Messages in this thread | | | Date | Thu, 11 Jul 2002 10:10:24 +0200 (CEST) | From | Henning Petersen <> | Subject | Fwd: unhandled interrupt: 0xff63fc7f crash with emu10k1/soundblaster live value card |
| |
Hi ==
As I am uncertain that this mail address for Alan Cox is real or not, I'll send this message to
linux-kernel@vger.kernel.org
- as well. I hope that this gets through to the right person anyway.
Regards, Henning Petersen
--- Henning Petersen <castrolmanden2@yahoo.com> skrev: > Dato: Mon, 8 Jul 2002 23:03:04 +0200 (CEST) > Fra: Henning Petersen <castrolmanden2@yahoo.com> > Emne: unhandled interrupt: 0xff63fc7f crash with emu10k1/soundblaster > live value card > Til: emu10k1-devel@opensource.creative.com > > Hi developers > ============= > > I have a weird crash happening when using sound and X at the same > time. > > 1.) I boot up my debian 2.4.18 kernel (see dmesg output) > 2.) kdm starts up X > 3.) I run : depmod -a, modprobe emu10k1 as root > 4.) When I have used the sound card with for example xine or > realplayer, I can't shift to one of the virtual consoles > (ctrl-alt-f1) > without getting a crash, reporting this: warning, unhandled interrupt > 0xff63fc7f > > I can't shutdown the machine either; it's like it hanging in a loop > reporting these 'unhandled interrupts' or so... > > As long as I don't try to close/reboot the machine, or go into a > non-X > state, it works. > > Now, I can disable the display manager and use 'startx' to come into > X. > This works, but if I run 'depmod -a; modprobe emu10k1' first, X > reports > > > '(WW) VGA: No matching Device section for instance (BusID PCI:0:12:0) > found > (WW) VGA: No matching Device section for instance (BusID PCI:1:0:0) > found' > > In fact my soundblaster live value card did this before with an > AMD-K6-3D 400MHz processor as well; it seems that the soundcard wants > some resource that is necessary to run the X-server?? > > I hope you can use this; keep up your good work! > > Regards, Henning Petersen > > > --------------------------- > STUFF HERE > --------------------------- > > > > > > > > > > > > > > > > > This is a pre-release version of XFree86, and is not supported in any > way. Bugs may be reported to XFree86@XFree86.Org and patches > submitted > to fixes@XFree86.Org. Before reporting bugs in pre-release versions, > please check the latest version in the XFree86 CVS repository > (http://www.XFree86.Org/cvs) > > XFree86 Version 4.1.0.1 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 21 December 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.4.13 i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jul 8 20:47:01 > 2002 > (==) Using config file: "/root/XF86Config" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) > unknown. > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "My Monitor" > (**) | |-->Device "2 the Max MAXColor S3 Trio64V+" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc105" > (**) XKB: layout: "dk" > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75 > dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts > /Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 0.1.0 > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 0.1.0 > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (!!) More than one primary device found > (--) PCI: (0:11:0) BrookTree unknown chipset (0x036e) rev 17, Mem @ > 0xef001000/1 > 2 > (--) PCI: (0:12:0) Creative Labs unknown chipset (0x0002) rev 8, I/O > @ > 0xd400/5 > (--) PCI: (1:0:0) NVidia GeForce3 (rev 1) rev 163, Mem @ > 0xec000000/24, > 0xe40000 > 00/26, 0xe8000000/19 > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.1.9 > (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o > (II) Module vga: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 4.0.0 > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic > (WW) VGA: No matching Device section for instance (BusID PCI:0:12:0) > found > (WW) VGA: No matching Device section for instance (BusID PCI:1:0:0) > found > (EE) No devices detected. > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to submit@bugs.debian.org. > > XIO: fatal IO error 104 (Connection reset by peer) on X server > ":0.0" > after 0 requests (0 known processed) with 0 events remaining. > > > > > > > Linux version 2.4.18 (root@Tyr2) (gcc version 2.95.4 (Debian > prerelease)) #1 SMP Sun Jun 16 00:15:13 CEST 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) > BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) > BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > On node 0 totalpages: 131056 > zone(0): 4096 pages. > zone(1): 126960 pages. > zone(2): 0 pages. > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > Kernel command line: BOOT_IMAGE=hpkerne2 ro root=305 hdc=ide-scsi > ide_setup: hdc=ide-scsi > Initializing CPU#0 > Detected 1544.691 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 3080.19 BogoMIPS > Memory: 512536k/524224k available (1806k kernel code, 11300k > reserved, > 545k data, 252k init, 0k highmem) > Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) > Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) > Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) > Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) > Page-cache hash table entries: 131072 (order: 7, 524288 bytes) > CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 > CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > mtrr: detected mtrr type: Intel > CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 > CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 > CPU0: AMD Athlon(tm) XP 1800+ stepping 02 > per-CPU timeslice cutoff: 731.51 usecs. > SMP motherboard not detected. > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 1544.6652 MHz. > ..... host bus clock speed is 268.6374 MHz. > cpu: 0, clocks: 2686374, slice: 1343187 > CPU0<T0:2686368,T1:1343168,D:13,S:1343187,C:2686374> > Waiting on wait_init_idle (map = 0x0) > All processors have done init_idle > PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Unknown bridge resource 0: assuming transparent > PCI: Using IRQ router default [1106/3099] at 00:00.0 > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > Journalled Block Device driver loaded > NTFS driver v1.1.22 [Flags: R/O] > udf: registering filesystem > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ > SERIAL_PCI enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > Real Time Clock Driver v1.10e > block: 128 slots per queue, batch=32 > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > VP_IDE: IDE controller on PCI bus 00 dev 89 > PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try > using pci=biosirq. > VP_IDE: chipset revision 6 > VP_IDE: not 100% native mode: will probe irqs later > VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik > <vojtech@suse.cz> > hda: WDC WD400BB-32CFC0, ATA DISK drive > hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive > hdd: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide0: probed IRQ 14 failed, using default. > ide1 at 0x170-0x177,0x376 on irq 15 > ide1: probed IRQ 15 failed, using default. > hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 > hdd: ATAPI 40X DVD-ROM drive, 256kB Cache > Uniform CD-ROM driver Revision: 3.12 > Partition check: > hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > > Loading I2O Core - (c) Copyright 1999 Red Hat Software > Linux I2O PCI support (c) 1999 Red Hat Software. > i2o: Checking for PCI I2O controllers... > I2O configuration manager v 0.04. > (C) Copyright 1999 Red Hat Software > I2O Block Storage OSM v0.9 > (c) Copyright 1999-2001 Red Hat Software. > i2o_block: Checking for Boot device... > i2o_block: Checking for I2O Block devices... > I2O LAN OSM (C) 1999 University of Helsinki. > 8139too Fast Ethernet driver 0.9.24 > eth0: RealTek RTL8139 Fast Ethernet at 0xe080d000, 00:50:fc:4b:fd:26, > IRQ 11 > eth0: Identified 8139 chip type 'RTL-8139C' > Universal TUN/TAP device driver 1.4 (C)1999-2001 Maxim Krasnyansky > Linux agpgart interface v0.99 (c) Jeff Hartmann > agpgart: Maximum main memory to use for agp memory: 439M > agpgart: Detected Via Apollo Pro KT266 chipset > agpgart: AGP aperture is 64M @ 0xe0000000 > SCSI subsystem driver Revision: 1.00 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.05 > Type: CD-ROM ANSI SCSI revision: 02 > Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > uhci.c: USB Universal Host Controller Interface driver v1.1 > uhci.c: USB UHCI at I/O 0xe000, IRQ 5 > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > uhci.c: USB UHCI at I/O 0xe400, IRQ 5 > usb.c: new USB bus registered, assigned bus number 2 > hub.c: USB hub found > hub.c: 2 ports detected > i2o_scsi.c: Version 0.0.1 > chain_pool: 0 bytes @ dfee7e80 > (512 byte buffers X 4 can_queue X 0 i2o controllers) > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 4096 buckets, 32Kbytes > TCP: Hash tables configured (established 32768 bind 32768) > IPv4 over IPv4 tunneling driver > GRE over IPv4 tunneling driver > ip_conntrack (4095 buckets, 32760 max) > ip_tables: (C) 2000-2002 Netfilter core team > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 252k freed > Adding Swap: 497972k swap-space (priority -1) > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal > nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2802 Tue Mar 5 > 06:26:45 PST 2002 > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > eth0: Setting half-duplex based on auto-negotiated partner ability > 0000. > spurious 8259A interrupt: IRQ7. > NVRM: AGPGART: VIA Apollo KT133 chipset > NVRM: AGPGART: aperture: 64M @ 0xe0000000 > NVRM: AGPGART: aperture mapped from 0xe0000000 to 0xe1988000 > NVRM: AGPGART: mode 4x > NVRM: AGPGART: allocated 16 pages > Creative EMU10K1 PCI Audio Driver, version 0.18, 23:08:05 Jul 8 2002 > PCI: Enabling device 00:0c.0 (0000 -> 0001) > emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xd400-0xd41f, IRQ > 11 > ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR A5) > > > > > > > > > > > > > ===== > o O Hennings tog \ | / > o O OO - (_) - > ___ =========== =========== / | \ > _U___|o| ... [ U U U U ] [ U U U U ] > L______| [___] [_________] [_________] > oo OOO oo oo oo oo oo oo > ================================================== > > _____________________________________________________ > Følg VM i fodbold på tæt hold fra Yahoo!s officielle VM-side > www.yahoo.dk/vm2002 >
_____________________________________________________ Få den nye Yahoo! Messenger på www.yahoo.dk/messenger Nu med webkamera, talechat, interaktive baggrunde og meget mere! - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |