lkml.org 
[lkml]   [2002]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectPROBLEM: found kernelbug about ext3 filesystem journaling
1)
Summary of the problem:
ext3 filesystem journaling fails by copying/writing data

2,3)
Full description:
by copying data to hdd with ext3 journaling filesystem the job fails. I
get a errormessage (kernel bug) with the following content:
***********************************************************************************
Aug 28 20:57:17 chris kernel: Assertion failure in
journal_unmap_buffer() at transaction.c:1859: "transaction ==
journal->j_running_transactio
n"
Aug 28 20:57:17 chris kernel: kernel BUG at transaction.c:1859!
Aug 28 20:57:17 chris kernel: invalid operand: 0000
Aug 28 20:57:17 chris kernel: CPU: 0
Aug 28 20:57:17 chris kernel: EIP:
0010:[af_packet:__insmod_af_packet_O/lib/modules/2.4.18-6mdk/kernel/net/pac+-2061112/96]
Not tainted
Aug 28 20:57:17 chris kernel: EIP: 0010:[<f2904cc8>] Not tainted
Aug 28 20:57:17 chris kernel: EFLAGS: 00010282
Aug 28 20:57:17 chris kernel: eax: 00000022 ebx: 3bd75902 ecx:
c0262520 edx: 0000569b
Aug 28 20:57:17 chris kernel: esi: ebe02430 edi: daa78480 ebp:
00000001 esp: e0e9de7c
Aug 28 20:57:17 chris kernel: ds: 0018 es: 0018 ss: 0018
Aug 28 20:57:17 chris kernel: Process mc (pid: 10371, stackpage=e0e9d000)
Aug 28 20:57:17 chris kernel: Stack: f290bbd0 00000743 deca3780 ea409880
d10a1910 00000000 daa78480 eee90200
Aug 28 20:57:17 chris kernel: daa78480 00001000 f2904e2c eee90200
daa78480 00000001 daa78480 c12d5340
*************************************************************************************
4)
kernel version from /proc/version:
Linux version 2.4.18-6mdk (quintela@bi.mandrakesoft.com) (gcc version
2.96 20000731 (Mandrake Linux 8.2 2.96-0.76mdk)) #1 Fri Mar 15 02:59:08
CET 2002

5)
Output /errormessage see above

6)
the failure occures while using cp, mc and so on, when copying data to
the hdd with ext3 journaling filesystem

7)
7.1)

software (add the output of the ver_linux script her)

dont know what to write here

7.2)

Processor information (from /proc/cpuinfo):


/proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1009.014
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 2011.95

7.3)
module information from /proc/modules

nls_iso8859-15 3360 0 (autoclean)
isofs 25792 0 (autoclean)
inflate_fs 19328 0 (autoclean) [isofs]
sr_mod 15160 0 (autoclean)
es1371 26656 2
soundcore 4068 4 [es1371]
ac97_codec 9568 0 [es1371]
gameport 1756 0 [es1371]
nfsd 69536 8 (autoclean)
lockd 49344 1 (autoclean) [nfsd]
sunrpc 62964 1 (autoclean) [nfsd lockd]
lp 6464 0
parport_pc 22088 1
parport 23968 1 [lp parport_pc]
af_packet 12488 0 (autoclean)
ip_vs 65400 0 (autoclean)
8139too 14336 1 (autoclean)
mii 1360 0 (autoclean) [8139too]
supermount 62180 2 (autoclean)
ide-scsi 8032 0
scsi_mod 92488 2 [sr_mod ide-scsi]
rtc 5912 0 (autoclean)
ext3 62092 5
jbd 39356 5 [ext3]
raid0 3400 3


7.4)

Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
8400-843f : Promise Technology, Inc. 20265
8400-8407 : ide2
8408-840f : ide3
8410-843f : PDC20265
8800-8803 : Promise Technology, Inc. 20265
9000-9007 : Promise Technology, Inc. 20265
9400-9403 : Promise Technology, Inc. 20265
9402-9402 : ide2
9800-9807 : Promise Technology, Inc. 20265
9800-9807 : ide2
a000-a03f : Ensoniq 5880 AudioPCI
a000-a03f : es1371
a400-a4ff : Realtek Semiconductor Co., Ltd. RTL-8139



00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000ce7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-2ffebfff : System RAM
00100000-00224a95 : Kernel code
00224a96-00277d6b : Kernel data
2ffec000-2ffeefff : ACPI Tables
2ffef000-2fffefff : reserved
2ffff000-2fffffff : ACPI Non-volatile Storage
d5800000-d581ffff : Promise Technology, Inc. 20265
d6000000-d6ffffff : nVidia Corporation NV11 (GeForce2 MX)
d7000000-d70000ff : Realtek Semiconductor Co., Ltd. RTL-8139
d7000000-d70000ff : 8139too
d8000000-dfffffff : nVidia Corporation NV11 (GeForce2 MX)
d8000000-d9ffffff : vesafb
e6000000-e7ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
ffff0000-ffffffff : reserved

7.5)PCI information ('lspci -vvv' as root)
lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 8042
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e6000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: d7f00000-d7efffff
Prefetchable memory behind bridge: e6000000-e5ffffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Subsystem: Asustek Computer, Inc.: Unknown device 8042
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Subsystem: Asustek Computer, Inc.: Unknown device 8042
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Accton Technology Corporation: Unknown device ec01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at a400 [size=256]
Region 1: Memory at d7000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at a000 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev a1) (prog-if 00 [VGA])
Subsystem: Creative Labs: Unknown device 104b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02)
Subsystem: Promise Technology, Inc.: Unknown device 4d33
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9800 [size=8]
Region 1: I/O ports at 9400 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8400 [size=64]
Region 5: Memory at d5800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [58] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-




7.6)
SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: LITE-ON Model: LTR-0841 Rev: MS86
Type: CD-ROM ANSI SCSI revision: 02

7.7) Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):

no more relevant data left i think


x)
Other notes, patches, fixes, workarounds

all mandrake update packages installed.
But i think its sure that the error is produced by kernel, thats what the output says.





Thank u for Help. I hope that this report can help to find the error.
Ah, i forgot to say, that this error can be repeated. every time when i write some data (not more than 2-3 minutes)
the error comes back. When the error occures i cant use the hdd ones more. I have allways to reboot.

Another part of the problem is:
first i have had only one ide bus used with one hdd. ...and the raid0 disks
The error occures the first time when i but another hdd as master at the second ide bus.
The error does never occures bevor.
But i need the second disk


hope u have all informations u need too find the problem.
have a nice day.

Christian Fraas



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.041 / U:3.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site