[lkml]   [2002]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH][2.5.32] CPU frequency and voltage scaling (0/4)
On Thu, 2002-08-29 at 19:47, Linus Torvalds wrote:
> Hmm.. I would assume that you'd just use the high frequency for that?

That doesnt work if Im trying to keep the machine running slowly at low
power but still want the I/O to work. I guess its fudgeable however and
the battery policy is enough info.

> I don't know the exact details of what kinds of frequencies the Geode
> supports, but it sounds to me like you don't really need another
> frequency value..

It tops out at about 300Mhz. Life gets excessively interesting because
about half the I/O on the Geode is imaginary and caused by SMM traps.
When power saving you normally set the geode to run slowly but spike
hard to full power when faking hardware. WIthout that some stuff like
the SB emulation doesnt work very well.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:28    [W:0.206 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site