Messages in this thread |  | | From | Holger.Woehle@arcor ... | Date | Thu, 15 Aug 2002 11:23:41 +0100 | Subject | Re: Re: sundance.o only two ports working |
| |
>matt@ecsc.co.uk wrote: >I experienced problems with the sundance on the dfe580tx a while back >too, and I made a patch for 2.4.18 a while back (it on my site (in the >sig)), donald becker then released v1.08 on his site a while back >(www.scyld.com) which fixed the problem (my patch now includes this). >Please apply this patch and try again, (or try db's original version). >Fyi, the dfe580tx doesn't support mii-diag afaik. The best error check >was to check the output of ifconfig and see whether the RX bytes >equalled the TX bytes (unless running lo, these shouldn't be the same, >and they were the first time I had a problem). >Hope this helps, >Matt
>On Wed, 2002-08-14 at 18:37, Holger.Woehle@arcor.net wrote: > Hello, > i have a strange problem with two of my machines: > They are identical P4 systems with Intel Chipset with two epro100 adapters > onboard and a d-link dfe-580TX quad ethernet card. > I am using Kernel 2.4.18 and sundance.o v1.07a 7/9/2002.
Hello, i used the new V1.09 driver but nothing changed. I have the suspicion that i run into a irq problem with the D-LINK being a PCI-PCI bridge. Can that be the reason ?
# cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 4). Prefetchable 32 bit memory at 0xe4000000 [0xe43fffff]. Bus 0, device 1, function 0: PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 4). Master Capable. Latency=64. Min Gnt=6. Bus 0, device 30, function 0: PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 5). Master Capable. No bursts. Min Gnt=14. Bus 0, device 31, function 0: ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 5). Bus 0, device 31, function 1: IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 5). I/O at 0xf000 [0xf00f]. Bus 0, device 31, function 2: USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) (rev 5). IRQ 5. I/O at 0xb000 [0xb01f]. Bus 0, device 31, function 3: SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 5). IRQ 3. I/O at 0x500 [0x50f]. Bus 0, device 31, function 4: USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B) (rev 5). IRQ 11. I/O at 0xb800 [0xb81f]. Bus 2, device 1, function 0: PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 3). Master Capable. Latency=32. Min Gnt=6. Bus 2, device 6, function 0: Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 8). IRQ 11. Master Capable. Latency=32. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xe3200000 [0xe3200fff]. I/O at 0xa000 [0xa03f]. Non-prefetchable 32 bit memory at 0xe3100000 [0xe31fffff]. Bus 2, device 7, function 0: Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (#2) (rev 8). IRQ 9. Master Capable. Latency=32. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xe3201000 [0xe3201fff]. I/O at 0xa400 [0xa43f]. Non-prefetchable 32 bit memory at 0xe3000000 [0xe30fffff]. Bus 2, device 8, function 0: VGA compatible controller: ATI Technologies Inc Rage XL (rev 39). IRQ 9. Master Capable. Latency=32. Min Gnt=8. Non-prefetchable 32 bit memory at 0xe2000000 [0xe2ffffff]. I/O at 0xa800 [0xa8ff]. Non-prefetchable 32 bit memory at 0xe3202000 [0xe3202fff]. Bus 3, device 4, function 0: Ethernet controller: D-Link System Inc Sundance Ethernet (rev 18). IRQ 3. Master Capable. Latency=32. Min Gnt=10.Max Lat=10. I/O at 0x9000 [0x907f]. Bus 3, device 5, function 0: Ethernet controller: D-Link System Inc Sundance Ethernet (#2) (rev 18). IRQ 7. Master Capable. Latency=32. Min Gnt=10.Max Lat=10. I/O at 0x9400 [0x947f]. Bus 3, device 6, function 0: Ethernet controller: D-Link System Inc Sundance Ethernet (#3) (rev 18). IRQ 5. Master Capable. Latency=32. Min Gnt=10.Max Lat=10. I/O at 0x9800 [0x987f]. Bus 3, device 7, function 0: Ethernet controller: D-Link System Inc Sundance Ethernet (#4) (rev 18). IRQ 10. Master Capable. Latency=32. Min Gnt=10.Max Lat=10. I/O at 0x9c00 [0x9c7f].
# pci-config pci-config.c:v2.02 1/8/2001 Donald Becker (becker@scyld.com) http://www.scyld.com/diag/index.html Device #1 at bus 0 device/function 0/0, 1a308086. Device #2 at bus 0 device/function 1/0, 1a318086. Device #3 at bus 0 device/function 30/0, 244e8086. Device #4 at bus 0 device/function 31/0, 24408086. Device #5 at bus 0 device/function 31/1, 244b8086. Device #6 at bus 0 device/function 31/2, 24428086. Device #7 at bus 0 device/function 31/3, 24438086. Device #8 at bus 0 device/function 31/4, 24448086.
with regards
Holger
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |