[lkml]   [2002]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subjectraid 0+1 issue
Dear all,

I find the raidtools-1 (comes with Redhat 7.3) doesn't allow you to run
raid 0+1. Here is the problem .

I have 2 raid 0 devices /dev/md2 /dev/md3 and then I run raid 1 ontop of
these raid 0 devices (/dev/md4).

The md2 and md3 sucessfully started, but when come to md4 raidstart
always return "invalid argument" . The point is that the partition has
already initialised, but if you run "raidstop /dev/md4" and then it
cannot start again. If you run "'mkraid /dev/md4" it will initialise the
raid and start automatically, that means there are some problems that
the "raidstart" command does not allow raidstart on md devices but the
mkraid allows you to do that. If anyone have experience please comment
and advice. Thanks.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:26    [W:0.023 / U:4.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site