lkml.org 
[lkml]   [2002]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectProblems compiling 2.5.32
From
Date

I don't know whether these issues are new to you all, but
anyway, here they go:


Version: 2.5.32 (patched from 2.5.31)

1. Module 8250.o does not compile due to syntax errors, but a little
kludge made it work:

--- linux-2.5.31-orig/include/linux/serialP.h Sat Aug 31 10:56:03 2002
+++ linux-2.5.31/include/linux/serialP.h Fri Aug 30 18:12:07 2002
@@ -24,7 +24,7 @@
#include <linux/tqueue.h>
#include <linux/circ_buf.h>
#include <linux/wait.h>
-#if (LINUX_VERSION_CODE < 0x020300)
+#if 1 /*(LINUX_VERSION_CODE < 0x020300)*/
/* Unfortunate, but Linux 2.2 needs async_icount defined here and
* it got moved in 2.3 */
#include <linux/serial.h>

2. loop.o cannot be compiled as a module, because it results in:

loop.o: unresolved symbol balance_dirty_pages

when trying to insmod it.


3. Strange errors (no such errors with 2.4.x, same config)

PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 91080D5, ATA DISK drive
hdb: MATSHITA CR-587, ATAPI CD/DVD-ROM drive
hdc: CR-2801TE, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03520a4, I/O limit 4095Mb (mask 0xffffffff)
hda: host protected area => 1
hda: 21095424 sectors (10801 MB) w/512KiB Cache, CHS=1313/255/63, (U)DMA
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
hdb:ide-scsi: unsup command: dev 03:40: REQ_CMD REQ_STARTED sector 0, nr/cnr 8/1
end_request: I/O error, dev 03:40, sector 0
Buffer I/O error on device ide0(3,64), logical block 0
ide-scsi: unsup command: dev 03:40: REQ_CMD REQ_STARTED sector 1, nr/cnr 7/1

end_request: I/O error, dev 03:40, sector 1
Buffer I/O error on device ide0(3,64), logical block 1
ide-scsi: unsup command: dev 03:40: REQ_CMD REQ_STARTED sector 2, nr/cnr 6/1

end_request: I/O error, dev 03:40, sector 2
Buffer I/O error on device ide0(3,64), logical block 2
ide-scsi: unsup command: dev 03:40: REQ_CMD REQ_STARTED sector 3, nr/cnr 5/1

[etc, etc, etc]



*NOTE* When replying, please CC to me (I'm not subscribed to
this list). Thank you.

Cheers,

Rodrigo Ventura

--

*** Rodrigo Martins de Matos Ventura <yoda@isr.ist.utl.pt>
*** Web page: http://www.isr.ist.utl.pt/~yoda
*** Teaching Assistant and PhD Student at ISR:
*** Instituto de Sistemas e Robotica, Polo de Lisboa
*** Instituto Superior Tecnico, Lisboa, PORTUGAL
*** PGP fingerprint = 0119 AD13 9EEE 264A 3F10 31D3 89B3 C6C4 60C6 4585
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.033 / U:1.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site