lkml.org 
[lkml]   [2002]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: e1000 strangeness in a dell poweredge 1650
I have had no problems with the e1000 and the 1650's
They run at 100Mbs and 1000Mbs fine. I have had them
working both with RH7.3 and Debian, and even FreeBSD.
Bad NIC? Bad cable? It going into a switch, a hub? These
things come with two NICs, do both do it?

Steve

Joe Kellner wrote:

>Hello,
>Running a dell poweredge 1650 with two intel e1000/pro's on redhat 7.3.
>We seem to be having a problem with the ethernet cards linking at 100 mbps/FDX
>and only working for a few seconds (usually around 30 seconds). There are no
>messages in dmesg other than when the module is loaded (Stating that port0 is
>up at 100 mbs/FDX). Is this a known issue, and is there a workaround? I can
>provide more information if needed.
>
>
>Thanks,
>-Joe Kellner
>
>-------------------------------------------------
>sent via KingsMeade secure webmail http://www.kingsmeadefarm.com
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
>



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.034 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site