Messages in this thread | | | From | "H.Rosmanith (Kernel Mailing List)" <> | Subject | Re: need contact of via-rhine developers | Date | Tue, 20 Aug 2002 15:44:24 +0200 (MET DST) |
| |
> this driver seems to work for the vt6103 in patch-2.4.20-pre2-ac3.
okay, it seems that some code that restarts a hung chip has been added.
> with 2.4.18 it would die after about 2mb of data transferred and not > recover.
aha? I see stalls occuring frequently too, but earlier than 2mb. the card is then resetted by "NETDEV WATCHDOG", which appears in dmesg, and you'll also see a "transmit timeout eth0" (or something similar). so, if the patch is for a chip that does not recover, I guess it will not address this problem then (because the netdev-watchdog restarts the chip which *does* recover then).
my concern is that both vt6102 and vt6103 have been assigned the same pci-device-id by via. I dont think that the via-rhine driver does differ the two chips and treats the 6103 as a 6102.
also, on ftp.via.com.tw/...NIC/VT6103, there are no chip-specs, as opposed to the 6102 and 6105-directory. I've just mailed to robert_kuo@via.com.tw, I hope they will put up the missing specs.
do you know of any other sources of specs beside ftp.via.com.tw?
regards, h.rosmanith
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |