Messages in this thread |  | | Date | Wed, 11 Sep 2002 21:39:1 +0800 | From | zhengchuanbo <> | Subject | problem with sundance driver for dfe-550fx (DL10050B) |
| |
i tried to test the dfe-550fx card with the new driver from Donald Becker. the version is "sundance.c:v1.09a 7/16/2002". the chip of the d-link card is DL10050B. a DL10050A card work with the v1.02d driver. but there are some problems with the DL10050B one. the kernel version is 2.4.19pre1. i run the following commands: insmod pci-scan.o insmod sundance.o and it worked. the log is as follows:
Sep 11 21:20:58 netpower kernel: pci-scan.c:v1.10 7/13/2002 Donald Becker <beck er@scyld.com> http://www.scyld.com/linux/drivers.html Sep 11 21:21:01 netpower kernel: sundance.c:v1.09a 7/16/2002 Written by Donald Becker <becker@scyld.com> Sep 11 21:21:01 netpower kernel: http://www.scyld.com/network/sundance.html Sep 11 21:21:01 netpower kernel: eth2: OEM Sundance Technology ST201 at 0xe800, 00:05:5d:5e:b9:dc, IRQ 24. Sep 11 21:21:01 netpower kernel: eth2: MII PHY found at address 1, status 0x7809 advertising 01e1. Sep 11 21:21:01 netpower kernel: eth3: OEM Sundance Technology ST201 at 0xe400, 00:05:5d:5e:b9:df, IRQ 22. Sep 11 21:21:01 netpower kernel: eth3: MII PHY found at address 1, status 0x7809 advertising 01e1.
then when i run the cmd "ifconfig eth2 192.168.0.10" to bring the card to work,it failed. the problem is as follows, sh-2.03# ifconfig eth2 192.168.0.10 SIOCSIFFLAGS: No such device and there is no log for this. so is there some problem on the support of DL10050B?
please cc. thanks.
zhengchuanbo zhengcb@netpower.com.cn
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |