lkml.org 
[lkml]   [2002]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.4.19 - Promise TX2 Ultra133 (pdc20269) sticks at UDMA33

Not ignore just overloaded with trying to keep up w/ Alan.

On Sat, 24 Aug 2002, Tomas Szepe wrote:

> > > I'm running 2.4.19 with a Promise TX2 Ultra133, but even though the
> > > card BIOS reports UDMA mode 5/6 on the drives, they are reported as
> > > UDMA33 by the kernel.
> > >
> > > Trying hdparm -X69 after boot gives the message "Speed warnings UDMA
> > > 3/4/5 is not functional."
> >
> > I was waiting for this. As I have pointed out several times before,
> > there needs to be added a line
> >
> > hwif->udma_four = 1;
> >
> > at the appropriate place in pdc202xx.c. I don't know where it should
> > be, so I can't write a patch.
>
> Andre Hedrick pretty much ignored both of my posts on the issue.
>
> Anyway, how does ide_init_pdc202xx() look to you (line 1141 in 2.4.20-pre4)?
> There's this "switch (hwif->pci_dev->device)" which would seem to me to be the
> proper place.
>
> T.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

Andre Hedrick
LAD Storage Consulting Group

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.053 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site