Messages in this thread | | | Date | Fri, 19 Jul 2002 10:41:07 +0200 (SAST) | From | Zwane Mwaikambo <> | Subject | Re: 2.5.26 : drivers/scsi/BusLogic.c |
| |
On Thu, 18 Jul 2002, Doug Ledford wrote:
> Attached you will find a patch that compiles cleanly, but is totally > untested. Testing would be appreciated. I suspect FlashPoint controllers > *might* have a problem, but MultiMaster (or whatever they are called) > should work properly. WARNING: This could eat a filesystem, it's totally > untested DMA mapping code and I have *no* BusLogic controllers to do any > sort of verifications with. The brave at heart are needed to let me know > if this thing works ;-)
Boots and is in multiuser right now =) I'll thrash it about right now and see if anything falls over. However i commented out scsi_mark_host_reset, but it doesn't seem to be defined anywhere.
Thanks, Zwane
scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0: Firmware Version: 5.07B, I/O Address: 0x1080, IRQ Channel: 11/Level scsi0: PCI Bus: 0, Device: 16, Address: 0xFD000000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi0 : BusLogic BT-958
-- function.linuxpower.ca
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |