Messages in this thread | | | Date | Mon, 3 Jun 2002 11:19:10 +0200 | From | Vojtech Pavlik <> | Subject | Re: FUD or FACTS ?? but a new FLAME! |
| |
On Mon, Jun 03, 2002 at 07:36:35AM +0200, Martin Dalecki wrote:
> I have been reading the stuff about the difference between ATA/100 and > ATA/133 talking about clock cycles, buffer sizes, transmission directions > and what not and were quite unable to understand what the point was until I > looked at the public Intel ICH4 spec (the one available to us mortals > without connections :-) > > ftp://download.intel.com/design/chipsets/manuals/29860002.pdf
Thanks for the pointer, I was unable to find it when I was assing ICH4 support - and most board-maker sites at that time advertised ATA-133.
> Intel do state that the ICH4/82801DB supports only ATA/100 not ATA/133. > Looking through some reviews on the net on the 845E/G they do say the same > thing.
Actually, it doesn't support ATA-100 correctly either. It has a 133MHz base clock, and for ATA-100 uses a 3 clock cycle. 133MHz/3*2byte = 88.6 MB/sec.
So the maximum documented speed on ICH chips is 88.6 write, and 100.0 read - because there the drive dictates the speed.
> In the light of that perhaps the code in drivers/ide/piix.c stating that the > ICH4 does ATA/133 is a bit optimistic and should be moved to the "try it if > you want to " CONFIG_BLK_DEV_PIIX_TRY133 option.
Agreed. Martin, please do that. Also, please change the Config.in comment to something like "Enable undocumented ATA-133 on ICH chips", or somehting alike..
> Of course Vojtek might have better info that says otherwise.
No, I don't. ICH4 was designed to have ATA-133 capability, Intel probably downgraded that in the spec because of some problems.
-- Vojtech Pavlik SuSE Labs - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |