Messages in this thread |  | | Date | Wed, 21 Aug 2002 21:33:55 -0400 (EDT) | From | Andy Smith <> | Subject | ENOMEM in do_get_write_access, retrying. |
| |
ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in journal_alloc_journal_head, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying.
Hi All,
I am getting a bunch of these in my messages file while cp'ing files from one computer 2 another. Both machines have 3c996 gigabit and large disk arrays. The computer with the errors is receiving the files.
The computer with the errors has:
Tyan S2462 Mobo with dual AMD Athlon 1900+ MP cpus 2GB Memory 3c996 gigabit card 1.76TB scsi raid array attached to onboard adaptec U160 SCSI card. Redhat Linux 7.3 with updates running 2.4.18-5smp
Below is the output of dmesg.
What's Up?
Thanks -Andy
---------
Linux version 2.4.18-5smp (bhcompile@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 SMP Mon Jun 10 15:01:05 EDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff6c00 (ACPI data) BIOS-e820: 000000007fff6c00 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f74d0 hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 524272 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294896 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: TYAN Product ID: GUINNESS APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 16 Processor #0 Pentium(tm) Pro APIC version 16 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Kernel command line: ro root=/dev/sda2 Initializing CPU#0 Detected 1592.928 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3178.49 BogoMIPS Memory: 2064568k/2097088k available (1225k kernel code, 32132k reserved, 851k data, 316k init, 1179584k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU0: AMD Athlon(tm) MP 1900+ stepping 02 per-CPU timeslice cutoff: 731.57 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3185.04 BogoMIPS CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU1: AMD Athlon(tm) Processor stepping 02 Total of 2 processors activated (6363.54 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 1 1 0 1 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 0 0 0 0 1 1 71 0a 003 03 1 1 0 1 0 1 1 79 0b 003 03 1 1 0 1 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1592.8588 MHz. ..... host bus clock speed is 265.4764 MHz. cpu: 0, clocks: 2654764, slice: 884921 CPU0<T0:2654752,T1:1769824,D:7,S:884921,C:2654764> cpu: 1, clocks: 2654764, slice: 884921 CPU1<T0:2654752,T1:884896,D:14,S:884921,C:2654764> checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfd7c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent BIOS failed to enable PCI standards compliance, fixing this error. I/O APIC: AMD Errata #22 may be present. In the event of instability try : booting with the "noapic" option. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd allocated 64 pages and 64 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 1024 slots per queue, batch=256 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7411: IDE controller on PCI bus 00 dev 39 AMD7411: chipset revision 1 AMD7411: not 100% native mode: will probe irqs later AMD7411: disabling single-word DMA support (revision < C4) ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: FX54++W, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 244k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.6 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.6 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
Vendor: IBM Model: IC35L018UWD210-0 Rev: S5BS Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Vendor: Model: Rev: 0001 Type: Direct-Access ANSI SCSI revision: 03 scsi1:A:2:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi1, channel 0, id 2, lun 0 (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) Partition check: sda: sda1 sda2 sda3 sda4 < sda5 > (scsi1:A:2): 160.000MB/s transfers (80.000MHz DT, offset 31, 16bit) SCSI device sdb: -773160960 512-byte hdwr sectors (-395857 MB) sdb: unknown partition table Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 316k freed Adding Swap: 1020116k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xc00dc000, IRQ 11 usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,2), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected ip_conntrack (8192 buckets, 65536 max) tg3.c:v0.98 (Mar 28, 2002) eth0: Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:64-bit) 10/100/1000BaseT Ethernet 00:04:76:f4:f1:53 eth0: Link is up at 100 Mbps, full duplex. eth0: Flow control is on for TX and on for RX. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0f.0: 3Com PCI 3c980C Python-T at 0x1c00. Vers LK1.1.17 00:10.0: 3Com PCI 3c980C Python-T at 0x1c80. Vers LK1.1.17 SCSI device sdb: -773160960 512-byte hdwr sectors (-395857 MB) sdb: sdb1 SCSI device sdb: -773160960 512-byte hdwr sectors (-395857 MB) sdb: sdb1 (scsi1:A:2:0): Locking max tag count at 123 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,17), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: Link is down. eth0: Link is up at 1000 Mbps, full duplex. eth0: Flow control is on for TX and on for RX. nfs: server cetus08 is not responding nfs: server cetus08 OK Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in journal_alloc_journal_head, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in journal_alloc_journal_head, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying. ENOMEM in do_get_write_access, retrying.
------------------------------------------------------------------------- Andrew Smith (301) 405-2152 Department of Physics asmith@umdgrb.umd.edu University of Maryland College Park, MD 20742-4111 -------------------------------------------------------------------------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |