lkml.org 
[lkml]   [2002]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] 2.5.24 IDE 94
Fri Jun 21 02:23:13 CEST 2002 ide-clean-94

- Synchronize with 2.5.24

- Integrate work on ATAPI unification by Bartłomiej:

generic ATAPI hit #1 against 2.5.22:

- move generic ATAPI structs from ide/ide-floppy.c
and ide/ide-tape.c to include/atapi.h
(this has a nice side effect of making ide-tape
a bit more endianness aware)

- remove IDEFLOPPY_MIN/MAX() macros, use generic ones


- Unify ioctl handling with generic ide_raw_taskfile().

- Extend the scope of IDE_DMA bit setting in udma_init() and udma_stop() to be
a more encompassing. This should solve the "DMA in progress" problems.
diff -urN linux-2.5.24/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.24/drivers/ide/ide.c 2002-06-21 00:53:57.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-06-24 20:41:39.000000000 +0200
@@ -563,7 +563,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.sector_count = drive->sect;
args.cmd = WIN_RESTORE;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
printk(KERN_INFO "%s: done!\n", drive->name);
}

@@ -834,86 +834,6 @@
return NULL;
}

-
-/*
- * Feed commands to a drive until it barfs. Called with queue lock held and
- * busy channel.
- */
-static void queue_commands(struct ata_device *drive)
-{
- struct ata_channel *ch = drive->channel;
- ide_startstop_t startstop = -1;
-
- for (;;) {
- struct request *rq = NULL;
-
- if (!test_bit(IDE_BUSY, ch->active))
- printk(KERN_ERR "%s: error: not busy while queueing!\n", drive->name);
-
- /* Abort early if we can't queue another command. for non
- * tcq, ata_can_queue is always 1 since we never get here
- * unless the drive is idle.
- */
- if (!ata_can_queue(drive)) {
- if (!ata_pending_commands(drive))
- clear_bit(IDE_BUSY, ch->active);
- break;
- }
-
- drive->sleep = 0;
-
- if (test_bit(IDE_DMA, ch->active)) {
- printk(KERN_ERR "%s: error: DMA in progress...\n", drive->name);
- break;
- }
-
- /* There's a small window between where the queue could be
- * replugged while we are in here when using tcq (in which
- * case the queue is probably empty anyways...), so check
- * and leave if appropriate. When not using tcq, this is
- * still a severe BUG!
- */
- if (blk_queue_plugged(&drive->queue)) {
- BUG_ON(!drive->using_tcq);
- break;
- }
-
- if (!(rq = elv_next_request(&drive->queue))) {
- if (!ata_pending_commands(drive))
- clear_bit(IDE_BUSY, ch->active);
- drive->rq = NULL;
- break;
- }
-
- /* If there are queued commands, we can't start a non-fs
- * request (really, a non-queuable command) until the
- * queue is empty.
- */
- if (!(rq->flags & REQ_CMD) && ata_pending_commands(drive))
- break;
-
- drive->rq = rq;
-
- ide__sti(); /* allow other IRQs while we start this request */
- startstop = start_request(drive, rq);
-
- /* command started, we are busy */
- if (startstop == ide_started)
- break;
-
- /* start_request() can return either ide_stopped (no command
- * was started), ide_started (command started, don't queue
- * more), or ide_released (command started, try and queue
- * more).
- */
-#if 0
- if (startstop == ide_stopped)
- set_bit(IDE_BUSY, &hwgroup->flags);
-#endif
-
- }
-}
-
/*
* Issue a new request.
* Caller must have already done spin_lock_irqsave(channel->lock, ...)
@@ -926,6 +846,8 @@
while (!test_and_set_bit(IDE_BUSY, channel->active)) {
struct ata_channel *ch;
struct ata_device *drive;
+ struct request *rq = NULL;
+ int i;

/* this will clear IDE_BUSY, if appropriate */
drive = choose_urgent_device(channel);
@@ -935,23 +857,92 @@

ch = drive->channel;

- /* Disable intrerrupts from the drive on the previous channel.
- *
- * FIXME: This should be only done if we are indeed sharing the same
- * interrupt line with it.
- *
- * FIXME: check this! It appears to act on the current channel!
+ /* Make sure that all drives on channels sharing the IRQ line
+ * with us won't generate IRQ's during our activity.
*/
- if (ch != channel && channel->sharing_irq && ch->irq == channel->irq)
- ata_irq_enable(drive, 0);
+ for (i = 0; i < MAX_HWIFS; ++i) {
+ struct ata_channel *tmp = &ide_hwifs[i];
+ int j;
+
+ if (!tmp->present)
+ continue;
+
+ if (ch == tmp || ch->irq != tmp->irq)
+ continue;
+
+ /* Only care if there is any drive on the channel in
+ * question.
+ */
+ for (j = 0; j < MAX_DRIVES; ++j) {
+ struct ata_device * drive = &tmp->drives[j];
+ if (drive->present)
+ ata_irq_enable(drive, 0);
+ }
+ }

/* Remember the last drive we where acting on.
*/
ch->drive = drive;

- queue_commands(drive);
- }
+ /*
+ * Feed commands to a drive until it barfs.
+ */
+
+ do {
+ if (!test_bit(IDE_BUSY, ch->active))
+ printk(KERN_ERR "%s: error: not busy while queueing!\n", drive->name);
+
+ /* Abort early if we can't queue another command. for
+ * non tcq, ata_can_queue is always 1 since we never
+ * get here unless the drive is idle.
+ */
+ if (!ata_can_queue(drive)) {
+ if (!ata_pending_commands(drive))
+ clear_bit(IDE_BUSY, ch->active);
+ break;
+ }
+
+ drive->sleep = 0;
+
+ if (test_bit(IDE_DMA, ch->active)) {
+ printk(KERN_ERR "%s: error: DMA in progress...\n", drive->name);
+ break;
+ }
+
+ /* There's a small window between where the queue could
+ * be replugged while we are in here when using tcq (in
+ * which case the queue is probably empty anyways...),
+ * so check and leave if appropriate. When not using
+ * tcq, this is still a severe BUG!
+ */
+ if (blk_queue_plugged(&drive->queue)) {
+ BUG_ON(!drive->using_tcq);
+ break;
+ }

+ if (!(rq = elv_next_request(&drive->queue))) {
+ if (!ata_pending_commands(drive))
+ clear_bit(IDE_BUSY, ch->active);
+ drive->rq = NULL;
+ break;
+ }
+
+ /* If there are queued commands, we can't start a
+ * non-fs request (really, a non-queuable command)
+ * until the queue is empty.
+ */
+ if (!(rq->flags & REQ_CMD) && ata_pending_commands(drive))
+ break;
+
+ drive->rq = rq;
+
+ ide__sti(); /* allow other IRQs while we start this request */
+ /* command started, we are busy */
+ } while (ide_started != start_request(drive, rq));
+ /* make sure the BUSY bit is set */
+ /* FIXME: perhaps there is some place where we miss to set it? */
+ set_bit(IDE_BUSY, ch->active);
+ }
}

void do_ide_request(request_queue_t *q)
@@ -1234,8 +1225,7 @@
} else {
printk("%s: %s: huh? expected NULL handler on exit\n", drive->name, __FUNCTION__);
}
- } else if (startstop == ide_released)
- queue_commands(drive);
+ }

out_lock:
spin_unlock_irqrestore(ch->lock, flags);
diff -urN linux-2.5.24/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.24/drivers/ide/ide-disk.c 2002-06-21 00:53:41.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-06-24 23:09:32.000000000 +0200
@@ -11,8 +11,6 @@
* This is the ATA disk device driver, as evolved from hd.c and ide.c.
*/

-#define IDEDISK_VERSION "1.14"
-
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
@@ -41,6 +39,24 @@
#endif

/*
+ * for now, taskfile requests are special :/
+ */
+static inline char *ide_map_rq(struct request *rq, unsigned long *flags)
+{
+ if (rq->bio)
+ return bio_kmap_irq(rq->bio, flags) + ide_rq_offset(rq);
+ else
+ return rq->buffer + ((rq)->nr_sectors - (rq)->current_nr_sectors) * SECTOR_SIZE;
+}
+
+static inline void ide_unmap_rq(struct request *rq, char *to,
+ unsigned long *flags)
+{
+ if (rq->bio)
+ bio_kunmap_irq(to, flags);
+}
+
+/*
* Perform a sanity check on the claimed "lba_capacity"
* value for this drive (from its reported identification information).
*
@@ -113,7 +129,6 @@

ret = ide_started;
} else {
-
// printk("Read: %p, rq->current_nr_sectors: %d\n", buf, (int) rq->current_nr_sectors);
{
unsigned long flags;
@@ -347,18 +362,207 @@
}

/*
- * Channel lock should be held on entry.
+ * Issue a READ or WRITE command to a disk, using LBA if supported, or CHS
+ * otherwise, to address sectors. It also takes care of issuing special
+ * DRIVE_CMDs.
+ *
+ * Channel lock should be held.
*/
-static ide_startstop_t __do_request(struct ata_device *drive,
- struct ata_taskfile *ar, struct request *rq)
+static ide_startstop_t idedisk_do_request(struct ata_device *drive, struct request *rq, sector_t block)
{
+ struct ata_taskfile args;
+ struct ata_taskfile *ar;
struct hd_driveid *id = drive->id;
+ u8 cmd;
+
+ /* Special drive commands don't need any kind of setup.
+ */
+ if (rq->flags & REQ_SPECIAL) {
+ ar = rq->special;
+ cmd = ar->cmd;
+ } else {
+ unsigned int sectors;
+
+ /* FIXME: this check doesn't make sense */
+ if (!(rq->flags & REQ_CMD)) {
+ blk_dump_rq_flags(rq, "idedisk_do_request - bad command");
+ __ata_end_request(drive, rq, 0, 0);
+
+ return ide_stopped;
+ }
+
+ if (IS_PDC4030_DRIVE) {
+ extern ide_startstop_t promise_do_request(struct ata_device *, struct request *, sector_t);
+
+ return promise_do_request(drive, rq, block);
+ }
+
+ /*
+ * start a tagged operation
+ */
+ if (drive->using_tcq) {
+ int st = blk_queue_start_tag(&drive->queue, rq);
+
+ if (ata_pending_commands(drive) > drive->max_depth)
+ drive->max_depth = ata_pending_commands(drive);
+ if (ata_pending_commands(drive) > drive->max_last_depth)
+ drive->max_last_depth = ata_pending_commands(drive);
+
+ if (st) {
+ BUG_ON(!ata_pending_commands(drive));
+
+ return ide_started;
+ }
+ }
+ ar = &args;
+
+ memset(&args, 0, sizeof(args));
+ sectors = rq->nr_sectors;
+ /* Dispatch depending up on the drive access method. */
+ if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing)) {
+ /* LBA 48 bit */
+ /*
+ * 268435455 == 137439 MB or 28bit limit
+ * 320173056 == 163929 MB or 48bit addressing
+ * 1073741822 == 549756 MB or 48bit addressing fake drive
+ */
+ if (sectors == 65536)
+ sectors = 0;
+
+ if (blk_rq_tagged(rq)) {
+ args.taskfile.feature = sectors;
+ args.hobfile.feature = sectors >> 8;
+ args.taskfile.sector_count = rq->tag << 3;
+ } else {
+ args.taskfile.sector_count = sectors;
+ args.hobfile.sector_count = sectors >> 8;
+ }
+
+ args.taskfile.sector_number = block; /* low lba */
+ args.taskfile.low_cylinder = (block >>= 8); /* mid lba */
+ args.taskfile.high_cylinder = (block >>= 8); /* hi lba */
+ args.taskfile.device_head = drive->select.all;
+
+ args.hobfile.sector_number = (block >>= 8); /* low lba */
+ args.hobfile.low_cylinder = (block >>= 8); /* mid lba */
+ args.hobfile.high_cylinder = (block >>= 8); /* hi lba */
+ } else if (drive->select.b.lba) {
+ /* LBA 28 bit */
+ if (sectors == 256)
+ sectors = 0;
+
+ if (blk_rq_tagged(rq)) {
+ args.taskfile.feature = sectors;
+ args.taskfile.sector_count = rq->tag << 3;
+ } else
+ args.taskfile.sector_count = sectors;
+
+ args.taskfile.sector_number = block;
+ args.taskfile.low_cylinder = (block >>= 8);
+ args.taskfile.high_cylinder = (block >>= 8);
+ args.taskfile.device_head = ((block >> 8) & 0x0f);
+ } else {
+ /* CHS */
+ unsigned int track = (block / drive->sect);
+ unsigned int sect = (block % drive->sect) + 1;
+ unsigned int head = (track % drive->head);
+ unsigned int cyl = (track / drive->head);
+
+ if (sectors == 256)
+ sectors = 0;
+
+ if (blk_rq_tagged(rq)) {
+ args.taskfile.feature = sectors;
+ args.taskfile.sector_count = rq->tag << 3;
+ } else
+ args.taskfile.sector_count = sectors;
+
+ args.taskfile.sector_number = sect;
+ args.taskfile.low_cylinder = cyl;
+ args.taskfile.high_cylinder = (cyl>>8);
+ args.taskfile.device_head = head;
+ }
+ args.taskfile.device_head |= drive->select.all;
+
+ /*
+ * Decode with physical ATA command to use and setup associated data.
+ */
+
+ if (rq_data_dir(rq) == READ) {
+ args.command_type = IDE_DRIVE_TASK_IN;
+ if (drive->addressing) {
+ if (drive->using_tcq) {
+ cmd = WIN_READDMA_QUEUED_EXT;
+ } else if (drive->using_dma) {
+ cmd = WIN_READDMA_EXT;
+ } else if (drive->mult_count) {
+ args.XXX_handler = task_mulin_intr;
+ cmd = WIN_MULTREAD_EXT;
+ } else {
+ args.XXX_handler = task_in_intr;
+ cmd = WIN_READ_EXT;
+ }
+ } else {
+ if (drive->using_tcq) {
+ cmd = WIN_READDMA_QUEUED;
+ } else if (drive->using_dma) {
+ cmd = WIN_READDMA;
+ } else if (drive->mult_count) {
+ /* FIXME : Shouldn't this be task_mulin_intr?! */
+ args.XXX_handler = task_in_intr;
+ cmd = WIN_MULTREAD;
+ } else {
+ args.XXX_handler = task_in_intr;
+ cmd = WIN_READ;
+ }
+ }
+ } else {
+ args.command_type = IDE_DRIVE_TASK_RAW_WRITE;
+ if (drive->addressing) {
+ if (drive->using_tcq) {
+ cmd = WIN_WRITEDMA_QUEUED_EXT;
+ } else if (drive->using_dma) {
+ cmd = WIN_WRITEDMA_EXT;
+ } else if (drive->mult_count) {
+ args.XXX_handler = task_mulout_intr;
+ cmd = WIN_MULTWRITE_EXT;
+ } else {
+ args.XXX_handler = task_out_intr;
+ cmd = WIN_WRITE_EXT;
+ }
+ } else {
+ if (drive->using_tcq) {
+ cmd = WIN_WRITEDMA_QUEUED;
+ } else if (drive->using_dma) {
+ cmd = WIN_WRITEDMA;
+ } else if (drive->mult_count) {
+ args.XXX_handler = task_mulout_intr;
+ cmd = WIN_MULTWRITE;
+ } else {
+ args.XXX_handler = task_out_intr;
+ cmd = WIN_WRITE;
+ }
+ }
+ }
+#ifdef DEBUG
+ printk("%s: %sing: ", drive->name,
+ (rq_data_dir(rq)==READ) ? "read" : "writ");
+ if (lba) printk("LBAsect=%lld, ", block);
+ else printk("CHS=%d/%d/%d, ", cyl, head, sect);
+ printk("sectors=%ld, ", rq->nr_sectors);
+ printk("buffer=%p\n", rq->buffer);
+#endif
+ }
+
+ /*
+ * Channel lock should be held on entry.
+ */

/* (ks/hs): Moved to start, do not use for multiple out commands.
* FIXME: why not?! */
- if (!(ar->cmd == CFA_WRITE_MULTI_WO_ERASE ||
- ar->cmd == WIN_MULTWRITE ||
- ar->cmd == WIN_MULTWRITE_EXT)) {
+ if (!(cmd == CFA_WRITE_MULTI_WO_ERASE ||
+ cmd == WIN_MULTWRITE ||
+ cmd == WIN_MULTWRITE_EXT)) {
ata_irq_enable(drive, 1);
ata_mask(drive);
}
@@ -372,11 +576,13 @@
OUT_BYTE((ar->taskfile.device_head & (drive->addressing ? 0xE0 : 0xEF)) | drive->select.all,
IDE_SELECT_REG);

+ /* FIXME: this is actually distingushing between PIO and DMA requests.
+ */
if (ar->XXX_handler) {
struct ata_channel *ch = drive->channel;

ata_set_handler(drive, ar->XXX_handler, WAIT_CMD, NULL);
- OUT_BYTE(ar->cmd, IDE_COMMAND_REG);
+ OUT_BYTE(cmd, IDE_COMMAND_REG);

/* FIXME: Warning check for race between handler and prehandler
* for writing first block of data. however since we are well
@@ -385,15 +591,15 @@
* FIXME: Replace the switch by using a proper command_type.
*/

- if (ar->cmd == CFA_WRITE_SECT_WO_ERASE ||
- ar->cmd == WIN_WRITE ||
- ar->cmd == WIN_WRITE_EXT ||
- ar->cmd == WIN_WRITE_VERIFY ||
- ar->cmd == WIN_WRITE_BUFFER ||
- ar->cmd == WIN_DOWNLOAD_MICROCODE ||
- ar->cmd == CFA_WRITE_MULTI_WO_ERASE ||
- ar->cmd == WIN_MULTWRITE ||
- ar->cmd == WIN_MULTWRITE_EXT) {
+ if (cmd == CFA_WRITE_SECT_WO_ERASE ||
+ cmd == WIN_WRITE ||
+ cmd == WIN_WRITE_EXT ||
+ cmd == WIN_WRITE_VERIFY ||
+ cmd == WIN_WRITE_BUFFER ||
+ cmd == WIN_DOWNLOAD_MICROCODE ||
+ cmd == CFA_WRITE_MULTI_WO_ERASE ||
+ cmd == WIN_MULTWRITE ||
+ cmd == WIN_MULTWRITE_EXT) {
ide_startstop_t startstop;

if (ata_status_poll(drive, DATA_READY, drive->bad_wstat,
@@ -407,9 +613,9 @@
/* FIXME: This doesn't make the slightest sense.
* (ks/hs): Fixed Multi Write
*/
- if (!(ar->cmd == CFA_WRITE_MULTI_WO_ERASE ||
- ar->cmd == WIN_MULTWRITE ||
- ar->cmd == WIN_MULTWRITE_EXT)) {
+ if (!(cmd == CFA_WRITE_MULTI_WO_ERASE ||
+ cmd == WIN_MULTWRITE ||
+ cmd == WIN_MULTWRITE_EXT)) {
unsigned long flags;
char *buf = ide_map_rq(rq, &flags);

@@ -438,6 +644,9 @@
break;
}
if (!drive_is_ready(drive)) {
+ /* We are compleatly missing an error
+ * return path here.
+ */
printk(KERN_ERR "DISASTER WAITING TO HAPPEN!\n");
}
/* FIXME: make this unlocking go away*/
@@ -460,20 +669,22 @@
return ide_started;

/* for dma commands we don't set the handler */
- if (ar->cmd == WIN_WRITEDMA ||
- ar->cmd == WIN_WRITEDMA_EXT ||
- ar->cmd == WIN_READDMA ||
- ar->cmd == WIN_READDMA_EXT)
+ if (cmd == WIN_WRITEDMA ||
+ cmd == WIN_WRITEDMA_EXT ||
+ cmd == WIN_READDMA ||
+ cmd == WIN_READDMA_EXT)
return udma_init(drive, rq);
#ifdef CONFIG_BLK_DEV_IDE_TCQ
- else if (ar->cmd == WIN_WRITEDMA_QUEUED ||
- ar->cmd == WIN_WRITEDMA_QUEUED_EXT ||
- ar->cmd == WIN_READDMA_QUEUED ||
- ar->cmd == WIN_READDMA_QUEUED_EXT)
+ else if (cmd == WIN_WRITEDMA_QUEUED ||
+ cmd == WIN_WRITEDMA_QUEUED_EXT ||
+ cmd == WIN_READDMA_QUEUED ||
+ cmd == WIN_READDMA_QUEUED_EXT)
return udma_tcq_init(drive, rq);
#endif
else {
- printk(KERN_ERR "%s: unknown command %x\n", __FUNCTION__, ar->cmd);
+ printk(KERN_ERR "%s: unknown command %x\n",
+ __FUNCTION__, cmd);
+
return ide_stopped;
}
}
@@ -481,198 +692,6 @@
return ide_started;
}

-/*
- * Issue a READ or WRITE command to a disk, using LBA if supported, or CHS
- * otherwise, to address sectors. It also takes care of issuing special
- * DRIVE_CMDs.
- *
- * Channel lock should be held.
- */
-static ide_startstop_t idedisk_do_request(struct ata_device *drive, struct request *rq, sector_t block)
-{
- struct ata_taskfile args;
- unsigned int sectors;
-
- /* This issues a special drive command.
- */
- if (rq->flags & REQ_SPECIAL)
- return __do_request(drive, rq->special, rq);
-
- /* FIXME: this check doesn't make sense */
- if (!(rq->flags & REQ_CMD)) {
- blk_dump_rq_flags(rq, "idedisk_do_request - bad command");
- __ata_end_request(drive, rq, 0, 0);
-
- return ide_stopped;
- }
-
- if (IS_PDC4030_DRIVE) {
- extern ide_startstop_t promise_do_request(struct ata_device *, struct request *, sector_t);
-
- return promise_do_request(drive, rq, block);
- }
-
- /*
- * start a tagged operation
- */
- if (drive->using_tcq) {
- int st = blk_queue_start_tag(&drive->queue, rq);
-
- if (ata_pending_commands(drive) > drive->max_depth)
- drive->max_depth = ata_pending_commands(drive);
- if (ata_pending_commands(drive) > drive->max_last_depth)
- drive->max_last_depth = ata_pending_commands(drive);
-
- if (st) {
- BUG_ON(!ata_pending_commands(drive));
-
- return ide_started;
- }
- }
-
- memset(&args, 0, sizeof(args));
- sectors = rq->nr_sectors;
- /* Dispatch depending up on the drive access method. */
- if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing)) {
- /* LBA 48 bit */
- /*
- * 268435455 == 137439 MB or 28bit limit
- * 320173056 == 163929 MB or 48bit addressing
- * 1073741822 == 549756 MB or 48bit addressing fake drive
- */
- if (sectors == 65536)
- sectors = 0;
-
- if (blk_rq_tagged(rq)) {
- args.taskfile.feature = sectors;
- args.hobfile.feature = sectors >> 8;
- args.taskfile.sector_count = rq->tag << 3;
- } else {
- args.taskfile.sector_count = sectors;
- args.hobfile.sector_count = sectors >> 8;
- }
-
- args.taskfile.sector_number = block; /* low lba */
- args.taskfile.low_cylinder = (block >>= 8); /* mid lba */
- args.taskfile.high_cylinder = (block >>= 8); /* hi lba */
- args.taskfile.device_head = drive->select.all;
-
- args.hobfile.sector_number = (block >>= 8); /* low lba */
- args.hobfile.low_cylinder = (block >>= 8); /* mid lba */
- args.hobfile.high_cylinder = (block >>= 8); /* hi lba */
- } else if (drive->select.b.lba) {
- /* LBA 28 bit */
- if (sectors == 256)
- sectors = 0;
-
- if (blk_rq_tagged(rq)) {
- args.taskfile.feature = sectors;
- args.taskfile.sector_count = rq->tag << 3;
- } else
- args.taskfile.sector_count = sectors;
-
- args.taskfile.sector_number = block;
- args.taskfile.low_cylinder = (block >>= 8);
- args.taskfile.high_cylinder = (block >>= 8);
- args.taskfile.device_head = ((block >> 8) & 0x0f);
- } else {
- /* CHS */
- unsigned int track = (block / drive->sect);
- unsigned int sect = (block % drive->sect) + 1;
- unsigned int head = (track % drive->head);
- unsigned int cyl = (track / drive->head);
-
- if (sectors == 256)
- sectors = 0;
-
- if (blk_rq_tagged(rq)) {
- args.taskfile.feature = sectors;
- args.taskfile.sector_count = rq->tag << 3;
- } else
- args.taskfile.sector_count = sectors;
-
- args.taskfile.sector_number = sect;
- args.taskfile.low_cylinder = cyl;
- args.taskfile.high_cylinder = (cyl>>8);
- args.taskfile.device_head = head;
- }
- args.taskfile.device_head |= drive->select.all;
-
- /*
- * Decode with physical ATA command to use and setup associated data.
- */
-
- if (rq_data_dir(rq) == READ) {
- args.command_type = IDE_DRIVE_TASK_IN;
- if (drive->addressing) {
- if (drive->using_tcq) {
- args.cmd = WIN_READDMA_QUEUED_EXT;
- } else if (drive->using_dma) {
- args.cmd = WIN_READDMA_EXT;
- } else if (drive->mult_count) {
- args.XXX_handler = task_mulin_intr;
- args.cmd = WIN_MULTREAD_EXT;
- } else {
- args.XXX_handler = task_in_intr;
- args.cmd = WIN_READ_EXT;
- }
- } else {
- if (drive->using_tcq) {
- args.cmd = WIN_READDMA_QUEUED;
- } else if (drive->using_dma) {
- args.cmd = WIN_READDMA;
- } else if (drive->mult_count) {
- /* FIXME : Shouldn't this be task_mulin_intr?! */
- args.XXX_handler = task_in_intr;
- args.cmd = WIN_MULTREAD;
- } else {
- args.XXX_handler = task_in_intr;
- args.cmd = WIN_READ;
- }
- }
- } else {
- args.command_type = IDE_DRIVE_TASK_RAW_WRITE;
- if (drive->addressing) {
- if (drive->using_tcq) {
- args.cmd = WIN_WRITEDMA_QUEUED_EXT;
- } else if (drive->using_dma) {
- args.cmd = WIN_WRITEDMA_EXT;
- } else if (drive->mult_count) {
- args.XXX_handler = task_mulout_intr;
- args.cmd = WIN_MULTWRITE_EXT;
- } else {
- args.XXX_handler = task_out_intr;
- args.cmd = WIN_WRITE_EXT;
- }
- } else {
- if (drive->using_tcq) {
- args.cmd = WIN_WRITEDMA_QUEUED;
- } else if (drive->using_dma) {
- args.cmd = WIN_WRITEDMA;
- } else if (drive->mult_count) {
- args.XXX_handler = task_mulout_intr;
- args.cmd = WIN_MULTWRITE;
- } else {
- args.XXX_handler = task_out_intr;
- args.cmd = WIN_WRITE;
- }
- }
- }
-
-
-#ifdef DEBUG
- printk("%s: %sing: ", drive->name,
- (rq_data_dir(rq)==READ) ? "read" : "writ");
- if (lba) printk("LBAsect=%lld, ", block);
- else printk("CHS=%d/%d/%d, ", cyl, head, sect);
- printk("sectors=%ld, ", rq->nr_sectors);
- printk("buffer=%p\n", rq->buffer);
-#endif
- rq->special = &args;
-
- return __do_request(drive, &args, rq);
-}
-
static int idedisk_open(struct inode *inode, struct file *__fp, struct ata_device *drive)
{
MOD_INC_USE_COUNT;
@@ -689,7 +708,7 @@

memset(&args, 0, sizeof(args));
args.cmd = WIN_DOORLOCK;
- if (ide_raw_taskfile(drive, &args))
+ if (ide_raw_taskfile(drive, &args, NULL))
drive->doorlocking = 0;
}
}
@@ -708,7 +727,7 @@
else
args.cmd = WIN_FLUSH_CACHE;

- return ide_raw_taskfile(drive, &args);
+ return ide_raw_taskfile(drive, &args, NULL);
}

static void idedisk_release(struct inode *inode, struct file *filp, struct ata_device *drive)
@@ -722,7 +741,7 @@

memset(&args, 0, sizeof(args));
args.cmd = WIN_DOORUNLOCK;
- if (ide_raw_taskfile(drive, &args))
+ if (ide_raw_taskfile(drive, &args, NULL))
drive->doorlocking = 0;
}
}
@@ -769,7 +788,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.sector_count = arg;
args.cmd = WIN_SETMULT;
- if (!ide_raw_taskfile(drive, &args)) {
+ if (!ide_raw_taskfile(drive, &args, NULL)) {
/* all went well track this setting as valid */
drive->mult_count = arg;

@@ -798,7 +817,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = (arg) ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
args.cmd = WIN_SETFEATURES;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);

drive->wcache = arg;

@@ -811,7 +830,7 @@

memset(&args, 0, sizeof(args));
args.cmd = WIN_STANDBYNOW1;
- return ide_raw_taskfile(drive, &args);
+ return ide_raw_taskfile(drive, &args, NULL);
}

static int set_acoustic(struct ata_device *drive, int arg)
@@ -822,7 +841,7 @@
args.taskfile.feature = (arg)?SETFEATURES_EN_AAM:SETFEATURES_DIS_AAM;
args.taskfile.sector_count = arg;
args.cmd = WIN_SETFEATURES;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);

drive->acoustic = arg;

@@ -942,7 +961,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.device_head = 0x40;
args.cmd = WIN_READ_NATIVE_MAX;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);

/* if OK, compute maximum address value */
if (!(drive->status & ERR_STAT)) {
@@ -964,10 +983,9 @@

/* Create IDE/ATA command request structure */
memset(&args, 0, sizeof(args));
-
args.taskfile.device_head = 0x40;
args.cmd = WIN_READ_NATIVE_MAX_EXT;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);

/* if OK, compute maximum address value */
if (!(drive->status & ERR_STAT)) {
@@ -1005,7 +1023,7 @@

args.taskfile.device_head = ((addr_req >> 24) & 0x0f) | 0x40;
args.cmd = WIN_SET_MAX;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);

/* if OK, read new maximum address value */
if (!(drive->status & ERR_STAT)) {
@@ -1038,7 +1056,7 @@
args.hobfile.high_cylinder = (addr_req >>= 8);
args.hobfile.device_head = 0x40;

- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);

/* if OK, compute maximum address value */
if (!(drive->status & ERR_STAT)) {
diff -urN linux-2.5.24/drivers/ide/ide-floppy.c linux/drivers/ide/ide-floppy.c
--- linux-2.5.24/drivers/ide/ide-floppy.c 2002-06-21 00:53:47.000000000 +0200
+++ linux/drivers/ide/ide-floppy.c 2002-06-23 20:12:27.000000000 +0200
@@ -315,270 +315,6 @@
#define IDEFLOPPY_ERROR_GENERAL 101

/*
- * The ATAPI Status Register.
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned check :1; /* Error occurred */
- unsigned idx :1; /* Reserved */
- unsigned corr :1; /* Correctable error occurred */
- unsigned drq :1; /* Data is request by the device */
- unsigned dsc :1; /* Media access command finished */
- unsigned reserved5 :1; /* Reserved */
- unsigned drdy :1; /* Ignored for ATAPI commands (ready to accept ATA command) */
- unsigned bsy :1; /* The device has access to the command block */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned bsy :1; /* The device has access to the command block */
- unsigned drdy :1; /* Ignored for ATAPI commands (ready to accept ATA command) */
- unsigned reserved5 :1; /* Reserved */
- unsigned dsc :1; /* Media access command finished */
- unsigned drq :1; /* Data is request by the device */
- unsigned corr :1; /* Correctable error occurred */
- unsigned idx :1; /* Reserved */
- unsigned check :1; /* Error occurred */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- } b;
-} idefloppy_status_reg_t;
-
-/*
- * The ATAPI error register.
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned ili :1; /* Illegal Length Indication */
- unsigned eom :1; /* End Of Media Detected */
- unsigned abrt :1; /* Aborted command - As defined by ATA */
- unsigned mcr :1; /* Media Change Requested - As defined by ATA */
- unsigned sense_key :4; /* Sense key of the last failed packet command */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned sense_key :4; /* Sense key of the last failed packet command */
- unsigned mcr :1; /* Media Change Requested - As defined by ATA */
- unsigned abrt :1; /* Aborted command - As defined by ATA */
- unsigned eom :1; /* End Of Media Detected */
- unsigned ili :1; /* Illegal Length Indication */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- } b;
-} idefloppy_error_reg_t;
-
-/*
- * ATAPI Feature Register
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned dma :1; /* Using DMA or PIO */
- unsigned reserved321 :3; /* Reserved */
- unsigned reserved654 :3; /* Reserved (Tag Type) */
- unsigned reserved7 :1; /* Reserved */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved7 :1; /* Reserved */
- unsigned reserved654 :3; /* Reserved (Tag Type) */
- unsigned reserved321 :3; /* Reserved */
- unsigned dma :1; /* Using DMA or PIO */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- } b;
-} idefloppy_feature_reg_t;
-
-/*
- * ATAPI Byte Count Register.
- */
-typedef union {
- unsigned all :16;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned low :8; /* LSB */
- unsigned high :8; /* MSB */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned high :8; /* MSB */
- unsigned low :8; /* LSB */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- } b;
-} idefloppy_bcount_reg_t;
-
-/*
- * ATAPI Interrupt Reason Register.
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned cod :1; /* Information transferred is command (1) or data (0) */
- unsigned io :1; /* The device requests us to read (1) or write (0) */
- unsigned reserved :6; /* Reserved */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved :6; /* Reserved */
- unsigned io :1; /* The device requests us to read (1) or write (0) */
- unsigned cod :1; /* Information transferred is command (1) or data (0) */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- } b;
-} idefloppy_ireason_reg_t;
-
-/*
- * ATAPI floppy Drive Select Register
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned sam_lun :3; /* Logical unit number */
- unsigned reserved3 :1; /* Reserved */
- unsigned drv :1; /* The responding drive will be drive 0 (0) or drive 1 (1) */
- unsigned one5 :1; /* Should be set to 1 */
- unsigned reserved6 :1; /* Reserved */
- unsigned one7 :1; /* Should be set to 1 */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned one7 :1; /* Should be set to 1 */
- unsigned reserved6 :1; /* Reserved */
- unsigned one5 :1; /* Should be set to 1 */
- unsigned drv :1; /* The responding drive will be drive 0 (0) or drive 1 (1) */
- unsigned reserved3 :1; /* Reserved */
- unsigned sam_lun :3; /* Logical unit number */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- } b;
-} idefloppy_drivesel_reg_t;
-
-/*
- * ATAPI Device Control Register
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned zero0 :1; /* Should be set to zero */
- unsigned nien :1; /* Device interrupt is disabled (1) or enabled (0) */
- unsigned srst :1; /* ATA software reset. ATAPI devices should use the new ATAPI srst. */
- unsigned one3 :1; /* Should be set to 1 */
- unsigned reserved4567 :4; /* Reserved */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved4567 :4; /* Reserved */
- unsigned one3 :1; /* Should be set to 1 */
- unsigned srst :1; /* ATA software reset. ATAPI devices should use the new ATAPI srst. */
- unsigned nien :1; /* Device interrupt is disabled (1) or enabled (0) */
- unsigned zero0 :1; /* Should be set to zero */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- } b;
-} idefloppy_control_reg_t;
-
-/*
- * The following is used to format the general configuration word of
- * the ATAPI IDENTIFY DEVICE command.
- */
-struct idefloppy_id_gcw {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned packet_size :2; /* Packet Size */
- unsigned reserved234 :3; /* Reserved */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned removable :1; /* Removable media */
- unsigned device_type :5; /* Device type */
- unsigned reserved13 :1; /* Reserved */
- unsigned protocol :2; /* Protocol type */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned protocol :2; /* Protocol type */
- unsigned reserved13 :1; /* Reserved */
- unsigned device_type :5; /* Device type */
- unsigned removable :1; /* Removable media */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned reserved234 :3; /* Reserved */
- unsigned packet_size :2; /* Packet Size */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-};
-
-/*
- * INQUIRY packet command - Data Format
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned device_type :5; /* Peripheral Device Type */
- unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */
- unsigned reserved1_6t0 :7; /* Reserved */
- unsigned rmb :1; /* Removable Medium Bit */
- unsigned ansi_version :3; /* ANSI Version */
- unsigned ecma_version :3; /* ECMA Version */
- unsigned iso_version :2; /* ISO Version */
- unsigned response_format :4; /* Response Data Format */
- unsigned reserved3_45 :2; /* Reserved */
- unsigned reserved3_6 :1; /* TrmIOP - Reserved */
- unsigned reserved3_7 :1; /* AENC - Reserved */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */
- unsigned device_type :5; /* Peripheral Device Type */
- unsigned rmb :1; /* Removable Medium Bit */
- unsigned reserved1_6t0 :7; /* Reserved */
- unsigned iso_version :2; /* ISO Version */
- unsigned ecma_version :3; /* ECMA Version */
- unsigned ansi_version :3; /* ANSI Version */
- unsigned reserved3_7 :1; /* AENC - Reserved */
- unsigned reserved3_6 :1; /* TrmIOP - Reserved */
- unsigned reserved3_45 :2; /* Reserved */
- unsigned response_format :4; /* Response Data Format */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 additional_length; /* Additional Length (total_length-4) */
- u8 rsv5, rsv6, rsv7; /* Reserved */
- u8 vendor_id[8]; /* Vendor Identification */
- u8 product_id[16]; /* Product Identification */
- u8 revision_level[4]; /* Revision Level */
- u8 vendor_specific[20]; /* Vendor Specific - Optional */
- u8 reserved56t95[40]; /* Reserved - Optional */
- /* Additional information may be returned */
-} idefloppy_inquiry_result_t;
-
-/*
- * REQUEST SENSE packet command result - Data Format.
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned error_code :7; /* Current error (0x70) */
- unsigned valid :1; /* The information field conforms to SFF-8070i */
- u8 reserved1 :8; /* Reserved */
- unsigned sense_key :4; /* Sense Key */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned reserved2_67 :2;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned valid :1; /* The information field conforms to SFF-8070i */
- unsigned error_code :7; /* Current error (0x70) */
- u8 reserved1 :8; /* Reserved */
- unsigned reserved2_67 :2;
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned sense_key :4; /* Sense Key */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u32 information __attribute__ ((packed));
- u8 asl; /* Additional sense length (n-7) */
- u32 command_specific; /* Additional command specific information */
- u8 asc; /* Additional Sense Code */
- u8 ascq; /* Additional Sense Code Qualifier */
- u8 replaceable_unit_code; /* Field Replaceable Unit Code */
- u8 sksv[3];
- u8 pad[2]; /* Padding to 20 bytes */
-} idefloppy_request_sense_result_t;
-
-/*
* Pages of the SELECT SENSE / MODE SENSE packet commands.
*/
#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
@@ -602,9 +338,6 @@
u8 reserved[4];
} idefloppy_mode_parameter_header_t;

-#define IDEFLOPPY_MIN(a,b) ((a)<(b) ? (a):(b))
-#define IDEFLOPPY_MAX(a,b) ((a)>(b) ? (a):(b))
-
/*
* idefloppy_end_request is used to finish servicing a request.
*
@@ -663,7 +396,7 @@
atapi_discard_data(drive, bcount);
return;
}
- count = IDEFLOPPY_MIN(bio->bi_size - pc->b_count, bcount);
+ count = min_t(unsigned int, bio->bi_size - pc->b_count, bcount);
atapi_read(drive, bio_data(bio) + pc->b_count, count);
bcount -= count; pc->b_count += count;
}
@@ -690,7 +423,7 @@
atapi_write_zeros (drive, bcount);
return;
}
- count = IDEFLOPPY_MIN(pc->b_count, bcount);
+ count = min_t(unsigned int, pc->b_count, bcount);
atapi_write(drive, pc->b_data, count);
bcount -= count; pc->b_data += count; pc->b_count -= count;
}
@@ -743,13 +476,13 @@
* idefloppy_analyze_error is called on each failed packet command retry
* to analyze the request sense.
*/
-static void idefloppy_analyze_error(struct ata_device *drive, idefloppy_request_sense_result_t *result)
+static void idefloppy_analyze_error(struct ata_device *drive, atapi_request_sense_result_t *result)
{
idefloppy_floppy_t *floppy = drive->driver_data;

floppy->sense_key = result->sense_key; floppy->asc = result->asc; floppy->ascq = result->ascq;
- floppy->progress_indication= result->sksv[0] & 0x80 ?
- (unsigned short)get_unaligned((u16 *)(result->sksv+1)):0x10000;
+ floppy->progress_indication= result->sksv ?
+ (unsigned short)get_unaligned((u16 *)(result->sk_specific)):0x10000;
#if IDEFLOPPY_DEBUG_LOG
if (floppy->failed_pc)
printk (KERN_INFO "ide-floppy: pc = %x, sense key = %x, asc = %x, ascq = %x\n",floppy->failed_pc->c[0],result->sense_key,result->asc,result->ascq);
@@ -766,7 +499,7 @@
printk (KERN_INFO "ide-floppy: Reached idefloppy_request_sense_callback\n");
#endif
if (!floppy->pc->error) {
- idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer);
+ idefloppy_analyze_error(drive,(atapi_request_sense_result_t *) floppy->pc->buffer);
idefloppy_end_request(drive, rq, 1);
} else {
printk (KERN_ERR "Error in REQUEST SENSE itself - Aborting request!\n");
@@ -806,7 +539,7 @@
{
struct atapi_packet_command *pc;
struct request *rq;
- idefloppy_error_reg_t error;
+ atapi_error_reg_t error;

error.all = IN_BYTE(IDE_ERROR_REG);
pc = idefloppy_next_pc_storage(drive);
@@ -824,9 +557,9 @@
unsigned long flags;
struct ata_channel *ch = drive->channel;
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_status_reg_t status;
- idefloppy_bcount_reg_t bcount;
- idefloppy_ireason_reg_t ireason;
+ atapi_status_reg_t status;
+ atapi_bcount_reg_t bcount;
+ atapi_ireason_reg_t ireason;
struct atapi_packet_command *pc = floppy->pc;
unsigned int temp;

@@ -955,7 +688,7 @@
struct ata_channel *ch = drive->channel;
ide_startstop_t startstop;
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_ireason_reg_t ireason;
+ atapi_ireason_reg_t ireason;
int ret;

/* FIXME: Move this lock upwards.
@@ -1010,7 +743,7 @@
struct ata_channel *ch = drive->channel;
idefloppy_floppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
- idefloppy_ireason_reg_t ireason;
+ atapi_ireason_reg_t ireason;
int ret;

if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
@@ -1057,7 +790,7 @@
struct atapi_packet_command *pc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_bcount_reg_t bcount;
+ atapi_bcount_reg_t bcount;
int dma_ok = 0;
ata_handler_t *pkt_xfer_routine;

@@ -1655,7 +1388,7 @@
}
else
{
- idefloppy_status_reg_t status;
+ atapi_status_reg_t status;
unsigned long flags;

__save_flags(flags);
@@ -1861,7 +1594,7 @@
*/
static int idefloppy_identify_device(struct ata_device *drive,struct hd_driveid *id)
{
- struct idefloppy_id_gcw gcw;
+ struct atapi_id_gcw gcw;
#if IDEFLOPPY_DEBUG_INFO
unsigned short mask,i;
char buffer[80];
@@ -1976,7 +1709,7 @@
*/
static void idefloppy_setup(struct ata_device *drive, idefloppy_floppy_t *floppy)
{
- struct idefloppy_id_gcw gcw;
+ struct atapi_id_gcw gcw;
int i;

*((unsigned short *) &gcw) = drive->id->config;
diff -urN linux-2.5.24/drivers/ide/ide-pmac.c linux/drivers/ide/ide-pmac.c
--- linux-2.5.24/drivers/ide/ide-pmac.c 2002-06-21 00:53:55.000000000 +0200
+++ linux/drivers/ide/ide-pmac.c 2002-06-24 16:07:16.000000000 +0200
@@ -1491,7 +1491,7 @@
set_bit(IDE_DMA, drive->channel->active);
// if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
// printk(KERN_WARNING "ide%d, timeout waiting \
- for dbdma command stop\n", ix);
+// for dbdma command stop\n", ix);
return 1;
}
udelay(1);
diff -urN linux-2.5.24/drivers/ide/ide-tape.c linux/drivers/ide/ide-tape.c
--- linux-2.5.24/drivers/ide/ide-tape.c 2002-06-21 00:53:46.000000000 +0200
+++ linux/drivers/ide/ide-tape.c 2002-06-23 20:12:28.000000000 +0200
@@ -771,32 +771,6 @@
} idetape_stage_t;

/*
- * REQUEST SENSE packet command result - Data Format.
- */
-typedef struct {
- unsigned error_code :7; /* Current of deferred errors */
- unsigned valid :1; /* The information field conforms to QIC-157C */
- __u8 reserved1 :8; /* Segment Number - Reserved */
- unsigned sense_key :4; /* Sense Key */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned eom :1; /* End Of Medium */
- unsigned filemark :1; /* Filemark */
- __u32 information __attribute__ ((packed));
- __u8 asl; /* Additional sense length (n-7) */
- __u32 command_specific; /* Additional command specific information */
- __u8 asc; /* Additional Sense Code */
- __u8 ascq; /* Additional Sense Code Qualifier */
- __u8 replaceable_unit_code; /* Field Replaceable Unit Code */
- unsigned sk_specific1 :7; /* Sense Key Specific */
- unsigned sksv :1; /* Sense Key Specific information is valid */
- __u8 sk_specific2; /* Sense Key Specific */
- __u8 sk_specific3; /* Sense Key Specific */
- __u8 pad[2]; /* Padding to 20 bytes */
-} idetape_request_sense_result_t;
-
-
-/*
* Most of our global data which we need to save even as we leave the
* driver due to an interrupt or a timer event is stored in a variable
* of type idetape_tape_t, defined below.
@@ -920,7 +894,7 @@
int avg_size;
int avg_speed;

- idetape_request_sense_result_t sense; /* last sense information */
+ atapi_request_sense_result_t sense; /* last sense information */

char vendor_id[10];
char product_id[18];
@@ -1124,101 +1098,6 @@
#define IDETAPE_ERROR_EOD 103

/*
- * The ATAPI Status Register.
- */
-typedef union {
- unsigned all :8;
- struct {
- unsigned check :1; /* Error occurred */
- unsigned idx :1; /* Reserved */
- unsigned corr :1; /* Correctable error occurred */
- unsigned drq :1; /* Data is request by the device */
- unsigned dsc :1; /* Buffer availability / Media access command finished */
- unsigned reserved5 :1; /* Reserved */
- unsigned drdy :1; /* Ignored for ATAPI commands (ready to accept ATA command) */
- unsigned bsy :1; /* The device has access to the command block */
- } b;
-} idetape_status_reg_t;
-
-/*
- * The ATAPI error register.
- */
-typedef union {
- unsigned all :8;
- struct {
- unsigned ili :1; /* Illegal Length Indication */
- unsigned eom :1; /* End Of Media Detected */
- unsigned abrt :1; /* Aborted command - As defined by ATA */
- unsigned mcr :1; /* Media Change Requested - As defined by ATA */
- unsigned sense_key :4; /* Sense key of the last failed packet command */
- } b;
-} idetape_error_reg_t;
-
-/*
- * ATAPI Feature Register
- */
-typedef union {
- unsigned all :8;
- struct {
- unsigned dma :1; /* Using DMA or PIO */
- unsigned reserved321 :3; /* Reserved */
- unsigned reserved654 :3; /* Reserved (Tag Type) */
- unsigned reserved7 :1; /* Reserved */
- } b;
-} idetape_feature_reg_t;
-
-/*
- * ATAPI Byte Count Register.
- */
-typedef union {
- unsigned all :16;
- struct {
- unsigned low :8; /* LSB */
- unsigned high :8; /* MSB */
- } b;
-} idetape_bcount_reg_t;
-
-/*
- * ATAPI Interrupt Reason Register.
- */
-typedef union {
- unsigned all :8;
- struct {
- unsigned cod :1; /* Information transferred is command (1) or data (0) */
- unsigned io :1; /* The device requests us to read (1) or write (0) */
- unsigned reserved :6; /* Reserved */
- } b;
-} idetape_ireason_reg_t;
-
-/*
- * ATAPI Drive Select Register
- */
-typedef union {
- unsigned all :8;
- struct {
- unsigned sam_lun :4; /* Should be zero with ATAPI (not used) */
- unsigned drv :1; /* The responding drive will be drive 0 (0) or drive 1 (1) */
- unsigned one5 :1; /* Should be set to 1 */
- unsigned reserved6 :1; /* Reserved */
- unsigned one7 :1; /* Should be set to 1 */
- } b;
-} idetape_drivesel_reg_t;
-
-/*
- * ATAPI Device Control Register
- */
-typedef union {
- unsigned all :8;
- struct {
- unsigned zero0 :1; /* Should be set to zero */
- unsigned nien :1; /* Device interrupt is disabled (1) or enabled (0) */
- unsigned srst :1; /* ATA software reset. ATAPI devices should use the new ATAPI srst. */
- unsigned one3 :1; /* Should be set to 1 */
- unsigned reserved4567 :4; /* Reserved */
- } b;
-} idetape_control_reg_t;
-
-/*
* idetape_chrdev_t provides the link between out character device
* interface and our block device interface and the corresponding
* ata_device structure.
@@ -1228,45 +1107,6 @@
} idetape_chrdev_t;

/*
- * The following is used to format the general configuration word of
- * the ATAPI IDENTIFY DEVICE command.
- */
-struct idetape_id_gcw {
- unsigned packet_size :2; /* Packet Size */
- unsigned reserved234 :3; /* Reserved */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned removable :1; /* Removable media */
- unsigned device_type :5; /* Device type */
- unsigned reserved13 :1; /* Reserved */
- unsigned protocol :2; /* Protocol type */
-};
-
-/*
- * INQUIRY packet command - Data Format (From Table 6-8 of QIC-157C)
- */
-typedef struct {
- unsigned device_type :5; /* Peripheral Device Type */
- unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */
- unsigned reserved1_6t0 :7; /* Reserved */
- unsigned rmb :1; /* Removable Medium Bit */
- unsigned ansi_version :3; /* ANSI Version */
- unsigned ecma_version :3; /* ECMA Version */
- unsigned iso_version :2; /* ISO Version */
- unsigned response_format :4; /* Response Data Format */
- unsigned reserved3_45 :2; /* Reserved */
- unsigned reserved3_6 :1; /* TrmIOP - Reserved */
- unsigned reserved3_7 :1; /* AENC - Reserved */
- __u8 additional_length; /* Additional Length (total_length-4) */
- __u8 rsv5, rsv6, rsv7; /* Reserved */
- __u8 vendor_id[8]; /* Vendor Identification */
- __u8 product_id[16]; /* Product Identification */
- __u8 revision_level[4]; /* Revision Level */
- __u8 vendor_specific[20]; /* Vendor Specific - Optional */
- __u8 reserved56t95[40]; /* Reserved - Optional */
- /* Additional information may be returned */
-} idetape_inquiry_result_t;
-
-/*
* READ POSITION packet command - Data Format (From Table 6-57)
*/
typedef struct {
@@ -1574,7 +1414,7 @@
* to analyze the request sense. We currently do not utilize this
* information.
*/
-static void idetape_analyze_error(struct ata_device *drive, idetape_request_sense_result_t *result)
+static void idetape_analyze_error(struct ata_device *drive, atapi_request_sense_result_t *result)
{
idetape_tape_t *tape = drive->driver_data;
struct atapi_packet_command *pc = tape->failed_pc;
@@ -1887,7 +1727,7 @@
printk (KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n");
#endif
if (!tape->pc->error) {
- idetape_analyze_error (drive, (idetape_request_sense_result_t *) tape->pc->buffer);
+ idetape_analyze_error (drive, (atapi_request_sense_result_t *) tape->pc->buffer);
idetape_end_request(drive, rq, 1);
} else {
printk (KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n");
@@ -1941,7 +1781,7 @@
idetape_tape_t *tape = drive->driver_data;
struct atapi_packet_command *pc;
struct request *rq;
- idetape_error_reg_t error;
+ atapi_error_reg_t error;

error.all = IN_BYTE (IDE_ERROR_REG);
pc = idetape_next_pc_storage (drive);
@@ -1981,9 +1821,9 @@
unsigned long flags;
struct ata_channel *ch = drive->channel;
idetape_tape_t *tape = drive->driver_data;
- idetape_status_reg_t status;
- idetape_bcount_reg_t bcount;
- idetape_ireason_reg_t ireason;
+ atapi_status_reg_t status;
+ atapi_bcount_reg_t bcount;
+ atapi_ireason_reg_t ireason;
struct atapi_packet_command *pc = tape->pc;

unsigned int temp;
@@ -2196,7 +2036,7 @@
struct ata_channel *ch = drive->channel;
idetape_tape_t *tape = drive->driver_data;
struct atapi_packet_command *pc = tape->pc;
- idetape_ireason_reg_t ireason;
+ atapi_ireason_reg_t ireason;
int retries = 100;
ide_startstop_t startstop;
int ret;
@@ -2240,7 +2080,7 @@
struct request *rq, struct atapi_packet_command *pc)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_bcount_reg_t bcount;
+ atapi_bcount_reg_t bcount;
int dma_ok = 0;

#if IDETAPE_DEBUG_BUGS
@@ -2451,7 +2291,7 @@
{
idetape_tape_t *tape = drive->driver_data;
struct atapi_packet_command *pc = tape->pc;
- idetape_status_reg_t status;
+ atapi_status_reg_t status;

if (tape->onstream)
printk(KERN_INFO "ide-tape: bug: onstream, media_access_finished\n");
@@ -2609,7 +2449,7 @@
idetape_tape_t *tape = drive->driver_data;
struct atapi_packet_command *pc;
struct request *postponed_rq = tape->postponed_rq;
- idetape_status_reg_t status;
+ atapi_status_reg_t status;
int ret;

#if IDETAPE_DEBUG_LOG
@@ -5572,7 +5412,7 @@
*/
static int idetape_identify_device(struct ata_device *drive,struct hd_driveid *id)
{
- struct idetape_id_gcw gcw;
+ struct atapi_id_gcw gcw;
#if IDETAPE_DEBUG_INFO
unsigned short mask,i;
#endif /* IDETAPE_DEBUG_INFO */
@@ -5791,14 +5631,14 @@
char *r;
idetape_tape_t *tape = drive->driver_data;
struct atapi_packet_command pc;
- idetape_inquiry_result_t *inquiry;
+ atapi_inquiry_result_t *inquiry;

idetape_create_inquiry_cmd(&pc);
if (idetape_queue_pc_tail (drive, &pc)) {
printk (KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", tape->name);
return;
}
- inquiry = (idetape_inquiry_result_t *) pc.buffer;
+ inquiry = (atapi_inquiry_result_t *) pc.buffer;
memcpy(tape->vendor_id, inquiry->vendor_id, 8);
memcpy(tape->product_id, inquiry->product_id, 16);
memcpy(tape->firmware_revision, inquiry->revision_level, 4);
@@ -5985,7 +5825,7 @@
unsigned long t1, tmid, tn;
unsigned long t;
int speed;
- struct idetape_id_gcw gcw;
+ struct atapi_id_gcw gcw;
int stage_size;
struct sysinfo si;

diff -urN linux-2.5.24/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.24/drivers/ide/ide-taskfile.c 2002-06-21 00:53:53.000000000 +0200
+++ linux/drivers/ide/ide-taskfile.c 2002-06-23 20:12:28.000000000 +0200
@@ -242,7 +242,7 @@
/*
* Invoked on completion of a special REQ_SPECIAL command.
*/
-ide_startstop_t ata_special_intr(struct ata_device *drive, struct
+static ide_startstop_t special_intr(struct ata_device *drive, struct
request *rq) {

struct ata_taskfile *ar = rq->special;
@@ -292,15 +292,16 @@
return ret;
}

-int ide_raw_taskfile(struct ata_device *drive, struct ata_taskfile *ar)
+int ide_raw_taskfile(struct ata_device *drive, struct ata_taskfile *ar, char *buf)
{
struct request req;

ar->command_type = IDE_DRIVE_TASK_NO_DATA;
- ar->XXX_handler = ata_special_intr;
+ ar->XXX_handler = special_intr;

memset(&req, 0, sizeof(req));
req.flags = REQ_SPECIAL;
+ req.buffer = buf;
req.special = ar;

return ide_do_drive_cmd(drive, &req, ide_wait);
@@ -310,5 +311,4 @@
EXPORT_SYMBOL(ide_do_drive_cmd);
EXPORT_SYMBOL(ata_read);
EXPORT_SYMBOL(ata_write);
-EXPORT_SYMBOL(ata_special_intr);
EXPORT_SYMBOL(ide_raw_taskfile);
diff -urN linux-2.5.24/drivers/ide/ioctl.c linux/drivers/ide/ioctl.c
--- linux-2.5.24/drivers/ide/ioctl.c 2002-06-21 00:53:48.000000000 +0200
+++ linux/drivers/ide/ioctl.c 2002-06-23 20:12:28.000000000 +0200
@@ -47,7 +47,6 @@
u8 *argbuf = vals;
int argsize = 4;
struct ata_taskfile args;
- struct request req;

/* Second phase.
*/
@@ -80,15 +79,7 @@

/* Issue ATA command and wait for completion.
*/
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.XXX_handler = ata_special_intr;
-
- memset(&req, 0, sizeof(req));
- req.flags = REQ_SPECIAL;
- req.special = &args;
-
- req.buffer = argbuf + 4;
- err = ide_do_drive_cmd(drive, &req, ide_wait);
+ err = ide_raw_taskfile(drive, &args, argbuf + 4);

argbuf[0] = drive->status;
argbuf[1] = args.taskfile.feature;
diff -urN linux-2.5.24/drivers/ide/tcq.c linux/drivers/ide/tcq.c
--- linux-2.5.24/drivers/ide/tcq.c 2002-06-21 00:53:55.000000000 +0200
+++ linux/drivers/ide/tcq.c 2002-06-23 20:12:28.000000000 +0200
@@ -441,7 +441,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = 0x01;
args.cmd = WIN_NOP;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
if (args.taskfile.feature & ABRT_ERR)
return 1;

@@ -469,7 +469,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_EN_WCACHE;
args.cmd = WIN_SETFEATURES;
- if (ide_raw_taskfile(drive, &args)) {
+ if (ide_raw_taskfile(drive, &args, NULL)) {
printk("%s: failed to enable write cache\n", drive->name);
return 1;
}
@@ -481,7 +481,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_DIS_RI;
args.cmd = WIN_SETFEATURES;
- if (ide_raw_taskfile(drive, &args)) {
+ if (ide_raw_taskfile(drive, &args, NULL)) {
printk("%s: disabling release interrupt fail\n", drive->name);
return 1;
}
@@ -493,7 +493,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_EN_SI;
args.cmd = WIN_SETFEATURES;
- if (ide_raw_taskfile(drive, &args)) {
+ if (ide_raw_taskfile(drive, &args, NULL)) {
printk("%s: enabling service interrupt fail\n", drive->name);
return 1;
}
diff -urN linux-2.5.24/include/linux/atapi.h linux/include/linux/atapi.h
--- linux-2.5.24/include/linux/atapi.h 2002-06-21 00:53:49.000000000 +0200
+++ linux/include/linux/atapi.h 2002-06-23 20:12:28.000000000 +0200
@@ -12,6 +12,9 @@
* more details.
*/

+#include <linux/types.h>
+#include <asm/byteorder.h>
+
/*
* With each packet command, we allocate a buffer.
* This is used for several packet
@@ -79,3 +82,281 @@
extern void atapi_read(struct ata_device *, u8 *, unsigned int);
extern void atapi_write(struct ata_device *, u8 *, unsigned int);

+
+/*
+ * ATAPI Status Register.
+ */
+typedef union {
+ u8 all : 8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 check : 1; /* Error occurred */
+ u8 idx : 1; /* Reserved */
+ u8 corr : 1; /* Correctable error occurred */
+ u8 drq : 1; /* Data is request by the device */
+ u8 dsc : 1; /* Media access command finished / Buffer availability */
+ u8 reserved5 : 1; /* Reserved */
+ u8 drdy : 1; /* Ignored for ATAPI commands (ready to accept ATA command) */
+ u8 bsy : 1; /* The device has access to the command block */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 bsy : 1;
+ u8 drdy : 1;
+ u8 reserved5 : 1;
+ u8 dsc : 1;
+ u8 drq : 1;
+ u8 corr : 1;
+ u8 idx : 1;
+ u8 check : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_status_reg_t;
+
+/*
+ * ATAPI error register.
+ */
+typedef union {
+ u8 all : 8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 ili : 1; /* Illegal Length Indication */
+ u8 eom : 1; /* End Of Media Detected */
+ u8 abrt : 1; /* Aborted command - As defined by ATA */
+ u8 mcr : 1; /* Media Change Requested - As defined by ATA */
+ u8 sense_key : 4; /* Sense key of the last failed packet command */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 sense_key : 4;
+ u8 mcr : 1;
+ u8 abrt : 1;
+ u8 eom : 1;
+ u8 ili : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_error_reg_t;
+
+/* Currently unused, but please do not remove. --bkz */
+/*
+ * ATAPI Feature Register.
+ */
+typedef union {
+ u8 all : 8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 dma : 1; /* Using DMA or PIO */
+ u8 reserved321 : 3; /* Reserved */
+ u8 reserved654 : 3; /* Reserved (Tag Type) */
+ u8 reserved7 : 1; /* Reserved */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 reserved7 : 1;
+ u8 reserved654 : 3;
+ u8 reserved321 : 3;
+ u8 dma : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_feature_reg_t;
+
+/*
+ * ATAPI Byte Count Register.
+ */
+typedef union {
+ u16 all : 16;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 low; /* LSB */
+ u8 high; /* MSB */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 high;
+ u8 low;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_bcount_reg_t;
+
+/*
+ * ATAPI Interrupt Reason Register.
+ */
+typedef union {
+ u8 all : 8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 cod : 1; /* Information transferred is command (1) or data (0) */
+ u8 io : 1; /* The device requests us to read (1) or write (0) */
+ u8 reserved : 6; /* Reserved */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 reserved : 6;
+ u8 io : 1;
+ u8 cod : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_ireason_reg_t;
+
+/* Currently unused, but please do not remove. --bkz */
+/*
+ * ATAPI Drive Select Register.
+ */
+typedef union {
+ u8 all :8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 sam_lun :3; /* Logical unit number */
+ u8 reserved3 :1; /* Reserved */
+ u8 drv :1; /* The responding drive will be drive 0 (0) or drive 1 (1) */
+ u8 one5 :1; /* Should be set to 1 */
+ u8 reserved6 :1; /* Reserved */
+ u8 one7 :1; /* Should be set to 1 */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 one7 :1;
+ u8 reserved6 :1;
+ u8 one5 :1;
+ u8 drv :1;
+ u8 reserved3 :1;
+ u8 sam_lun :3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_drivesel_reg_t;
+
+/* Currently unused, but please do not remove. --bkz */
+/*
+ * ATAPI Device Control Register.
+ */
+typedef union {
+ u8 all : 8;
+ struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 zero0 : 1; /* Should be set to zero */
+ u8 nien : 1; /* Device interrupt is disabled (1) or enabled (0) */
+ u8 srst : 1; /* ATA software reset. ATAPI devices should use the new ATAPI srst. */
+ u8 one3 : 1; /* Should be set to 1 */
+ u8 reserved4567 : 4; /* Reserved */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 reserved4567 : 4;
+ u8 one3 : 1;
+ u8 srst : 1;
+ u8 nien : 1;
+ u8 zero0 : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } b;
+} atapi_control_reg_t;
+
+/*
+ * The following is used to format the general configuration word
+ * of the ATAPI IDENTIFY DEVICE command.
+ */
+struct atapi_id_gcw {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 packet_size : 2; /* Packet Size */
+ u8 reserved234 : 3; /* Reserved */
+ u8 drq_type : 2; /* Command packet DRQ type */
+ u8 removable : 1; /* Removable media */
+ u8 device_type : 5; /* Device type */
+ u8 reserved13 : 1; /* Reserved */
+ u8 protocol : 2; /* Protocol type */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 protocol : 2;
+ u8 reserved13 : 1;
+ u8 device_type : 5;
+ u8 removable : 1;
+ u8 drq_type : 2;
+ u8 reserved234 : 3;
+ u8 packet_size : 2;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+};
+
+/*
+ * INQUIRY packet command - Data Format.
+ */
+typedef struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 device_type : 5; /* Peripheral Device Type */
+ u8 reserved0_765 : 3; /* Peripheral Qualifier - Reserved */
+ u8 reserved1_6t0 : 7; /* Reserved */
+ u8 rmb : 1; /* Removable Medium Bit */
+ u8 ansi_version : 3; /* ANSI Version */
+ u8 ecma_version : 3; /* ECMA Version */
+ u8 iso_version : 2; /* ISO Version */
+ u8 response_format : 4; /* Response Data Format */
+ u8 reserved3_45 : 2; /* Reserved */
+ u8 reserved3_6 : 1; /* TrmIOP - Reserved */
+ u8 reserved3_7 : 1; /* AENC - Reserved */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 reserved0_765 : 3;
+ u8 device_type : 5;
+ u8 rmb : 1;
+ u8 reserved1_6t0 : 7;
+ u8 iso_version : 2;
+ u8 ecma_version : 3;
+ u8 ansi_version : 3;
+ u8 reserved3_7 : 1;
+ u8 reserved3_6 : 1;
+ u8 reserved3_45 : 2;
+ u8 response_format : 4;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ u8 additional_length; /* Additional Length (total_length-4) */
+ u8 rsv5, rsv6, rsv7; /* Reserved */
+ u8 vendor_id[8]; /* Vendor Identification */
+ u8 product_id[16]; /* Product Identification */
+ u8 revision_level[4]; /* Revision Level */
+ u8 vendor_specific[20]; /* Vendor Specific - Optional */
+ u8 reserved56t95[40]; /* Reserved - Optional */
+ /* Additional information may be returned */
+} atapi_inquiry_result_t;
+
+/*
+ * REQUEST SENSE packet command result - Data Format.
+ */
+typedef struct atapi_request_sense {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 error_code : 7; /* Error Code (0x70 - current or 0x71 - deferred) */
+ u8 valid : 1; /* The information field conforms to standard */
+ u8 reserved1 : 8; /* Reserved (Segment Number) */
+ u8 sense_key : 4; /* Sense Key */
+ u8 reserved2_4 : 1; /* Reserved */
+ u8 ili : 1; /* Incorrect Length Indicator */
+ u8 eom : 1; /* End Of Medium */
+ u8 filemark : 1; /* Filemark */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 valid : 1;
+ u8 error_code : 7;
+ u8 reserved1 : 8;
+ u8 filemark : 1;
+ u8 eom : 1;
+ u8 ili : 1;
+ u8 reserved2_4 : 1;
+ u8 sense_key : 4;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ u32 information __attribute__ ((packed));
+ u8 asl; /* Additional sense length (n-7) */
+ u32 command_specific; /* Additional command specific information */
+ u8 asc; /* Additional Sense Code */
+ u8 ascq; /* Additional Sense Code Qualifier */
+ u8 replaceable_unit_code; /* Field Replaceable Unit Code */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 sk_specific1 : 7; /* Sense Key Specific */
+ u8 sksv : 1; /* Sense Key Specific information is valid */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ u8 sksv : 1; /* Sense Key Specific information is valid */
+ u8 sk_specific1 : 7; /* Sense Key Specific */
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ u8 sk_specific[2]; /* Sense Key Specific */
+ u8 pad[2]; /* Padding to 20 bytes */
+} atapi_request_sense_result_t;
diff -urN linux-2.5.24/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.24/include/linux/ide.h 2002-06-21 00:53:46.000000000 +0200
+++ linux/include/linux/ide.h 2002-06-24 17:03:21.000000000 +0200
@@ -658,31 +658,7 @@
extern void ata_read(struct ata_device *, void *, unsigned int);
extern void ata_write(struct ata_device *, void *, unsigned int);

-/*
- * Special Flagged Register Validation Caller
- */
-
-/*
- * for now, taskfile requests are special :/
- */
-static inline char *ide_map_rq(struct request *rq, unsigned long *flags)
-{
- if (rq->bio)
- return bio_kmap_irq(rq->bio, flags) + ide_rq_offset(rq);
- else
- return rq->buffer + ((rq)->nr_sectors - (rq)->current_nr_sectors) * SECTOR_SIZE;
-}
-
-static inline void ide_unmap_rq(struct request *rq, char *to,
- unsigned long *flags)
-{
- if (rq->bio)
- bio_kunmap_irq(to, flags);
-}
-
-extern ide_startstop_t ata_special_intr(struct ata_device *, struct request *);
-extern int ide_raw_taskfile(struct ata_device *, struct ata_taskfile *);
-
+extern int ide_raw_taskfile(struct ata_device *, struct ata_taskfile *, char *);
extern void ide_fix_driveid(struct hd_driveid *id);
extern int ide_config_drive_speed(struct ata_device *, byte);
extern byte eighty_ninty_three(struct ata_device *);
@@ -756,9 +732,12 @@

static inline int udma_stop(struct ata_device *drive)
{
+ int ret;
+
+ ret = drive->channel->udma_stop(drive);
clear_bit(IDE_DMA, drive->channel->active);

- return drive->channel->udma_stop(drive);
+ return ret;
}

/*
@@ -766,9 +745,12 @@
*/
static inline ide_startstop_t udma_init(struct ata_device *drive, struct request *rq)
{
- int ret = drive->channel->udma_init(drive, rq);
- if (ret == ide_started)
- set_bit(IDE_DMA, drive->channel->active);
+ int ret;
+
+ set_bit(IDE_DMA, drive->channel->active);
+ ret = drive->channel->udma_init(drive, rq);
+ if (ret != ide_started)
+ clear_bit(IDE_DMA, drive->channel->active);

return ret;
}
\
 
 \ /
  Last update: 2005-03-22 13:27    [W:0.130 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site