Messages in this thread |  | | From | barrie_spence@agilent ... | Subject | RE: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33 | Date | Mon, 26 Aug 2002 12:00:21 +0200 |
| |
I've already tried "ideX=ata66" with no effect and they are definitely 80 pin cables (I thought the driver would complain if they weren't).
Barrie
-----Original Message----- From: Andre Hedrick [mailto:andre@linux-ide.org] Sent: 24 August 2002 21:23 To: Tomas Szepe Cc: M?ns Rullg?rd; barrie_spence@agilent.com; linux-kernel@vger.kernel.org; Alan Cox Subject: Re: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33
Not ignore just overloaded with trying to keep up w/ Alan.
On Sat, 24 Aug 2002, Tomas Szepe wrote:
> > > I'm running 2.4.19 with a Promise TX2 Ultra133, but even though the > > > card BIOS reports UDMA mode 5/6 on the drives, they are reported as > > > UDMA33 by the kernel. > > > > > > Trying hdparm -X69 after boot gives the message "Speed warnings UDMA > > > 3/4/5 is not functional." > > > > I was waiting for this. As I have pointed out several times before, > > there needs to be added a line > > > > hwif->udma_four = 1; > > > > at the appropriate place in pdc202xx.c. I don't know where it should > > be, so I can't write a patch. > > Andre Hedrick pretty much ignored both of my posts on the issue. > > Anyway, how does ide_init_pdc202xx() look to you (line 1141 in 2.4.20-pre4)? > There's this "switch (hwif->pci_dev->device)" which would seem to me to be the > proper place. > > T. > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ >
Andre Hedrick LAD Storage Consulting Group - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |