lkml.org 
[lkml]   [2002]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: promise ultra 133 tx2 lets system standby during use...?
From
Date
On Thu, 2002-08-15 at 15:27, Alan Cox wrote:
> On Thu, 2002-08-15 at 13:27, Thomas Munck Steenholdt wrote:
> > OK, I'll try the apm=off first to see if that resolves my problem...
> > are there any examples/places to look if i decided to update the
> > APM monitor list from linux? Anywhere I could get an idea of how that
> > could be done?
> > I don't know the chipset atm.
>
> lspci will tell you the chipset identifiers. Generally the first few
> listed devices are the chipset itself (00:00.0 is the north bridge, then
> the other stuff follows).
>
lspci:--8<-------------
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
00:02.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:02.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:02.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:02.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 05)
00:10.0 Unknown mass storage controller: Promise Technology, Inc. 20269
(rev 02)
00:14.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX]
(rev a1)
01:01.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01)
-->8---------------

This is what I have - but anyway, the apm=off option seems to work for
the 2.4.19 kernel, so I guess i'll leave it at that for the time being.
I suspect that the option will work with the distribution kernel as
well.
If the task of poke'ing an additional IRQ into the APM monitor list is
simply just doing a pokeb or pokew at the right port somewhere, then I
just might have a look at it... I really don't know where to start
tough.

Anyway, thanks alot :-) at least now i'm pretty sure what's causing my
problems, and happy that i did NOT go out after another ATA133
controller, just to try that out - the result would likely have been the
same and a lot of money would have been wasted.

Thanks again

Thomas

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.048 / U:2.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site