lkml.org 
[lkml]   [2002]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Hangs in 2.4.19 and 2.4.20-pre5 (IDE-related?)
On Thu, 29 Aug 2002, Meelis Roos wrote:

> pcibus = 33333
> 00:07.1 vendor=8086 device=7111 class=0101 irq=0 base4=f001
> ----------PIIX BusMastering IDE Configuration---------------
> Driver Version: 1.3
> South Bridge: 28945
> Revision: IDE 0x1
> Highest DMA rate: UDMA33
> BM-DMA base: 0xf000
> PCI clock: 33.3MHz
> -----------------------Primary IDE-------Secondary IDE------
> Enabled: yes yes
> Simplex only: no no
> Cable Type: 40w 40w
> -------------------drive0----drive1----drive2----drive3-----
> Prefetch+Post: yes yes yes yes
> Transfer Mode: PIO PIO PIO PIO
> Address Setup: 90ns 90ns 90ns 90ns
> Cmd Active: 360ns 360ns 360ns 360ns
> Cmd Recovery: 540ns 540ns 540ns 540ns
> Data Active: 90ns 90ns 90ns 90ns
> Data Recovery: 30ns 30ns 90ns 30ns
> Cycle Time: 120ns 120ns 180ns 120ns
> Transfer Rate: 16.6MB/s 16.6MB/s 11.1MB/s 16.6MB/s

That is not my work and you are on your own for that mess.
That looks straight out of 2.5.30.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.053 / U:1.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site