lkml.org 
[lkml]   [2002]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: gettimeofday clock jump bug
ashieh@OCF.Berkeley.EDU wrote:
>
> Hi,
>
> time() occasionally returns a bogus value (>1 hour jump forward, and a few microseconds later jumps back to the right time) on my box (Thunderbird 750, Asus K7V (KX133) kernel 2.4.17). This behavior sets in after the box is up for some period of time. I don't think this is related to the 686a configuration reset bug.

I suspect that do_gettimeoffset() may be, on occasion,
returning a negative number. The normalizing code then
works with this (unsigned) value until it is < 1,000,000.
If it came back as -1, this would generate an error of about
1.19 hours. I suspect the best fix would be to test the
result from do_gettimeoffset() for something greater than
say 20ms and if so set it to 0.

-g
>
> I suspect that somehow the either do_gettimeoffset() or xtime.tv_usec in do_gettimeofday is returning a ridiculously large value. I would like to get to the bottom of this problem, but am not familiar with this part of the timing infrastructure. Has anyone seen this bug before? Would using a different locking mode (SMP vs none SMP, or wahtever) possibly help this problem? Is there a document online describing how this works in Linux?
>
> In the meantime, I want to hack up a patch to fix this on my box. I'm thinking I could give up a few seconds of clock precision in exchange for monotonic clock behavior, and so I want to comment out the adjustments to usec. What are the possible ramifications of this hack?
>
> Alan
>
> Original do_gettimeofday:
>
> void do_gettimeofday(struct timeval *tv)
> {
> unsigned long flags;
> unsigned long usec, sec;
>
> read_lock_irqsave(&xtime_lock, flags);
> usec = do_gettimeoffset();
> {
> unsigned long lost = jiffies - wall_jiffies;
> if (lost)
> usec += lost * (1000000 / HZ);
> }
> sec = xtime.tv_sec;
> usec += xtime.tv_usec;
> read_unlock_irqrestore(&xtime_lock, flags);
>
> while (usec >= 1000000) {
> usec -= 1000000;
> sec++;
> }
>
> tv->tv_sec = sec;
> tv->tv_usec = usec;
> }
>
> My proposed hack (for my system):
>
> void do_gettimeofday(struct timeval *tv)
> {
> unsigned long flags;
> unsigned long usec, sec;
>
> read_lock_irqsave(&xtime_lock, flags);
> usec = do_gettimeoffset();
> /* {
> unsigned long lost = jiffies - wall_jiffies;
> if (lost)
> usec += lost * (1000000 / HZ);
> } */
> sec = xtime.tv_sec;
> usec = xtime.tv_usec;
> read_unlock_irqrestore(&xtime_lock, flags);
>
> while (usec >= 1000000) {
> usec -= 1000000;
> sec++;
> }
>
> tv->tv_sec = sec;
> tv->tv_usec = usec;
> }
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

--
George Anzinger george@mvista.com
High-res-timers:
http://sourceforge.net/projects/high-res-timers/
Real time sched: http://sourceforge.net/projects/rtsched/
Preemption patch:
http://www.kernel.org/pub/linux/kernel/people/rml
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:22    [W:0.056 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site