[lkml]   [2002]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 3c59x: LK1.1.17 gives No MII transceivers found
>>>>> "Andrew" == Andrew Morton <> writes:

Andrew> Kees Bakker wrote:
>> In 2.5.8 there was an update of the 3c59x driver. I have two NICs,
>> both use this driver, a 3c900 Boomerang and a 3c905C Tornado.
>> Linux 2.4.17 and 2.5.7 both report
>> 00:08.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0xd400. Vers LK1.1.16
>> 00:09.0: 3Com PCI 3c905C Tornado at 0xd000. Vers LK1.1.16
>> However, the new driver produces:
>> 00:08.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0xd400. Vers LK1.1.17
>> phy=0, phyx=24, mii_status=0xffff
>> phy=1, phyx=0, mii_status=0xffff

Andrew> It's just random debug code.

Is that also true for the "***WARNING*** No MII transceivers found!"

Andrew> Does the 3c900 actually work correctly?

I can't tell, because since it hangs at boot. That is, every kernel after
2.5.7 that I could build, including 2.5.13. (I'm having those hda: lost
interrupt messages).
Kees Bakker
Senior Software Designer
Altium - Think it, Design it, Build it
Phone : +31 33 455 8584
Fax : +31 33 455 5503
E-Mail :
English is wonderful, used correctly
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:25    [W:0.057 / U:41.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site