lkml.org 
[lkml]   [2002]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: VT82C693A/694x and ripping audio CDs

I am not sure how ACard contollers behave under ATAPI.
You will have better data security if you boot off the ACard and run ATAPI
of VIA.

Cheers,

On Thu, 22 Aug 2002, Erik Steffl wrote:

> my system:
>
> debian unstable
> kernel 2.4.18
> ABIT VH6 II motherboard with VT82C693A/694x [Apollo PRO133x]
> hdc: FX810T4, ATAPI CD/DVD-ROM drive
> hde: TDK CDRW321040B, ATAPI CD/DVD-ROM drive
> card 00:09.0 SCSI storage controller: Artop Electronic Corp ATP865
> (rev 02)
>
> (the SCSI storage is really PCI IDE card)
>
> many of you are probably aware that it is a common problem for
> VT82C693A/694x based MBs not to be able to rip audio CDs under linux
> (usual message is 'lost interrupt').
>
> I have heard that updating the BIOS might help in some cases so I
> tried that and here's what happened (_few_ related problems listed
> below).
>
> -----------------------------------------------------------
> fun with PCI DIE card
> -----------------------------------------------------------
>
> during boot there is strange message when probing PCI IDE card (STSTUS
> instead of ALTSTATUS error message):
>
> Aug 21 23:47:29 localhost kernel: Uniform Multi-Platform E-IDE driver
> Revision: 6.31
> Aug 21 23:47:29 localhost kernel: ide: Assuming 33MHz system bus speed
> for PIO modes; override with idebus=xx
> Aug 21 23:47:29 localhost kernel: VP_IDE: IDE controller on PCI bus 00
> dev 39
> Aug 21 23:47:29 localhost kernel: VP_IDE: chipset revision 6
> Aug 21 23:47:29 localhost kernel: VP_IDE: not 100%% native mode: will
> probe irqs later
> Aug 21 23:47:29 localhost kernel: VP_IDE: VIA vt82c686b (rev 40) IDE
> UDMA100 controller on pci00:07.1
> Aug 21 23:47:29 localhost kernel: ide0: BM-DMA at 0xc000-0xc007,
> BIOS settings: hda:DMA, hdb:DMA
> Aug 21 23:47:29 localhost kernel: ide1: BM-DMA at 0xc008-0xc00f,
> BIOS settings: hdc:DMA, hdd:pio
> Aug 21 23:47:29 localhost kernel: hda: WDC AC22000L, ATA DISK drive
> Aug 21 23:47:29 localhost kernel: hdb: Maxtor 94098U8, ATA DISK drive
> Aug 21 23:47:29 localhost kernel: hdc: FX810T4, ATAPI CD/DVD-ROM drive
> Aug 21 23:47:29 localhost kernel: hde: probing with STATUS(0x51) instead
> of ALTSTATUS(0xff)
> Aug 21 23:47:29 localhost last message repeated 2 times
> Aug 21 23:47:29 localhost kernel: hde: TDK CDRW321040B, ATAPI CD/DVD-ROM
> drive
> Aug 21 23:47:29 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Aug 21 23:47:29 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Aug 21 23:47:29 localhost kernel: ide2 at 0xcc00-0xcc07,0xd000 on irq 11
> Aug 21 23:47:29 localhost kernel: hda: 3907008 sectors (2000 MB)
> w/256KiB Cache, CHS=969/64/63, UDMA(33)
> Aug 21 23:47:29 localhost kernel: hdb: 80041248 sectors (40981 MB)
> w/2048KiB Cache, CHS=4982/255/63, UDMA(66)
> Aug 21 23:47:29 localhost kernel: Partition check:
> Aug 21 23:47:29 localhost kernel: hda: hda1 hda2 hda3 hda4
> Aug 21 23:47:29 localhost kernel: hdb: hdb1 < hdb5 hdb6 hdb7 > hdb2
>
>
> -----------------------------------------------------------
> even more fun with usb
> -----------------------------------------------------------
>
> USB didn't work before because it is on the same interrupt as PCI IDE
> card but this time I get:
>
> ...
> Aug 21 23:44:11 localhost kernel: lp0: using parport0 (polling).
> Aug 21 23:44:11 localhost kernel: lp0: console ready
> Aug 21 23:44:11 localhost kernel: Unable to handle kernel NULL pointer
> dereference at virtual address 000000b8
> Aug 21 23:44:11 localhost kernel: printing eip:
> Aug 21 23:44:11 localhost kernel: d8856644
> Aug 21 23:44:11 localhost kernel: *pde = 00000000
> Aug 21 23:44:11 localhost kernel: Oops: 0000
> Aug 21 23:44:11 localhost kernel: CPU: 0
> Aug 21 23:44:11 localhost kernel: EIP:
> 0010:[8139too:__insmod_8139too_O/lib/modules/2.4.18/kernel/drivers/net/81+-31164/96]
> Not tainted
> Aug 21 23:44:11 localhost kernel: EFLAGS: 00010286
> Aug 21 23:44:11 localhost kernel: eax: d6d1a000 ebx: 00000000 ecx:
> c01daae8 edx: 00000000
> Aug 21 23:44:11 localhost kernel: esi: 00000000 edi: d6d1a000 ebp:
> 00000000 esp: d6d65f48
> Aug 21 23:44:11 localhost kernel: ds: 0018 es: 0018 ss: 0018
> Aug 21 23:44:11 localhost kernel: Process usb (pid: 314,
> stackpage=d6d65000)
> Aug 21 23:44:11 localhost kernel: Stack: d75df2e0 00000000 d7321680
> d885a740 00000000 d88568f6 d6d65fa4 d6d65fa8
> Aug 21 23:44:11 localhost kernel: d6d65f94 d7321680 00000000
> d75df2c0 00000000 00000000 00000000 00000000
> Aug 21 23:44:11 localhost kernel: d7321660 ffffffea 00000400
> 00000000 00000000 c012d7d6 d7321660 40015000
> Aug 21 23:44:11 localhost kernel: Call Trace:
> [8139too:__insmod_8139too_O/lib/modules/2.4.18/kernel/drivers/net/81+-14528/96]
> [8139too:__insmod_8139too_O/lib/modules/2.4.18/kernel/drivers/net/81+-30474/96]
> [sys
> _read+150/228] [system_call+51/56]
> Aug 21 23:44:11 localhost kernel:
> Aug 21 23:44:11 localhost kernel: Code: 8b 82 b8 00 00 00 85 c0 74 08 89
> eb 83 38 ff 0f 45 18 8b 4c
>
> at least I assume it's usb, when I disable usb in BIOS setup it works
> (that why I am able to write this email:-)
>
> -----------------------------------------------------------
> on board ide and cdrom ripping
> -----------------------------------------------------------
>
> cd ripping still does not work but I get quite different messages, no
> 'lost interrupt' but:
>
> Aug 21 23:52:38 localhost kernel: hdc: packet command error: status=0x51
> { DriveReady SeekComplete Error }
> Aug 21 23:52:38 localhost kernel: hdc: packet command error: error=0xb0
> Aug 21 23:52:38 localhost kernel: ATAPI device hdc:
> Aug 21 23:52:38 localhost kernel: Error: Aborted command -- (Sense
> key=0x0b)
> Aug 21 23:52:38 localhost kernel: (vendor-specific error) --
> (asc=0xbf, ascq=0x00)
> Aug 21 23:52:38 localhost kernel: The failed "Read CD" packet command
> was:
> Aug 21 23:52:38 localhost kernel: "be 04 00 00 09 01 00 00 08 f8 00 00
> "
>
> this set of messages is repeated as long as I try to rip CD.
>
> BTW ripping on the other CDROM (/dev/hde, on PCI IDE card) still works
> OK.
>
> any advices on any of above:
>
> - is it possible to make cd ripping work?
> - is it possible to make USB work even if it shares interrupt with PCI
> IDE card?
> - any ideas why I'm getting ALTSTATUS message now (it wasn't there
> before)
>
> TIA
>
> erik
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

Andre Hedrick
LAD Storage Consulting Group

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.050 / U:3.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site