lkml.org 
[lkml]   [2002]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: More VIA chipset fun?
From
Mart,

I have the same issue, although I also get them while browsing.
Always within 10 minutes after bootup, after a reset everything is ok
(most of the time.

I also noticed that removing cards delays the effect. I removed my cs4261
based soundcard and switched to the onboard sound. But still experience
the problems.

There was a patch in 2.4.20-pre1 and 2.4.19-jp14 for the amd agp cache
corruption but that didn't work for me, did you test it as well?

My system setup is
Athlon 1700XP
Epox 8kta3 (=KT133A chipset)
Onboard sound/Terratec DMX Xfire 1024 (CS4261 chipset)
Intel eepro 100 NIC
Adaptec 2940u2w card
Lite-on ide writer
Asus cdrom
512MB memory
Nvida GF4400 ti

I also tested on a radeon 7200 but the same effects occur.

I don't know why this is happening and as the system completely freezes
there is nothing I can do about it to debug it.

Regards,

Tommy

> Folks,
>
> Here's what I hope is a minor question: On my system I am getting
> persistent lockups when doing anything that requires high-volume
> transfers to the graphics card.
>
> It appears mostly in texture-heavy OpenGL applications (like Return to
> Castle Wolfenstein), but it will also sporadically happen when playing
> DVDs.
>
> I've tried to diagnose it more specifically, but I'm currently stumped.
> My kernel just locks up, not even being responsive to the magic SysRq-K
> combination. It has gotten a little more stable after I switched the
> cards around so the Soundblaster Live! is no longer sharing an IRQ with
> the graphics card, and removing my old RTL8139 NIC seems to have helped
> a little too, but the problem persists to this day.
>
> A bug report in the DRI bug database has some people with comparable
> configurations reporting the same problem. The common factor seems to be
> a VIA 686b Southbridge. Because of this, I finally decided to ask your
> advice, as this may be outside the scope of the DRI project.
>
> <URL:
> http://sourceforge.net/tracker/index.php?func=detail&aid=522096&group_id=387&atid=100387>
> Some generic info (output of lspci, dmesg, lsmod and XFree86.log
> follows):
>
> System:
>
> AMD Athlon XP1600 CPU
> MSI K7T Pro2 Motherboard (VIA KT266a chipset)
> Matrox MG450DH video card
> 512M DDR RAM
>
> Kernel:
>
> 2.4.18 with O(1) scheduler and pre-empt patches.
> I2C modules (for monitoring my motherboard sensors)
> ALSA 0.9
>
> Problems have also been observed on an unpatched 2.4.17 and 2.4.18.
>
> Anybody not trying to do diagnostics can skip the rest of this message,
> as this is the promised output of above commands.
>
> If more information is needed, I am willing to provide it. Just ask what
> is necessary. This is not urgent for me, but I'd like to see it fixed,
> and if I can help fix it, I would be grateful for the experience it
> would give me.
>
> Thanks,
>
> Mart van de Wege
>
> lspci -vv output:
>
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
> Subsystem: VIA Technologies, Inc.: Unknown device 0000
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8
> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
> Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if
> 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> Memory behind bridge: dee00000-dfefffff
> Prefetchable memory behind bridge: dac00000-decfffff
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 11)
> Subsystem: TERRATEC Electronic GmbH: Unknown device 1134
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 31
> (4000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at dedfe000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
> (rev 11)
> Subsystem: TERRATEC Electronic GmbH: Unknown device 1134
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64
> (1000ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at dedff000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:06.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
> 07)
> Subsystem: Creative Labs SBLive! Player 5.1
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16
> (500ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at e400 [size=32]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:06.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
> (rev 07)
> Subsystem: Creative Labs Gameport Joystick
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64
> Region 0: I/O ports at ec00 [size=8]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:07.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
> (rev 78)
> Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management
> NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64
> (2500ns min, 2500ns max), cache line size 08
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at e000 [size=128]
> Region 1: Memory at dfffef80 (32-bit, non-prefetchable) [size=128]
> Expansion ROM at dffa0000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2
> PME-
>
> 00:08.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02)
> Subsystem: Adaptec 19160 Ultra160 SCSI Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64
> (10000ns min, 6250ns max), cache line size 08
> Interrupt: pin A routed to IRQ 19
> BIST result: 00
> Region 0: I/O ports at e800 [disabled] [size=256]
> Region 1: Memory at dffff000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at dffc0000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
> Subsystem: VIA Technologies, Inc.: Unknown device 0000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
> (prog-if 8a [Master SecP PriP])
> Subsystem: VIA Technologies, Inc. Bus Master IDE
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32
> Region 4: I/O ports at fc00 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64,
> cache line size 08
> Interrupt: pin D routed to IRQ 10
> Region 4: I/O ports at d400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64,
> cache line size 08
> Interrupt: pin D routed to IRQ 10
> Region 4: I/O ports at d800 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 00:11.4 USB Controller: VIA Technologies, Inc. USB (rev 1b) (prog-if 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64,
> cache line size 08
> Interrupt: pin D routed to IRQ 10
> Region 4: I/O ports at dc00 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
>
> 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP
> (rev 85) (prog-if 00 [VGA])
> Subsystem: Matrox Graphics, Inc. Millennium G450 32Mb SDRAM Dual Head
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16
> (4000ns min, 8000ns max), cache line size 08
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at dc000000 (32-bit, prefetchable) [size=32M]
> Region 1: Memory at dfefc000 (32-bit, non-prefetchable) [size=16K]
> Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=8M]
> Expansion ROM at dfec0000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0
> PME-
> Capabilities: [f0] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
> Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
>
> dmesg output (with some ext3 diagnostics snipped, this was after a
> lockup):
>
> 00
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
> CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
> CPU: AMD Athlon(tm) XP 1600+ stepping 02
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000080
> ESR value after enabling vector: 00000000
> ENABLING IO-APIC IRQs
> Setting 2 in the phys_id_present_map
> ...changing IO-APIC physical APIC ID to 2 ... ok.
> init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-5, 2-11, 2-20, 2-21, 2-22, 2-23 not
> connected.
> ..TIMER: vector=0x31 pin1=2 pin2=0
> number of MP IRQ sources: 22.
> number of IO-APIC #2 registers: 24.
> testing the IO APIC.......................
>
> IO APIC #2......
> .... register #00: 02000000
> ....... : physical APIC id: 02
> .... register #01: 00178011
> ....... : max redirection entries: 0017
> ....... : PRQ implemented: 1
> ....... : IO APIC version: 0011
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00 1 0 0 0 0 0 0 00
> 01 001 01 0 0 0 0 0 1 1 39
> 02 001 01 0 0 0 0 0 1 1 31
> 03 001 01 0 0 0 0 0 1 1 41
> 04 001 01 0 0 0 0 0 1 1 49
> 05 000 00 1 0 0 0 0 0 0 00
> 06 001 01 0 0 0 0 0 1 1 51
> 07 001 01 0 0 0 0 0 1 1 59
> 08 001 01 0 0 0 0 0 1 1 61
> 09 001 01 0 0 0 0 0 1 1 69
> 0a 001 01 1 1 0 1 0 1 1 71
> 0b 000 00 1 0 0 0 0 0 0 00
> 0c 001 01 0 0 0 0 0 1 1 79
> 0d 001 01 0 0 0 0 0 1 1 81
> 0e 001 01 0 0 0 0 0 1 1 89
> 0f 001 01 0 0 0 0 0 1 1 91
> 10 001 01 1 1 0 1 0 1 1 99
> 11 001 01 1 1 0 1 0 1 1 A1
> 12 001 01 1 1 0 1 0 1 1 A9
> 13 001 01 1 1 0 1 0 1 1 B1
> 14 000 00 1 0 0 0 0 0 0 00
> 15 000 00 1 0 0 0 0 0 0 00
> 16 000 00 1 0 0 0 0 0 0 00
> 17 000 00 1 0 0 0 0 0 0 00
> IRQ to pin mappings:
> IRQ0 -> 0:2
> IRQ1 -> 0:1
> IRQ3 -> 0:3
> IRQ4 -> 0:4
> IRQ6 -> 0:6
> IRQ7 -> 0:7
> IRQ8 -> 0:8
> IRQ9 -> 0:9
> IRQ10 -> 0:10
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ15 -> 0:15
> IRQ16 -> 0:16
> IRQ17 -> 0:17
> IRQ18 -> 0:18
> IRQ19 -> 0:19
> .................................... done.
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 1399.7491 MHz.
> ..... host bus clock speed is 266.6187 MHz.
> cpu: 0, clocks: 2666187, slice: 1333093
> CPU0<T0:2666176,T1:1333072,D:11,S:1333093,C:2666187>
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> PCI: Using IRQ router default [1106/3074] at 00:11.0
> PCI->APIC IRQ transform: (B0,I5,P0) -> 16
> PCI->APIC IRQ transform: (B0,I5,P0) -> 16
> PCI->APIC IRQ transform: (B0,I6,P0) -> 17
> PCI->APIC IRQ transform: (B0,I7,P0) -> 18
> PCI->APIC IRQ transform: (B0,I8,P0) -> 19
> PCI->APIC IRQ transform: (B0,I17,P3) -> 10
> PCI->APIC IRQ transform: (B0,I17,P3) -> 10
> PCI->APIC IRQ transform: (B0,I17,P3) -> 10
> PCI->APIC IRQ transform: (B1,I0,P0) -> 16
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
> Starting kswapd
> Journalled Block Device driver loaded
> devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x1
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> block: 128 slots per queue, batch=32
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio ide1:
> BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
> hdc: LITEON DVD-ROM LTD122, ATAPI CD/DVD-ROM drive
> hdd: R/RW 12x8x32, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> ide-cd: passing drive hdd to ide-scsi emulation.
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> PPP generic driver version 2.4.1
> PPP Deflate Compression module registered
> PPP BSD Compression module registered
> SCSI subsystem driver Revision: 1.00
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
> <Adaptec 19160B Ultra160 SCSI adapter>
> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
> Vendor: QUANTUM Model: ATLAS_V__9_SCA Rev: 0230
> Type: Direct-Access ANSI SCSI revision: 03
> (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
> Vendor: QUANTUM Model: ATLAS_V__9_SCA Rev: 0230
> Type: Direct-Access ANSI SCSI revision: 03
> (scsi0:A:2): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
> Vendor: QUANTUM Model: ATLAS_V__9_SCA Rev: 0230
> Type: Direct-Access ANSI SCSI revision: 03
> (scsi0:A:4): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
> scsi0:A:0:0: Tagged Queuing enabled. Depth 253
> scsi0:A:2:0: Tagged Queuing enabled. Depth 253
> scsi0:A:4:0: Tagged Queuing enabled. Depth 253
> scsi1 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: IDE-CD Model: R/RW 12x8x32 Rev: 1.2
> Type: CD-ROM ANSI SCSI revision: 02
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> Attached scsi disk sdb at scsi0, channel 0, id 2, lun 0
> Attached scsi disk sdc at scsi0, channel 0, id 4, lun 0
> SCSI device sda: 17930694 512-byte hdwr sectors (9181 MB)
> Partition check:
> /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
> SCSI device sdb: 17930694 512-byte hdwr sectors (9181 MB)
> /dev/scsi/host0/bus0/target2/lun0: p1 p2
> SCSI device sdc: 17930694 512-byte hdwr sectors (9181 MB)
> /dev/scsi/host0/bus0/target4/lun0: p1
> Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
> sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 32768)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: sd(8,1): orphan cleanup on readonly fs
> <snip>
> EXT3-fs: sd(8,1): 77 orphan inodes deleted
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Mounted devfs on /dev
> Freeing unused kernel memory: 208k freed
> Adding Swap: 498004k swap-space (priority -1)
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,1), internal journal
> gameport0: Emu10k1 Gameport at 0xec00 size 8 speed 1193 kHz
> input0: Analog 3-axis 4-button joystick at gameport0.0 [TSC timer, 1397
> MHz clock, 863 ns res] Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: Detected Via Apollo Pro KT266 chipset
> agpgart: AGP aperture is 128M @ 0xe0000000
> [drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 128MB
> [drm] Initialized mga 3.0.2 20010321 on minor 0
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 00:07.0: 3Com PCI 3c905C Tornado at 0xe000. Vers LK1.1.16
> i2c-core.o: i2c core module
> i2c-proc.o version 2.6.1 (20010825)
> w83781d.o version 2.6.3 (20020322)
> i2c-core.o: driver W83781D sensor driver registered.
> i2c-isa.o version 2.6.3 (20020322)
> i2c-core.o: client [W83627HF chip] registered to adapter [ISA main
> adapter](pos. 0). i2c-core.o: adapter ISA main adapter registered as
> adapter 0.
> i2c-isa.o: ISA bus access for i2c modules initialized.
> reiserfs: checking transaction log (device 08:03) ...
> reiserfs: replayed 63 transactions in 2 seconds
> Using r5 hash to sort names
> ReiserFS version 3.6.25
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,33), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,18), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,17), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
> parport0: irq 7 detected
> lp0: using parport0 (polling).
> lp0: compatibility mode
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb.c: registered new driver hiddev
> usb.c: registered new driver hid
> hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
> hid-core.c: USB HID support drivers
> mice: PS/2 mouse device common for all mice
> VFS: Disk change detected on device ide1(22,0)
> ip_tables: (C) 2000-2002 Netfilter core team
> ip_conntrack (4095 buckets, 32760 max)
> Linux video capture interface: v1.00
> i2c-algo-bit.o: i2c bit algorithm module
> bttv: driver version 0.7.83 loaded
> bttv: using 2 buffers with 2080k (4160k total) for capture
> bttv: Host bridge is VIA Technologies, Inc. VT8367 [KT266]
> bttv: Bt8xx card found (0).
> bttv0: Bt878 (rev 17) at 00:05.0, irq: 16, latency: 31, memory:
> 0xdedfe000 bttv0: detected: Terratec TValue [card=33], PCI subsystem ID
> is 153b:1134 bttv0: using: BT878(Terratec TerraTValue)
> [card=33,autodetected]
> i2c-core.o: adapter bt848 #0 registered as adapter 1.
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known chips:
> tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
> (PV951) i2c-core.o: driver generic i2c audio driver registered.
> i2c-core.o: driver i2c TV tuner driver registered.
> tuner: chip found @ 0xc0
> bttv0: i2c attach [client=Philips PAL,ok]
> i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos.
> 0). bttv0: PLL: 28636363 => 35468950 ... ok
> (scsi0:A:2:0): Locking max tag count at 64
> (scsi0:A:0:0): Locking max tag count at 64
> lp0: compatibility mode
> lp0: compatibility mode
> lp0: compatibility mode
> lp0: compatibility mode
> VFS: Disk change detected on device ide1(22,0)
>
> lsmod output:
>
> Module Size Used by Not tainted
> tuner 8160 1 (autoclean)
> tvaudio 9852 0 (autoclean) (unused)
> bttv 61120 0
> i2c-algo-bit 7112 1 [bttv]
> videodev 4960 2 [bttv]
> ipt_MASQUERADE 1304 1 (autoclean)
> iptable_nat 13816 1 (autoclean) [ipt_MASQUERADE]
> ip_conntrack 14552 1 (autoclean) [ipt_MASQUERADE
> iptable_nat] iptable_filter 1704 1 (autoclean)
> ip_tables 10872 5 [ipt_MASQUERADE iptable_nat
> iptable_filter] mousedev 3928 1
> hid 19300 0 (unused)
> usbcore 50912 1 [hid]
> nfsd 66928 8 (autoclean)
> lockd 48528 1 (autoclean) [nfsd]
> sunrpc 63484 1 (autoclean) [nfsd lockd]
> parport_pc 21992 1 (autoclean)
> lp 6240 0 (autoclean)
> parport 25632 1 (autoclean) [parport_pc lp]
> snd-seq-midi 3232 0 (autoclean) (unused)
> snd-emu10k1-synth 3932 0 (autoclean) (unused)
> snd-emux-synth 24544 0 (autoclean) [snd-emu10k1-synth]
> snd-seq-midi-emul 4480 0 (autoclean) [snd-emux-synth]
> snd-seq-virmidi 2696 0 (autoclean) [snd-emux-synth]
> snd-seq-oss 23616 0 (unused)
> snd-seq-midi-event 3288 0 [snd-seq-midi snd-seq-virmidi
> snd-seq-oss] snd-seq 39120 2 [snd-seq-midi
> snd-emux-synth snd-seq-midi-emul snd-seq-virmidi snd-seq-oss
> snd-seq-midi-event] snd-pcm-oss 36036 1
> snd-mixer-oss 9404 0
> snd-emu10k1 57964 1 [snd-emu10k1-synth]
> snd-pcm 51712 0 [snd-pcm-oss snd-emu10k1]
> snd-timer 10984 0 [snd-seq snd-pcm]
> snd-rawmidi 13536 0 [snd-seq-midi snd-seq-virmidi
> snd-emu10k1] snd-seq-device 3888 0 [snd-seq-midi
> snd-emu10k1-synth snd-emux-synth snd-seq-oss snd-seq snd-emu10k1
> snd-rawmidi] snd-ac97-codec 23492 0 [snd-emu10k1]
> snd-util-mem 1216 0 [snd-emux-synth snd-emu10k1]
> snd-hwdep 3680 0 [snd-emu10k1]
> snd 27020 0 [snd-seq-midi snd-emux-synth
> snd-seq-virmidi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss
> snd-mixer-oss snd-emu10k1 snd-pcm snd-timer snd-rawmidi snd-seq-device
> snd-ac97-codec snd-util-mem snd-hwdep] soundcore 3812 10
> [snd]
> reiserfs 156016 1 (autoclean)
> i2c-isa 1196 0 (unused)
> w83781d 18748 0 (unused)
> i2c-proc 6320 0 [w83781d]
> i2c-core 12932 0 [tuner tvaudio bttv i2c-algo-bit
> i2c-isa w83781d i2c-proc] 3c59x 25232 1
> mga 104504 1
> agpgart 13544 3
> analog 7488 0 (unused)
> emu10k1-gp 1224 0 (unused)
> gameport 1548 0 [analog emu10k1-gp]
> joydev 6880 0 (unused)
>
> XFree86 startup log:
>
> This is a pre-release version of XFree86, and is not supported in any
> way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
> to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
> please check the latest version in the XFree86 CVS repository
> (http://www.XFree86.Org/cvs)
>
> XFree86 Version 4.1.0.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6510)
> Release Date: 21 December 2001
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/FAQ)
> Build Operating System: Linux 2.4.18 i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Sun Aug 18 16:20:26 2002
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Medion 1772ie"
> (**) | |-->Device "Matrox G450DH"
> (**) |-->Input Device "Generic Keyboard"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc105"
> (**) XKB: model: "pc105"
> (**) Option "XkbLayout" "us_intl"
> (**) XKB: layout: "us_intl"
> (**) Option "XkbOptions" "grp:switch"
> (**) XKB: options: "grp:switch"
> (==) Keyboard: CustomKeycode disabled
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Generic Mouse"
> (WW) `fonts.dir' not found (or not valid) in
> "/usr/lib/X11/fonts/cyrillic".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/lib/X11/fonts/cyrillic").
> (**) FontPath set to
> "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (++) using VT number 7
>
> (II) Open APM successful
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.1
> XFree86 Video Driver: 0.4
> XFree86 XInput driver : 0.2
> XFree86 Server Extension : 0.1
> XFree86 Font Renderer : 0.2
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x8001000c, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1106,3099 card 1106,0000 rev 00 class 06,00,00
> hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class
> 06,04,00 hdr 01 (II) PCI: 00:05:0: chip 109e,036e card 153b,1134 rev 11
> class 04,00,00 hdr 80 (II) PCI: 00:05:1: chip 109e,0878 card 153b,1134
> rev 11 class 04,80,00 hdr 80 (II) PCI: 00:06:0: chip 1102,0002 card
> 1102,8061 rev 07 class 04,01,00 hdr 80 (II) PCI: 00:06:1: chip 1102,7002
> card 1102,0020 rev 07 class 09,80,00 hdr 80 (II) PCI: 00:07:0: chip
> 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00 (II) PCI: 00:08:0:
> chip 9005,0081 card 9005,62a1 rev 02 class 01,00,00 hdr 00 (II) PCI:
> 00:11:0: chip 1106,3074 card 1106,0000 rev 00 class 06,01,00 hdr 80 (II)
> PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
> (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00
> hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class
> 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b
> class 0c,03,00 hdr 00 (II) PCI: 01:00:0: chip 102b,0525 card 102b,0641
> rev 85 class 03,00,00 hdr 00 (II) PCI: End of PCI scan
> (II) LoadModule: "scanpci"
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (II) Host-to-PCI bridge:
> (II) PCI-to-ISA bridge:
> (II) PCI-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
> (II) Bus 1 I/O range:
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0 0xdee00000 - 0xdfefffff (0x1100000) MX[B]
> (II) Bus 1 prefetchable memory range:
> [0] -1 0 0xdac00000 - 0xdecfffff (0x4100000) MX[B]
> (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is
> set) (II) Bus -1 I/O range:
> (II) Bus -1 non-prefetchable memory range:
> (II) Bus -1 prefetchable memory range:
> (--) PCI: (0:5:0) BrookTree unknown chipset (0x036e) rev 17, Mem @
> 0xdedfe000/12 (--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 133, Mem @
> 0xdc000000/25, 0xdfefc000/14, 0xdf000000/23, BIOS @ 0xdfec0000/17 (II)
> Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> [0] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
> [1] -1 0 0xdedff000 - 0xdedfffff (0x1000) MX[B]
> [2] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
> [3] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
> [4] -1 0 0xdf000000 - 0xdf7fffff (0x800000) MX[B](B)
> [5] -1 0 0xdfefc000 - 0xdfefffff (0x4000) MX[B](B)
> [6] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B](B)
> [7] -1 0 0xdedfe000 - 0xdedfefff (0x1000) MX[B](B)
> [8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
> [9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [11] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
> [12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> [13] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [14] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
> [15] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
> [1] -1 0 0xdedff000 - 0xdedfffff (0x1000) MX[B]
> [2] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
> [3] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
> [4] -1 0 0xdf000000 - 0xdf7fffff (0x800000) MX[B](B)
> [5] -1 0 0xdfefc000 - 0xdfefffff (0x4000) MX[B](B)
> [6] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B](B)
> [7] -1 0 0xdedfe000 - 0xdedfefff (0x1000) MX[B](B)
> [8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
> [9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [11] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
> [12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> [13] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [14] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
> [15] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
> [6] -1 0 0xdedff000 - 0xdedfffff (0x1000) MX[B]
> [7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
> [8] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
> [9] -1 0 0xdf000000 - 0xdf7fffff (0x800000) MX[B](B)
> [10] -1 0 0xdfefc000 - 0xdfefffff (0x4000) MX[B](B)
> [11] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B](B)
> [12] -1 0 0xdedfe000 - 0xdedfefff (0x1000) MX[B](B)
> [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
> [16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [18] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
> [19] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> [20] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [21] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
> [22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
> (II) LoadModule: "GLcore"
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) LoadModule: "bitmap"
> (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Loading font Bitmap
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.1.9
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font FreeType
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Loading extension GLX
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "pex5"
> (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
> (II) Module pex5: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension X3D-PEX
> (II) LoadModule: "record"
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.13.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension RECORD
> (II) LoadModule: "speedo"
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Speedo
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "xie"
> (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> (II) Module xie: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension XIE
> (II) LoadModule: "mga"
> (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
> (II) Module mga: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.1
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.2
> (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
> mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
> (II) Primary Device is: PCI 01:00:0
> (--) Assigning device section with no busID to primary device
> (--) Chipset mgag400 found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
> [6] -1 0 0xdedff000 - 0xdedfffff (0x1000) MX[B]
> [7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
> [8] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
> [9] -1 0 0xdf000000 - 0xdf7fffff (0x800000) MX[B](B)
> [10] -1 0 0xdfefc000 - 0xdfefffff (0x4000) MX[B](B)
> [11] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B](B)
> [12] -1 0 0xdedfe000 - 0xdedfefff (0x1000) MX[B](B)
> [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
> [16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [18] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
> [19] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> [20] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [21] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
> [22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
> (II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
> [6] -1 0 0xdedff000 - 0xdedfffff (0x1000) MX[B]
> [7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
> [8] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
> [9] -1 0 0xdf000000 - 0xdf7fffff (0x800000) MX[B](B)
> [10] -1 0 0xdfefc000 - 0xdfefffff (0x4000) MX[B](B)
> [11] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B](B)
> [12] -1 0 0xdedfe000 - 0xdedfefff (0x1000) MX[B](B)
> [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [18] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
> [19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [21] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
> [22] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> [23] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [24] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
> [25] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.4
> (**) MGA(0): Depth 24, (--) framebuffer bpp 32
> (==) MGA(0): RGB weight 888
> (II) Loading sub module "mga_hal"
> (II) LoadModule: "mga_hal"
> (WW) Warning, couldn't open module mga_hal
> (II) UnloadModule: "mga_hal"
> (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0)
> (II) MGA(0): Matrox HAL module not found - using builtin mode setup
> instead (--) MGA(0): Chipset: "mgag400"
> (==) MGA(0): Using AGP 1x mode
> (--) MGA(0): Linear framebuffer at 0xDC000000
> (--) MGA(0): MMIO registers at 0xDFEFC000
> (--) MGA(0): Pseudo-DMA transfer window at 0xDF000000
> (--) MGA(0): BIOS at 0xDFEC0000
> (--) MGA(0): Video BIOS info block at offset 0x07CA0
> (WW) MGA(0): Video BIOS info block not detected!
> (II) MGA(0): MGABios.RamdacType = 0x0
> (==) MGA(0): Write-combining range (0xdc000000,0x2000000)
> (--) MGA(0): VideoRAM: 32768 kByte
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/X11R6/lib/modules/libi2c.a
> (II) Module i2c: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.2.0
> ABI class: XFree86 Video Driver, version 0.4
> (==) MGA(0): Write-combining range (0xdc000000,0x2000000)
> (II) MGA(0): I2C bus "DDC" initialized.
> (II) MGA(0): I2C device "DDC:ddc2" registered.
> (II) MGA(0): I2C device "DDC:ddc2" removed.
> (II) MGA(0): I2C device "DDC:ddc2" registered.
> (II) MGA(0): I2C device "DDC:ddc2" removed.
> (II) MGA(0): I2C Monitor info: 0x862af60
> (II) MGA(0): Manufacturer: MED Model: 1772 Serial#: 4184
> (II) MGA(0): Year: 1999 Week: 23
> (II) MGA(0): EDID Version: 1.1
> (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
> (II) MGA(0): Sync: Separate Composite
> (II) MGA(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23
> (II) MGA(0): Gamma: 2.67
> (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) MGA(0): redX: 0.619 redY: 0.345 greenX: 0.290 greenY: 0.609 (II)
> MGA(0): blueX: 0.154 blueY: 0.064 whiteX: 0.280 whiteY: 0.311 (II)
> MGA(0): Supported VESA Video Modes:
> (II) MGA(0): 720x400@70Hz
> (II) MGA(0): 640x480@60Hz
> (II) MGA(0): 640x480@75Hz
> (II) MGA(0): 800x600@72Hz
> (II) MGA(0): 800x600@75Hz
> (II) MGA(0): 1024x768@60Hz
> (II) MGA(0): 1024x768@70Hz
> (II) MGA(0): 1024x768@75Hz
> (II) MGA(0): Manufacturer's mask: 0
> (II) MGA(0): Supported Future Video Modes:
> (II) MGA(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
> (II) MGA(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
> (II) MGA(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
> (II) MGA(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
> (II) MGA(0): Monitor
> (II) MGA(0): Monitor
> (II) MGA(0): Monitor
> (II) MGA(0): Monitor
> (II) MGA(0): end of I2C Monitor info
>
> (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) MGA(0): Min pixel clock is 12 MHz
> (==) MGA(0): Max pixel clock is 360 MHz
> (II) MGA(0): Medion 1772ie: Using hsync range of 31.50-72.00 kHz
> (II) MGA(0): Medion 1772ie: Using vrefresh range of 50.00-120.00 Hz (II)
> MGA(0): Clock range: 12.00 to 360.00 MHz
> (II) MGA(0): Not using default mode "1280x960" (hsync out of range) (II)
> MGA(0): Not using default mode "1280x1024" (hsync out of range) (II)
> MGA(0): Not using default mode "1280x1024" (hsync out of range) (II)
> MGA(0): Not using default mode "1600x1200" (hsync out of range) (II)
> MGA(0): Not using default mode "1600x1200" (hsync out of range) (II)
> MGA(0): Not using default mode "1600x1200" (hsync out of range) (II)
> MGA(0): Not using default mode "1600x1200" (hsync out of range) (II)
> MGA(0): Not using default mode "1600x1200" (hsync out of range) (II)
> MGA(0): Not using default mode "1792x1344" (hsync out of range) (II)
> MGA(0): Not using default mode "1792x1344" (hsync out of range) (II)
> MGA(0): Not using default mode "1856x1392" (hsync out of range) (II)
> MGA(0): Not using default mode "1856x1392" (hsync out of range) (II)
> MGA(0): Not using default mode "1920x1440" (hsync out of range) (II)
> MGA(0): Not using default mode "1920x1440" (hsync out of range) (II)
> MGA(0): Not using default mode "1400x1050" (hsync out of range) (--)
> MGA(0): Has SDRAM
> (--) MGA(0): Virtual size is 1280x1024 (pitch 1280)
> (**) MGA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (II)
> MGA(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025
> 1028 1066 +hsync +vsync (**) MGA(0): Default mode "1152x864": 108.0 MHz,
> 67.5 kHz, 75.0 Hz (II) MGA(0): Modeline "1152x864" 108.00 1152 1216
> 1344 1600 864 865 868 900 +hsync +vsync (**) MGA(0): Default mode
> "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
> (II) MGA(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
> 772 808 +hsync +vsync (**) MGA(0): Default mode "800x600": 56.3 MHz,
> 53.7 kHz, 85.1 Hz
> (II) MGA(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
> 631 +hsync +vsync (**) MGA(0): Mode "768x576": 50.0 MHz, 50.0 kHz, 79.4
> Hz
> (II) MGA(0): Modeline "768x576" 50.00 768 832 856 1000 576 590 595
> 630 -hsync -vsync (--) MGA(0): Display dimensions: (31, 23) cm
> (--) MGA(0): DPI set to (104, 113)
> (II) MGA(0): YDstOrg is set to 0
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 ANSI C Emulation, version 0.1
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.4
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.1.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.4
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 0 0 0xdf000000 - 0xdf7fffff (0x800000) MX[B]
> [1] 0 0 0xdfefc000 - 0xdfefffff (0x4000) MX[B]
> [2] 0 0 0xdc000000 - 0xddffffff (0x2000000) MX[B]
> [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [8] -1 0 0xdfffef80 - 0xdfffefff (0x80) MX[B]
> [9] -1 0 0xdedff000 - 0xdedfffff (0x1000) MX[B]
> [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
> [11] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
> [12] -1 0 0xdf000000 - 0xdf7fffff (0x800000) MX[B](B)
> [13] -1 0 0xdfefc000 - 0xdfefffff (0x4000) MX[B](B)
> [14] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B](B)
> [15] -1 0 0xdedfe000 - 0xdedfefff (0x1000) MX[B](B)
> [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [21] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
> [22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
> [25] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> [26] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]
> [27] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
> [28] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
> [29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (==) MGA(0): Write-combining range (0xdc000000,0x2000000)
> (--) MGA(0): 16 DWORD fifo
> (==) MGA(0): Default visual is TrueColor
> (II) MGA(0): [drm] bpp: 32 depth: 24
> (II) MGA(0): [drm] Sarea 2200+664: 2864
> (II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
> (II) MGA(0): [drm] added 4096 byte SAREA at 0xe0a94000
> (II) MGA(0): [drm] mapped SAREA 0xe0a94000 to 0x40018000
> (II) MGA(0): [drm] framebuffer handle = 0xdc000000
> (II) MGA(0): [drm] added 1 reserved context for kernel
> (II) MGA(0): [agp] Mode 0x1f000211 [AGP 0x1106/0x3099; Card
> 0x102b/0x0525] (II) MGA(0): [agp] 12288 kB allocated with handle
> 0xe2a97000
> (II) MGA(0): [agp] WARP microcode handle = 0xe0000000
> (II) MGA(0): [agp] WARP microcode mapped at 0x40019000
> (II) MGA(0): [agp] Primary DMA handle = 0xe0008000
> (II) MGA(0): [agp] Primary DMA mapped at 0x429a9000
> (II) MGA(0): [agp] DMA buffers handle = 0xe0108000
> (II) MGA(0): [agp] DMA buffers mapped at 0x42aa9000
> (II) MGA(0): [drm] Added 128 65536 byte DMA buffers
> (II) MGA(0): [drm] Registers handle = 0xdfefc000
> (II) MGA(0): [drm] Status handle = 0xe2aa0000
> (II) MGA(0): [agp] Status page mapped at 0x40021000
> (II) MGA(0): [dri] visual configs initialized
> (II) MGA(0): Memory manager initialized to (0,0) (1280,2047)
> (II) MGA(0): Largest offscreen area available: 1280 x 1023
> (II) MGA(0): Reserved back buffer at offset 0xa00000
> (II) MGA(0): Reserved depth buffer at offset 0xf00000
> (II) MGA(0): Reserved 12288 kb for textures at offset 0x1400000
> (II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> Solid filled trapezoids
> 8x8 mono pattern filled rectangles
> 8x8 mono pattern filled trapezoids
> Indirect CPU to Screen color expansion
> Screen to Screen color expansion
> Solid Lines
> Dashed Lines
> Scanline Image Writes
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 32 128x128 slots
> 9 256x256 slots
> (==) MGA(0): Backing store disabled
> (==) MGA(0): Silken mouse enabled
> (**) Option "dpms"
> (**) MGA(0): DPMS enabled
> (II) MGA(0): Using overlay video
> (II) MGA(0): X context handle = 0x00000001
> (II) MGA(0): [drm] installed DRM signal handler
> (II) MGA(0): [DRI] installation complete
> (II) MGA(0): [drm] Mapped 128 DMA buffers
> (==) MGA(0): Direct rendering enabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Keyboard "Generic Keyboard" handled by legacy driver
> (**) Option "Protocol" "ImPS/2"
> (**) Configured Mouse: Protocol: "ImPS/2"
> (**) Option "CorePointer"
> (**) Configured Mouse: Core Pointer
> (**) Option "Device" "/dev/misc/psaux"
> (==) Configured Mouse: Buttons: 3
> (**) Option "ZAxisMapping" "4 5"
> (**) Configured Mouse: ZAxisMapping: buttons 4 and 5
> (**) Option "Resolution" "800"
> (**) Configured Mouse: Resolution: 800
> (**) Option "Protocol" "ImPS/2"
> (**) Generic Mouse: Protocol: "ImPS/2"
> (**) Option "SendCoreEvents" "true"
> (**) Generic Mouse: always reports core events
> (**) Option "Device" "/dev/input/mice"
> (==) Generic Mouse: Buttons: 3
> (**) Option "ZAxisMapping" "4 5"
> (**) Generic Mouse: ZAxisMapping: buttons 4 and 5
> (II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
> (II) XINPUT: Adding extended input device "Configured Mouse" (type:
> MOUSE) Could not init font path element unix/:7100, removing from list!
> (II) Open APM successful
> SetKbdSettings - type: 2 rate: 30 delay: 500 snumlk: 0
> SetKbdSettings - Succeeded
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Unreported Prefix0 scancode: 0x24
> (II) Unreported Prefix0 scancode: 0x24
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Unreported Prefix0 scancode: 0x22
> (II) Unreported Prefix0 scancode: 0x22
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) MGA(0): [drm] removed 1 reserved context for kernel
> (II) MGA(0): [drm] unmapping 4096 bytes of SAREA 0xe0a94000 at
> 0x40018000 (II) Open APM successful
> (==) MGA(0): Write-combining range (0xdc000000,0x2000000)
> (==) MGA(0): Default visual is TrueColor
> (II) MGA(0): [drm] bpp: 32 depth: 24
> (II) MGA(0): [drm] Sarea 2200+664: 2864
> (II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
> (II) MGA(0): [drm] added 4096 byte SAREA at 0xe0a94000
> (II) MGA(0): [drm] mapped SAREA 0xe0a94000 to 0x40018000
> (II) MGA(0): [drm] framebuffer handle = 0xdc000000
> (II) MGA(0): [drm] added 1 reserved context for kernel
> (II) MGA(0): [agp] Mode 0x1f000211 [AGP 0x1106/0x3099; Card
> 0x102b/0x0525] (II) MGA(0): [agp] 12288 kB allocated with handle
> 0xe2a97000
> (II) MGA(0): [agp] WARP microcode handle = 0xe0000000
> (II) MGA(0): [agp] WARP microcode mapped at 0x40019000
> (II) MGA(0): [agp] Primary DMA handle = 0xe0008000
> (II) MGA(0): [agp] Primary DMA mapped at 0x429a9000
> (II) MGA(0): [agp] DMA buffers handle = 0xe0108000
> (II) MGA(0): [agp] DMA buffers mapped at 0x42aa9000
> (II) MGA(0): [drm] Added 128 65536 byte DMA buffers
> (II) MGA(0): [drm] Registers handle = 0xdfefc000
> (II) MGA(0): [drm] Status handle = 0xe2aa0000
> (II) MGA(0): [agp] Status page mapped at 0x40021000
> (II) MGA(0): [dri] visual configs initialized
> (II) MGA(0): Memory manager initialized to (0,0) (1280,2047)
> (II) MGA(0): Largest offscreen area available: 1280 x 1023
> (II) MGA(0): Reserved back buffer at offset 0xa00000
> (II) MGA(0): Reserved depth buffer at offset 0xf00000
> (II) MGA(0): Reserved 12288 kb for textures at offset 0x1400000
> (**) MGA(0): DPMS enabled
> (II) MGA(0): Using overlay video
> (II) MGA(0): X context handle = 0x00000001
> (II) MGA(0): [drm] installed DRM signal handler
> (II) MGA(0): [DRI] installation complete
> (II) MGA(0): [drm] Mapped 128 DMA buffers
> (==) MGA(0): Direct rendering enabled
> Could not init font path element unix/:7100, removing from list!
> AUDIT: Mon Aug 19 03:23:01 2002: 947 X: client 4 rejected from local
> host SetKbdSettings - type: 2 rate: 30 delay: 500 snumlk: 0
> SetKbdSettings - Succeeded
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> (II) Unreported Prefix0 scancode: 0x12
> (II) Unreported Prefix0 scancode: 0x12
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> (II) Open APM successful
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> GetModeLine - scrn: 0 clock: 108000
> GetModeLine - hdsp: 1280 hbeg: 1328 hend: 1440 httl: 1688
> vdsp: 1024 vbeg: 1025 vend: 1028 vttl: 1066 flags: 5
> (II) Open APM successful



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.101 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site