lkml.org 
[lkml]   [2002]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectFW: netgear ga621
Date

Hello

> I have got trouble with netgear ga621. I am running redhat 7.3 which the
> kernel version is 2.4.18-3. I successfully compiled driver provided by
> netgear, but could not get card works. I used the following command to
> load the driver[1]:
> [1]:
> # insmod gam.o
>
> Then, I have got link LED on the card goes off, and /var/log/message only
> shows the following message[2]:
> [2]:
> Jun 22 07:37:51 AN131 kernel: NETGEAR GA621 Gigabit Fiber Adapter Driver,
> version 1.02, May 15 2001, linux 2.4.x kernel
> Jun 22 07:37:51 AN131 kernel:
> Jun 22 07:37:51 AN131 kernel: NETGEAR GA621 Gigabit Fiber Adapter : eth1
> Jun 22 07:37:51 AN131 kernel:
> Jun 22 07:37:51 AN131 kernel: NETGEAR GA621 Gigabit Fiber Adapter : eth2
>
> I have also used the command to active the card[3]:
> [3]:
> # ifconfig eth1 10.2.2.2
>
> log/message does not do any changes, and link LED is still off.
>
Anyone can tell me how to make this card works.
> * what's the configuration I need to do to make this card works,
> * which configuration points I can check,
> * what's the proper log message I should see if the card works ok.
>
> Thank you in advance for your help.
>
> Regards,
> Yan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:26    [W:0.030 / U:1.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site