lkml.org 
[lkml]   [2002]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.4.20-pre3 boot hang
From
Date
Hi Klaus!

* Klaus Dittrich writes:
>SMP, P-III, Intel-BX
>booting Linux 2.4.20-pre3 stops after

>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket

Same here.
Apart from that, the latest ac series oopses when I try to mount a CD
in a drive driven by ide-scsi emulation. And the IDE performance was
quite a bit worse than 2.4.18. Sorry for not being able to make more
concrete statements, just wanted to mention it.

regards
Markus

Athlon XP1800+, ECS K7VZA, single processor, APIC

Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.11.2
util-linux 2.11m
mount 2.11m
modutils 2.4.16
e2fsprogs 1.25
reiserfsprogs 3.x.0j
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR-
<PERR- Latency: 32 Region 0: Memory at d0000000 (32-bit,
non-prefetchable) [size=128M] Capabilities: [c0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- Latency: 64 Bus: primary=00, secondary=01,
subordinate=01, sec-latency=64 I/O behind bridge:
0000f000-00000fff Memory behind bridge: cde00000-cfefffff
Prefetchable memory behind bridge: bdc00000-cdcfffff BridgeCtl:
Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR- Latency: 0

00:02.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
(prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR- Latency: 64 (20000ns max), cache line size 08 Interrupt:
pin D routed to IRQ 5 Region 0: Memory at cfffc000 (32-bit,
non-prefetchable) [size=4K]

00:02.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
(prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR- Latency: 64 (20000ns max), cache line size 08 Interrupt:
pin A routed to IRQ 10 Region 0: Memory at cfffd000 (32-bit,
non-prefetchable) [size=4K]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE
Controller (A,B step) Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap-
66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- Latency: 128 Region 4: I/O ports at ff00
[size=16]

00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
10/100 Ethernet (rev 90)
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
<PERR- Latency: 64 (13000ns min, 2750ns max) Interrupt: pin A
routed to IRQ 12 Region 0: I/O ports at d400 [size=256] Region
1: Memory at cfffb000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at cffc0000 [disabled] [size=128K] Capabilities:
[40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable-
DSel=0 DScale=0 PME-

00:09.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly
NCR) 53c875 (rev 26)
Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown
device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz-
UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
>SERR- <PERR- Latency: 134 (4250ns min, 16000ns max), cache line
size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at
d800 [size=256] Region 1: Memory at cfffff00 (32-bit,
non-prefetchable) [size=256] Region 2: Memory at cfffe000
(32-bit, non-prefetchable) [size=4K] Expansion ROM at cffe0000
[disabled] [size=64K] Capabilities: [40] Power Management
version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable-
DSel=0 DScale=0 PME-

00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev07)
Subsystem: Creative Labs: Unknown device 8061 Control: I/O+ Mem-
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+
FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min,
5000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O
ports at d000 [size=32] Capabilities: [dc] Power Management
version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable-
DSel=0 DScale=0 PME-

00:0b.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem-
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+
FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 0:
I/O ports at dc00 [size=8] Capabilities: [dc] Power Management
version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable-
DSel=0 DScale=0 PME-

00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 (rev11)
Subsystem: Hauppauge computer works Inc. WinTV/GO Control: I/O-
Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency:
64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 5
Region 0: Memory at cddfe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data Capabilities: [4c] Power
Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable-
DSel=0 DScale=0 PME-

00:0d.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV/GO Control: I/O-
Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency:
64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 5
Region 0: Memory at cddff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data Capabilities: [4c] Power
Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable-
DSel=0 DScale=0 PME-

00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS) Control:
I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B-
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at cc00
[size=32]

01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX)
(rev b2) (prog-if 00 [VGA])
Subsystem: ABIT Computer Corp.: Unknown device 6109 Control:
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+
ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to
IRQ 11 Region 0: Memory at ce000000 (32-bit, non-prefetchable)
[size=16M] Region 1: Memory at c0000000 (32-bit, prefetchable)
[size=128M] Expansion ROM at cfef0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable-
DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.124 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site