lkml.org 
[lkml]   [2002]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH} 2.5.19 IDE 79
Sat Jun  1 21:31:47 CEST 2002 ide-clean-79

- Fix typo in sparc_v9 code, in ns87415, just introduced.

- Eliminate unnecessary struct hd_drive_hob_hdr those are
in reality precisely the same registers as usual.

- Eliminate control_t, nowhere used type.

- Unfold ide_init_drive_cmd() at the places where it's used. This makes obvious
that REQ_DRIVE_CMD gets only used on the ioctl command path.

diff -urN linux-2.5.19/drivers/ide/device.c linux/drivers/ide/device.c
--- linux-2.5.19/drivers/ide/device.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/device.c 2002-06-01 22:14:42.000000000 +0200
@@ -142,4 +142,18 @@

EXPORT_SYMBOL(ata_reset);

+/*
+ * Output a complete register file.
+ */
+void ata_out_regfile(struct ata_device *drive, struct hd_drive_task_hdr *rf)
+{
+ struct ata_channel *ch = drive->channel;
+
+ OUT_BYTE(rf->feature, ch->io_ports[IDE_FEATURE_OFFSET]);
+ OUT_BYTE(rf->sector_count, ch->io_ports[IDE_NSECTOR_OFFSET]);
+ OUT_BYTE(rf->sector_number, ch->io_ports[IDE_SECTOR_OFFSET]);
+ OUT_BYTE(rf->low_cylinder, ch->io_ports[IDE_LCYL_OFFSET]);
+ OUT_BYTE(rf->high_cylinder, ch->io_ports[IDE_HCYL_OFFSET]);
+}
+
MODULE_LICENSE("GPL");
diff -urN linux-2.5.19/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.19/drivers/ide/ide.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-06-01 22:41:03.000000000 +0200
@@ -673,19 +673,6 @@
}

/*
- * Issue a simple drive command. The drive must be selected beforehand.
- */
-static void drive_cmd(struct ata_device *drive, u8 cmd, u8 nsect)
-{
- ide_set_handler(drive, drive_cmd_intr, WAIT_CMD, NULL);
- ata_irq_enable(drive, 1);
- ata_mask(drive);
- OUT_BYTE(nsect, IDE_NSECTOR_REG);
- OUT_BYTE(cmd, IDE_COMMAND_REG);
-}
-
-
-/*
* Busy-wait for the drive status to be not "busy". Check then the status for
* all of the "good" bits and none of the "bad" bits, and if all is okay it
* returns 0. All other cases return 1 after invoking error handler -- caller
@@ -815,21 +802,26 @@
#ifdef DEBUG
printk("%s: DRIVE_CMD ", drive->name);
printk("cmd=0x%02x ", args[0]);
- printk("sc=0x%02x ", args[1]);
- printk("fr=0x%02x ", args[2]);
- printk("xx=0x%02x\n", args[3]);
+ printk(" sc=0x%02x ", args[1]);
+ printk(" fr=0x%02x ", args[2]);
+ printk(" xx=0x%02x\n", args[3]);
#endif
+ ide_set_handler(drive, drive_cmd_intr, WAIT_CMD, NULL);
+ ata_irq_enable(drive, 1);
+ ata_mask(drive);
if (args[0] == WIN_SMART) {
- OUT_BYTE(0x4f, IDE_LCYL_REG);
- OUT_BYTE(0xc2, IDE_HCYL_REG);
- OUT_BYTE(args[2],IDE_FEATURE_REG);
- OUT_BYTE(args[1],IDE_SECTOR_REG);
- drive_cmd(drive, args[0], args[3]);
-
- return ide_started;
+ struct hd_drive_task_hdr regfile;
+ regfile.feature = args[2];
+ regfile.sector_count = args[3];
+ regfile.sector_number = args[1];
+ regfile.low_cylinder = 0x4f;
+ regfile.high_cylinder = 0xc2;
+ ata_out_regfile(drive, &regfile);
+ } else {
+ OUT_BYTE(args[2], IDE_FEATURE_REG);
+ OUT_BYTE(args[1], IDE_NSECTOR_REG);
}
- OUT_BYTE(args[2],IDE_FEATURE_REG);
- drive_cmd(drive, args[0], args[1]);
+ OUT_BYTE(args[0], IDE_COMMAND_REG);

return ide_started;
}
diff -urN linux-2.5.19/drivers/ide/ide-cd.c linux/drivers/ide/ide-cd.c
--- linux-2.5.19/drivers/ide/ide-cd.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/ide-cd.c 2002-06-01 23:48:30.000000000 +0200
@@ -535,7 +535,7 @@

/* stuff the sense request in front of our current request */
rq = &info->request_sense_request;
- ide_init_drive_cmd(rq);
+ memset(rq, 0, sizeof(*rq));
rq->cmd[0] = GPCMD_REQUEST_SENSE;
rq->cmd[4] = pc->buflen;
rq->flags = REQ_SENSE;
@@ -1389,9 +1389,8 @@

/* Start of retry loop. */
do {
- ide_init_drive_cmd(&rq);
+ memset(&rq, 0, sizeof(rq));
memcpy(rq.cmd, cmd, CDROM_PACKET_SIZE);
-
rq.flags = REQ_PC;

/* FIXME --mdcki */
@@ -2276,7 +2275,7 @@
struct request req;
int ret;

- ide_init_drive_cmd(&req);
+ memset(&req, 0, sizeof(req));
req.flags = REQ_SPECIAL;
ret = ide_do_drive_cmd(drive, &req, ide_wait);

diff -urN linux-2.5.19/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.19/drivers/ide/ide-disk.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-06-01 21:53:07.000000000 +0200
@@ -264,8 +264,6 @@
args.hobfile.high_cylinder = (block >>= 8); /* hi lba */
args.hobfile.device_head = drive->select.all;

- args.hobfile.control = 0x80;
-
args.taskfile.command = get_command(drive, rq_data_dir(rq));

#ifdef DEBUG
@@ -728,7 +726,6 @@
args.hobfile.high_cylinder = (addr_req >>= 8);

args.hobfile.device_head = 0x40;
- args.hobfile.control = 0x80;

args.handler = task_no_data_intr;
/* submit command request */
diff -urN linux-2.5.19/drivers/ide/ide-floppy.c linux/drivers/ide/ide-floppy.c
--- linux-2.5.19/drivers/ide/ide-floppy.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/ide-floppy.c 2002-06-01 23:55:10.000000000 +0200
@@ -712,10 +712,10 @@
static void idefloppy_queue_pc_head(struct ata_device *drive,
struct atapi_packet_command *pc, struct request *rq)
{
- ide_init_drive_cmd (rq);
+ memset(rq, 0, sizeof(*rq));
+ rq->flags = IDEFLOPPY_RQ;
/* FIXME: --mdcki */
rq->buffer = (char *) pc;
- rq->flags = IDEFLOPPY_RQ;
(void) ide_do_drive_cmd (drive, rq, ide_preempt);
}

@@ -1065,10 +1065,10 @@
#endif

ata_irq_enable(drive, 1);
- OUT_BYTE (dma_ok ? 1:0,IDE_FEATURE_REG); /* Use PIO/DMA */
- OUT_BYTE (bcount.b.high,IDE_BCOUNTH_REG);
- OUT_BYTE (bcount.b.low,IDE_BCOUNTL_REG);
- OUT_BYTE (drive->select.all,IDE_SELECT_REG);
+ OUT_BYTE(dma_ok ? 1:0,IDE_FEATURE_REG); /* Use PIO/DMA */
+ OUT_BYTE(bcount.b.high,IDE_BCOUNTH_REG);
+ OUT_BYTE(bcount.b.low,IDE_BCOUNTL_REG);
+ OUT_BYTE(drive->select.all,IDE_SELECT_REG);

#ifdef CONFIG_BLK_DEV_IDEDMA
if (dma_ok) { /* Begin DMA, if necessary */
@@ -1271,11 +1271,12 @@
{
struct request rq;

- ide_init_drive_cmd (&rq);
+ memset(&rq, 0, sizeof(rq));
/* FIXME: --mdcki */
rq.buffer = (char *) pc;
rq.flags = IDEFLOPPY_RQ;
- return ide_do_drive_cmd (drive, &rq, ide_wait);
+
+ return ide_do_drive_cmd(drive, &rq, ide_wait);
}

/*
diff -urN linux-2.5.19/drivers/ide/ide-tape.c linux/drivers/ide/ide-tape.c
--- linux-2.5.19/drivers/ide/ide-tape.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/ide-tape.c 2002-06-01 23:43:22.000000000 +0200
@@ -1921,7 +1921,7 @@
*/
static void idetape_queue_pc_head(struct ata_device *drive, struct atapi_packet_command *pc, struct request *rq)
{
- ide_init_drive_cmd (rq);
+ memset(rq, 0, sizeof(*rq));
rq->buffer = (char *) pc;
rq->flags = IDETAPE_PC_RQ1;
ide_do_drive_cmd(drive, rq, ide_preempt);
@@ -3153,7 +3153,7 @@
{
struct request rq;

- ide_init_drive_cmd (&rq);
+ memset(&rq, 0, sizeof(rq));
/* FIXME: --mdcki */
rq.buffer = (char *) pc;
rq.flags = IDETAPE_PC_RQ1;
@@ -3414,17 +3414,17 @@
#if IDETAPE_DEBUG_LOG
if (tape->debug_level >= 2)
printk (KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd);
-#endif /* IDETAPE_DEBUG_LOG */
+#endif
#if IDETAPE_DEBUG_BUGS
if (idetape_pipeline_active (tape)) {
printk (KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n");
return (0);
}
-#endif /* IDETAPE_DEBUG_BUGS */
+#endif

- ide_init_drive_cmd (&rq);
- rq.bio = bio;
+ memset(&rq, 0, sizeof(rq));
rq.flags = cmd;
+ rq.bio = bio;
rq.sector = tape->first_frame_position;
rq.nr_sectors = rq.current_nr_sectors = blocks;
if (tape->onstream)
@@ -3472,7 +3472,7 @@
printk(KERN_INFO "ide-tape: %s: read back logical block %d, data %x %x %x %x\n", tape->name, logical_blk_num, *p++, *p++, *p++, *p++);
#endif
rq = &stage->rq;
- ide_init_drive_cmd (rq);
+ memset(rq, 0, sizeof(*rq));
rq->flags = IDETAPE_WRITE_RQ;
rq->sector = tape->first_frame_position;
rq->nr_sectors = rq->current_nr_sectors = tape->capabilities.ctl;
@@ -3748,7 +3748,7 @@
}
}
rq = &new_stage->rq;
- ide_init_drive_cmd (rq);
+ memset(rq, 0, sizeof(*rq));
rq->flags = IDETAPE_WRITE_RQ;
rq->sector = tape->first_frame_position; /* Doesn't actually matter - We always assume sequential access */
rq->nr_sectors = rq->current_nr_sectors = blocks;
@@ -3938,7 +3938,8 @@
}
if (tape->restart_speed_control_req)
idetape_restart_speed_control(drive);
- ide_init_drive_cmd (&rq);
+
+ memset(&rq, 0, sizeof(rq));
rq.flags = IDETAPE_READ_RQ;
rq.sector = tape->first_frame_position;
rq.nr_sectors = rq.current_nr_sectors = blocks;
diff -urN linux-2.5.19/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.19/drivers/ide/ide-taskfile.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/ide-taskfile.c 2002-06-01 23:59:07.000000000 +0200
@@ -314,7 +314,6 @@
struct ata_taskfile *args, struct request *rq)
{
struct hd_driveid *id = drive->id;
- u8 HIHI = (drive->addressing) ? 0xE0 : 0xEF;

/* (ks/hs): Moved to start, do not use for multiple out commands */
if (args->handler != task_mulout_intr) {
@@ -322,25 +321,16 @@
ata_mask(drive);
}

- if ((id->command_set_2 & 0x0400) &&
- (id->cfs_enable_2 & 0x0400) &&
- (drive->addressing == 1)) {
- OUT_BYTE(args->hobfile.feature, IDE_FEATURE_REG);
- OUT_BYTE(args->hobfile.sector_count, IDE_NSECTOR_REG);
- OUT_BYTE(args->hobfile.sector_number, IDE_SECTOR_REG);
- OUT_BYTE(args->hobfile.low_cylinder, IDE_LCYL_REG);
- OUT_BYTE(args->hobfile.high_cylinder, IDE_HCYL_REG);
- }
-
- OUT_BYTE(args->taskfile.feature, IDE_FEATURE_REG);
- OUT_BYTE(args->taskfile.sector_count, IDE_NSECTOR_REG);
- /* refers to number of sectors to transfer */
- OUT_BYTE(args->taskfile.sector_number, IDE_SECTOR_REG);
- /* refers to sector offset or start sector */
- OUT_BYTE(args->taskfile.low_cylinder, IDE_LCYL_REG);
- OUT_BYTE(args->taskfile.high_cylinder, IDE_HCYL_REG);
-
- OUT_BYTE((args->taskfile.device_head & HIHI) | drive->select.all, IDE_SELECT_REG);
+ if ((id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400) &&
+ (drive->addressing == 1))
+ ata_out_regfile(drive, &args->hobfile);
+
+ ata_out_regfile(drive, &args->taskfile);
+
+ {
+ u8 HIHI = (drive->addressing) ? 0xE0 : 0xEF;
+ OUT_BYTE((args->taskfile.device_head & HIHI) | drive->select.all, IDE_SELECT_REG);
+ }
if (args->handler != NULL) {

/* This is apparently supposed to reset the wait timeout for
@@ -361,8 +351,7 @@
} else {
/*
* FIXME: this is a gross hack, need to unify tcq dma proc and
- * regular dma proc -- basically split stuff that needs to act
- * on a request from things like ide_dma_check etc.
+ * regular dma proc.
*/

if (!drive->using_dma)
@@ -761,15 +750,6 @@
}

/*
- * This function is intended to be used prior to invoking ide_do_drive_cmd().
- */
-void ide_init_drive_cmd(struct request *rq)
-{
- memset(rq, 0, sizeof(*rq));
- rq->flags = REQ_DRIVE_CMD;
-}
-
-/*
* This function issues a special IDE device request onto the request queue.
*
* If action is ide_wait, then the rq is queued at the end of the request
@@ -849,139 +829,12 @@
return ide_do_drive_cmd(drive, &rq, ide_wait);
}

-/*
- * Implement generic ioctls invoked from userspace to imlpement specific
- * functionality.
- *
- * Unfortunately every single low level programm out there is using this
- * interface.
- */
-
-/*
- * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
- * 1 : Safe to update drive->id DMA registers.
- * 0 : OOPs not allowed.
- */
-static int set_transfer(struct ata_device *drive, struct ata_taskfile *args)
-{
- if ((args->taskfile.command == WIN_SETFEATURES) &&
- (args->taskfile.sector_number >= XFER_SW_DMA_0) &&
- (args->taskfile.feature == SETFEATURES_XFER) &&
- (drive->id->dma_ultra ||
- drive->id->dma_mword ||
- drive->id->dma_1word))
- return 1;
-
- return 0;
-}
-
-/*
- * Verify that we are doing an approved SETFEATURES_XFER with respect
- * to the hardware being able to support request. Since some hardware
- * can improperly report capabilties, we check to see if the host adapter
- * in combination with the device (usually a disk) properly detect
- * and acknowledge each end of the ribbon.
- */
-static int ata66_check(struct ata_device *drive, struct ata_taskfile *args)
-{
- if ((args->taskfile.command == WIN_SETFEATURES) &&
- (args->taskfile.sector_number > XFER_UDMA_2) &&
- (args->taskfile.feature == SETFEATURES_XFER)) {
- if (!drive->channel->udma_four) {
- printk("%s: Speed warnings UDMA 3/4/5 is not functional.\n", drive->channel->name);
- return 1;
- }
-#ifndef CONFIG_IDEDMA_IVB
- if ((drive->id->hw_config & 0x6000) == 0) {
-#else
- if (((drive->id->hw_config & 0x2000) == 0) ||
- ((drive->id->hw_config & 0x4000) == 0)) {
-#endif
- printk("%s: Speed warnings UDMA 3/4/5 is not functional.\n", drive->name);
- return 1;
- }
- }
- return 0;
-}
-
-int ide_cmd_ioctl(struct ata_device *drive, unsigned long arg)
-{
- int err = 0;
- u8 vals[4];
- u8 *argbuf = vals;
- u8 pio = 0;
- int argsize = 4;
- struct ata_taskfile args;
- struct request rq;
-
- ide_init_drive_cmd(&rq);
-
- /* Wait for drive ready.
- */
- if (!arg)
- return ide_do_drive_cmd(drive, &rq, ide_wait);
-
- /* Second phase.
- */
- if (copy_from_user(vals, (void *)arg, 4))
- return -EFAULT;
-
- args.taskfile.feature = vals[2];
- args.taskfile.sector_count = vals[3];
- args.taskfile.sector_number = vals[1];
- args.taskfile.low_cylinder = 0x00;
- args.taskfile.high_cylinder = 0x00;
- args.taskfile.device_head = 0x00;
- args.taskfile.command = vals[0];
-
- if (vals[3]) {
- argsize = 4 + (SECTOR_WORDS * 4 * vals[3]);
- argbuf = kmalloc(argsize, GFP_KERNEL);
- if (argbuf == NULL)
- return -ENOMEM;
- memcpy(argbuf, vals, 4);
- memset(argbuf + 4, 0, argsize - 4);
- }
-
- /* Always make sure the transfer reate has been setup.
- * FIXME: what about setting up the drive with ->tuneproc?
- */
- if (set_transfer(drive, &args)) {
- pio = vals[1];
- if (ata66_check(drive, &args))
- goto abort;
- }
-
- /* Issue ATA command and wait for completion.
- */
- rq.buffer = argbuf;
- err = ide_do_drive_cmd(drive, &rq, ide_wait);
-
- if (!err && pio) {
- /* active-retuning-calls future */
- /* FIXME: what about the setup for the drive?! */
- if (drive->channel->speedproc)
- drive->channel->speedproc(drive, pio);
- }
-
-abort:
- if (copy_to_user((void *)arg, argbuf, argsize))
- err = -EFAULT;
-
- if (argsize > 4)
- kfree(argbuf);
-
- return err;
-}
-
EXPORT_SYMBOL(drive_is_ready);
EXPORT_SYMBOL(ata_read);
EXPORT_SYMBOL(ata_write);
EXPORT_SYMBOL(ata_taskfile);
EXPORT_SYMBOL(recal_intr);
EXPORT_SYMBOL(task_no_data_intr);
-EXPORT_SYMBOL(ide_init_drive_cmd);
EXPORT_SYMBOL(ide_do_drive_cmd);
EXPORT_SYMBOL(ide_raw_taskfile);
EXPORT_SYMBOL(ide_cmd_type_parser);
-EXPORT_SYMBOL(ide_cmd_ioctl);
diff -urN linux-2.5.19/drivers/ide/ioctl.c linux/drivers/ide/ioctl.c
--- linux-2.5.19/drivers/ide/ioctl.c 2002-05-29 20:42:50.000000000 +0200
+++ linux/drivers/ide/ioctl.c 2002-06-02 00:03:22.000000000 +0200
@@ -33,6 +33,119 @@
#include "ioctl.h"

/*
+ * Implement generic ioctls invoked from userspace to imlpement specific
+ * functionality.
+ *
+ * Unfortunately every single low level programm out there is using this
+ * interface.
+ */
+static int cmd_ioctl(struct ata_device *drive, unsigned long arg)
+{
+ int err = 0;
+ u8 vals[4];
+ u8 *argbuf = vals;
+ u8 pio = 0;
+ int argsize = 4;
+ struct ata_taskfile args;
+ struct request rq;
+
+ memset(&rq, 0, sizeof(rq));
+ rq.flags = REQ_DRIVE_CMD;
+
+ /* If empty parameter file - wait for drive ready.
+ */
+ if (!arg)
+ return ide_do_drive_cmd(drive, &rq, ide_wait);
+
+ /* Second phase.
+ */
+ if (copy_from_user(vals, (void *)arg, 4))
+ return -EFAULT;
+
+ args.taskfile.feature = vals[2];
+ args.taskfile.sector_count = vals[3];
+ args.taskfile.sector_number = vals[1];
+ args.taskfile.low_cylinder = 0x00;
+ args.taskfile.high_cylinder = 0x00;
+ args.taskfile.device_head = 0x00;
+ args.taskfile.command = vals[0];
+
+ if (vals[3]) {
+ argsize = 4 + (SECTOR_WORDS * 4 * vals[3]);
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL)
+ return -ENOMEM;
+ memcpy(argbuf, vals, 4);
+ memset(argbuf + 4, 0, argsize - 4);
+ }
+
+ /*
+ * Always make sure the transfer reate has been setup.
+ *
+ * FIXME: what about setting up the drive with ->tuneproc?
+ *
+ * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
+ * 1 : Safe to update drive->id DMA registers.
+ * 0 : OOPs not allowed.
+ */
+ if ((args.taskfile.command == WIN_SETFEATURES) &&
+ (args.taskfile.sector_number >= XFER_SW_DMA_0) &&
+ (args.taskfile.feature == SETFEATURES_XFER) &&
+ (drive->id->dma_ultra ||
+ drive->id->dma_mword ||
+ drive->id->dma_1word)) {
+ pio = vals[1];
+ /*
+ * Verify that we are doing an approved SETFEATURES_XFER with
+ * respect to the hardware being able to support request.
+ * Since some hardware can improperly report capabilties, we
+ * check to see if the host adapter in combination with the
+ * device (usually a disk) properly detect and acknowledge each
+ * end of the ribbon.
+ */
+ if (args.taskfile.sector_number > XFER_UDMA_2) {
+ if (!drive->channel->udma_four) {
+ printk(KERN_WARNING "%s: Speed warnings UDMA > 2 is not functional.\n",
+ drive->channel->name);
+ goto abort;
+ }
+#ifndef CONFIG_IDEDMA_IVB
+ if (!(drive->id->hw_config & 0x6000))
+#else
+ if (!(drive->id->hw_config & 0x2000) ||
+ !(drive->id->hw_config & 0x4000))
+#endif
+ {
+ printk(KERN_WARNING "%s: Speed warnings UDMA > 2 is not functional.\n",
+ drive->name);
+ goto abort;
+ }
+ }
+ }
+
+ /* Issue ATA command and wait for completion.
+ */
+ rq.buffer = argbuf;
+ err = ide_do_drive_cmd(drive, &rq, ide_wait);
+
+ if (!err && pio) {
+ /* active-retuning-calls future */
+ /* FIXME: what about the setup for the drive?! */
+ if (drive->channel->speedproc)
+ drive->channel->speedproc(drive, pio);
+ }
+
+abort:
+ if (copy_to_user((void *)arg, argbuf, argsize))
+ err = -EFAULT;
+
+ if (argsize > 4)
+ kfree(argbuf);
+
+ return err;
+}
+
+/*
* NOTE: Due to ridiculous coding habbits in the hdparm utility we have to
* always return unsigned long in case we are returning simple values.
*/
@@ -40,7 +153,7 @@
{
unsigned int major, minor;
struct ata_device *drive;
- struct request rq;
+// struct request rq;
kdev_t dev;

dev = inode->i_rdev;
@@ -50,7 +163,6 @@
if ((drive = get_info_ptr(inode->i_rdev)) == NULL)
return -ENODEV;

-
/* Contrary to popular beleve we disallow even the reading of the ioctl
* values for users which don't have permission too. We do this becouse
* such information could be used by an attacker to deply a simple-user
@@ -61,7 +173,6 @@
if (!capable(CAP_SYS_ADMIN))
return -EACCES;

- ide_init_drive_cmd(&rq);
switch (cmd) {
case HDIO_GET_32BIT: {
unsigned long val = drive->channel->io_32bit;
@@ -96,7 +207,6 @@
/* FIXME: we can see that tuneproc whould do the
* locking!.
*/
-
if (ide_spin_wait_hwgroup(drive))
return -EBUSY;

@@ -114,7 +224,6 @@
return 0;
}

-
case HDIO_SET_UNMASKINTR:
if (arg < 0 || arg > 1)
return -EINVAL;
@@ -202,9 +311,6 @@
return 0;
}

- case BLKRRPART: /* Re-read partition tables */
- return ata_revalidate(inode->i_rdev);
-
case HDIO_GET_IDENTITY:
if (minor(inode->i_rdev) & PARTN_MASK)
return -EINVAL;
@@ -222,12 +328,6 @@
drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP,
(long *) arg);

- case HDIO_DRIVE_CMD:
- if (!capable(CAP_SYS_RAWIO))
- return -EACCES;
-
- return ide_cmd_ioctl(drive, arg);
-
case HDIO_SET_NICE:
if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP))))
return -EPERM;
@@ -241,6 +341,34 @@

return 0;

+ case HDIO_GET_BUSSTATE:
+ if (put_user(drive->channel->bus_state, (long *)arg))
+ return -EFAULT;
+
+ return 0;
+
+ case HDIO_SET_BUSSTATE:
+ if (drive->channel->busproc)
+ drive->channel->busproc(drive, (int)arg);
+
+ return 0;
+
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_RAWIO))
+ return -EACCES;
+
+ return cmd_ioctl(drive, arg);
+
+ /*
+ * uniform packet command handling
+ */
+ case CDROMEJECT:
+ case CDROMCLOSETRAY:
+ return block_ioctl(inode->i_bdev, cmd, arg);
+
+ case BLKRRPART: /* Re-read partition tables */
+ return ata_revalidate(inode->i_rdev);
+
case BLKGETSIZE:
case BLKGETSIZE64:
case BLKROSET:
@@ -254,25 +382,6 @@
case BLKBSZSET:
return blk_ioctl(inode->i_bdev, cmd, arg);

- /*
- * uniform packet command handling
- */
- case CDROMEJECT:
- case CDROMCLOSETRAY:
- return block_ioctl(inode->i_bdev, cmd, arg);
-
- case HDIO_GET_BUSSTATE:
- if (put_user(drive->channel->bus_state, (long *)arg))
- return -EFAULT;
-
- return 0;
-
- case HDIO_SET_BUSSTATE:
- if (drive->channel->busproc)
- drive->channel->busproc(drive, (int)arg);
-
- return 0;
-
/* Now check whatever this particular ioctl has a device type
* specific implementation.
*/
diff -urN linux-2.5.19/drivers/ide/ns87415.c linux/drivers/ide/ns87415.c
--- linux-2.5.19/drivers/ide/ns87415.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/ide/ns87415.c 2002-06-01 21:32:31.000000000 +0200
@@ -193,7 +193,7 @@
* XXX: Reset the device, if we don't it will not respond
* to select properly during first probe.
*/
- ata_reset(struct ata_channel *hwif);
+ ata_reset(hwif);
#endif
}

diff -urN linux-2.5.19/drivers/scsi/ide-scsi.c linux/drivers/scsi/ide-scsi.c
--- linux-2.5.19/drivers/scsi/ide-scsi.c 2002-06-01 23:17:28.000000000 +0200
+++ linux/drivers/scsi/ide-scsi.c 2002-06-01 23:39:24.000000000 +0200
@@ -412,9 +412,9 @@

ata_select(drive, 10);
ata_irq_enable(drive, 1);
- OUT_BYTE (dma_ok,IDE_FEATURE_REG);
- OUT_BYTE (bcount >> 8,IDE_BCOUNTH_REG);
- OUT_BYTE (bcount & 0xff,IDE_BCOUNTL_REG);
+ OUT_BYTE(dma_ok,IDE_FEATURE_REG);
+ OUT_BYTE(bcount >> 8,IDE_BCOUNTH_REG);
+ OUT_BYTE(bcount & 0xff,IDE_BCOUNTL_REG);

if (dma_ok) {
set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
@@ -662,17 +662,20 @@
}
}

- ide_init_drive_cmd (rq);
+ memset(rq, 0, sizeof(*rq));
+ rq->flags = REQ_SPECIAL;
rq->special = (char *) pc;
rq->bio = idescsi_dma_bio (drive, pc);
- rq->flags = REQ_SPECIAL;
spin_unlock_irq(cmd->host->host_lock);
- (void) ide_do_drive_cmd (drive, rq, ide_end);
+ ide_do_drive_cmd (drive, rq, ide_end);
spin_lock_irq(cmd->host->host_lock);
+
return 0;
abort:
- if (pc) kfree (pc);
- if (rq) kfree (rq);
+ if (pc)
+ kfree (pc);
+ if (rq)
+ kfree (rq);
cmd->result = DID_ERROR << 16;
done(cmd);

diff -urN linux-2.5.19/include/linux/hdreg.h linux/include/linux/hdreg.h
--- linux-2.5.19/include/linux/hdreg.h 2002-05-29 20:42:54.000000000 +0200
+++ linux/include/linux/hdreg.h 2002-06-01 22:45:05.000000000 +0200
@@ -81,18 +81,9 @@
u8 low_cylinder;
u8 high_cylinder;
u8 device_head;
- u8 command;
-} __attribute__((packed));

-struct hd_drive_hob_hdr {
- u8 data;
- u8 feature;
- u8 sector_count;
- u8 sector_number;
- u8 low_cylinder;
- u8 high_cylinder;
- u8 device_head;
- u8 control;
+ /* FXIME: Consider moving this out from here. */
+ u8 command;
} __attribute__((packed));

/*
diff -urN linux-2.5.19/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.19/include/linux/ide.h 2002-06-01 23:17:29.000000000 +0200
+++ linux/include/linux/ide.h 2002-06-01 23:58:26.000000000 +0200
@@ -253,11 +253,11 @@
unsigned all : 8; /* all of the bits together */
struct {
#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned head : 4; /* always zeros here */
+ unsigned XXX_head : 4; /* always zeros here */
unsigned unit : 1; /* drive select number: 0/1 */
- unsigned bit5 : 1; /* always 1 */
+ unsigned XXX_bit5 : 1; /* always 1 */
unsigned lba : 1; /* using LBA instead of CHS */
- unsigned bit7 : 1; /* always 1 */
+ unsigned XXX_bit7 : 1; /* always 1 */
#elif defined(__BIG_ENDIAN_BITFIELD)
unsigned bit7 : 1;
unsigned lba : 1;
@@ -270,29 +270,6 @@
} b;
} select_t;

-typedef union {
- unsigned all : 8; /* all of the bits together */
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned bit0 : 1;
- unsigned nIEN : 1; /* device INTRQ to host */
- unsigned SRST : 1; /* host soft reset bit */
- unsigned bit3 : 1; /* ATA-2 thingy */
- unsigned reserved456 : 3;
- unsigned HOB : 1; /* 48-bit address ordering */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned HOB : 1;
- unsigned reserved456 : 3;
- unsigned bit3 : 1;
- unsigned SRST : 1;
- unsigned nIEN : 1;
- unsigned bit0 : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } b;
-} control_t;
-
/*
* ATA/ATAPI device structure :
*/
@@ -530,7 +507,7 @@
* Register new hardware with ide
*/
extern int ide_register_hw(hw_regs_t *hw);
-extern void ide_unregister(struct ata_channel *hwif);
+extern void ide_unregister(struct ata_channel *);

struct ata_taskfile;

@@ -671,11 +648,6 @@
ide_startstop_t restart_request(struct ata_device *);

/*
- * This function is intended to be used prior to invoking ide_do_drive_cmd().
- */
-extern void ide_init_drive_cmd(struct request *rq);
-
-/*
* "action" parameter type for ide_do_drive_cmd() below.
*/
typedef enum {
@@ -698,7 +670,7 @@

struct ata_taskfile {
struct hd_drive_task_hdr taskfile;
- struct hd_drive_hob_hdr hobfile;
+ struct hd_drive_task_hdr hobfile;
int command_type;
ide_startstop_t (*prehandler)(struct ata_device *, struct request *);
ide_startstop_t (*handler)(struct ata_device *, struct request *);
@@ -717,21 +689,18 @@
extern ide_startstop_t recal_intr(struct ata_device *, struct request *);
extern ide_startstop_t task_no_data_intr(struct ata_device *, struct request *);

-
-/* This is setting up all fields in args, which depend upon the command type.
- */
extern void ide_cmd_type_parser(struct ata_taskfile *args);
extern int ide_raw_taskfile(struct ata_device *, struct ata_taskfile *);
-extern int ide_cmd_ioctl(struct ata_device *drive, unsigned long arg);

extern void ide_fix_driveid(struct hd_driveid *id);
extern int ide_config_drive_speed(struct ata_device *, byte);
extern byte eighty_ninty_three(struct ata_device *);

-extern int system_bus_speed;

extern void ide_stall_queue(struct ata_device *, unsigned long);

+extern int system_bus_speed;
+
/*
* CompactFlash cards and their brethern pretend to be removable hard disks,
* but they never have a slave unit, and they don't have doorlock mechanisms.
@@ -873,5 +842,6 @@
extern int ata_status(struct ata_device *, u8, u8);
extern int ata_irq_enable(struct ata_device *, int);
extern void ata_reset(struct ata_channel *);
+extern void ata_out_regfile(struct ata_device *, struct hd_drive_task_hdr *);

#endif
\
 
 \ /
  Last update: 2005-03-22 13:26    [from the cache]
©2003-2011 Jasper Spaans