+
+ if (cpm_debug > 1) printk("about to sleep\n");
+
+ /* wait for IIC transfer */
+ interruptible_sleep_on(&iic_wait);
+ local_irq_restore(flags);
+ if (signal_pending(current))
+ return -EIO;
+
+ if (cpm_debug > 1) printk("back from sleep\n");
+
+ if (tbdf->cbd_sc & BD_SC_NAK) {
+ if (cpm_debug > 1) printk("IIC try; no ack\n");
+ return 0;
+ }
+
+ if (tbdf->cbd_sc & BD_SC_READY) {
+ printk("IIC try; complete but tbuf ready\n");
+ }
+
+ return 1;
+}
+
+static int cpm_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[],
+ int num)
+{
+ struct i2c_algo_8xx_data *adap = i2c_adap->algo_data;
+ struct i2c_msg *pmsg;
+ int i, ret;
+ u_char addr;
+
+ for (i = 0; i < num; i++) {
+ pmsg = &msgs[i];
+
+ if (cpm_debug)
+ printk("i2c-algo-8xx.o: "
+ "#%d addr=0x%x flags=0x%x len=%d\n",
+ i, pmsg->addr, pmsg->flags, pmsg->len);
+
+ addr = pmsg->addr << 1;
+ if (pmsg->flags & I2C_M_RD )
+ addr |= 1;
+ if (pmsg->flags & I2C_M_REV_DIR_ADDR )
+ addr ^= 1;
+
+ if (!(pmsg->flags & I2C_M_NOSTART)) {
+ }
+ if (pmsg->flags & I2C_M_RD ) {
+ /* read bytes into buffer*/
+ ret = cpm_iic_read(adap, addr, pmsg->buf, pmsg->len);
+ if (cpm_debug)
+ printk("i2c-algo-8xx.o: read %d bytes\n", ret);
+ if (ret < pmsg->len ) {
+ return (ret<0)? ret : -EREMOTEIO;
+ }
+ } else {
+ /* write bytes from buffer */
+ ret = cpm_iic_write(adap, addr, pmsg->buf, pmsg->len);
+ if (cpm_debug)
+ printk("i2c-algo-8xx.o: wrote %d\n", ret);
+ if (ret < pmsg->len ) {
+ return (ret<0) ? ret : -EREMOTEIO;
+ }
+ }
+ }
+ return (num);
+}
+
+static int algo_control(struct i2c_adapter *adapter,
+ unsigned int cmd, unsigned long arg)
+{
+ return 0;
+}
+
+static u32 cpm_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+/* -----exported algorithm data: ------------------------------------- */
+
+static struct i2c_algorithm cpm_algo = {
+ "MPC8xx CPM algorithm",
+ I2C_ALGO_MPC8XX,
+ cpm_xfer,
+ NULL,
+ NULL, /* slave_xmit */
+ NULL, /* slave_recv */
+ algo_control, /* ioctl */
+ cpm_func, /* functionality */
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int i2c_8xx_add_bus(struct i2c_adapter *adap)
+{
+ int i;
+ struct i2c_algo_8xx_data *cpm_adap = adap->algo_data;
+
+ if (cpm_debug)
+ printk("i2c-algo-8xx.o: hw routines for %s registered.\n",
+ adap->name);
+
+ /* register new adapter to i2c module... */
+
+ adap->id |= cpm_algo.id;
+ adap->algo = &cpm_algo;
+
+#ifdef MODULE
+ MOD_INC_USE_COUNT;
+#endif
+
+ i2c_add_adapter(adap);
+ cpm_iic_init(cpm_adap);
+
+ /* scan bus */
+ if (cpm_scan) {
+ printk(KERN_INFO " i2c-algo-8xx.o: scanning bus %s...\n",
+ adap->name);
+ for (i = 0; i < 128; i++) {
+ if (cpm_iic_tryaddress(cpm_adap, i)) {
+ printk("(%02x)",i<<1);
+ }
+ }
+ printk("\n");
+ }
+ return 0;
+}
+
+
+int i2c_8xx_del_bus(struct i2c_adapter *adap)
+{
+ int res;
+ struct i2c_algo_8xx_data *cpm_adap = adap->algo_data;
+
+ cpm_iic_shutdown(cpm_adap);
+
+ if ((res = i2c_del_adapter(adap)) < 0)
+ return res;
+
+ printk("i2c-algo-8xx.o: adapter unregistered: %s\n",adap->name);
+
+#ifdef MODULE
+ MOD_DEC_USE_COUNT;
+#endif
+ return 0;
+}
+
+EXPORT_SYMBOL(i2c_8xx_add_bus);
+EXPORT_SYMBOL(i2c_8xx_del_bus);
+
+int __init i2c_algo_8xx_init (void)
+{
+ printk("i2c-algo-8xx.o: i2c mpc8xx algorithm module version %s (%s)\n", I2C_VERSION, I2C_DATE);
+ return 0;
+}
+
+
+#ifdef MODULE
+MODULE_AUTHOR("Brad Parker <brad@heeltoe.com>");
+MODULE_DESCRIPTION("I2C-Bus MPC8XX algorithm");
+#ifdef MODULE_LICENSE
+MODULE_LICENSE("GPL");
+#endif
+
+int init_module(void)
+{
+ return i2c_algo_8xx_init();
+}
+
+void cleanup_module(void)
+{
+}
+#endif
--- /dev/null 1994-07-17 19:46:18.000000000 -0400
+++ linux-2.5.34/include/linux/i2c-algo-8xx.h 2002-06-11 22:29:54.000000000 -0400
@@ -0,0 +1,43 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-8xx.h i2c driver algorithms for MPX8XX CPM */
+/*
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+/* ------------------------------------------------------------------------- */
+
+/* $Id: i2c-algo-8xx.h,v 1.3 2002/06/12 02:29:54 mds Exp $ */
+
+#ifndef I2C_ALGO_8XX_H
+#define I2C_ALGO_8XX_H 1
+
+#include <linux/i2c.h>
+
+struct i2c_algo_8xx_data {
+ uint dp_addr;
+ int reloc;
+ volatile i2c8xx_t *i2c;
+ volatile iic_t *iip;
+ volatile cpm8xx_t *cp;
+
+ int (*setisr) (int irq,
+ void (*func)(void *, void *),
+ void *data);
+
+ u_char temp[513];
+};
+
+int i2c_8xx_add_bus(struct i2c_adapter *);
+int i2c_8xx_del_bus(struct i2c_adapter *);
+
+#endif /* I2C_ALGO_8XX_H */
\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.039 / U:7.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site