lkml.org 
[lkml]   [2002]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] 2.5.13 IDE 51
Fri May  3 17:19:41 CEST 2002 ide-clean-51

Synchronize with Jens. Applying tons of janitorian stuff to his TCQ code.
Making functions static where appropriate and so on... Marking the config entry
for it experimental and so on. His changelog follows:

2.5.13 now has the generic tag support that I wrote included, here's an
IDE TCQ that uses that. Changes since the version posted for 2.5.12:

- Fix the ide_tcq_invalidate_queue() WIN_NOP usage needed to clear the
internal queue on errors. It was disabled in the last version due to
the ata_request changes, it should work now.

- Remove Promise tcq disable check, it works just fine on Promise as
long as we handle the two-drives-with-tcq case like we currently do.

That's about it, code should be solid.
diff -urN linux-2.5.13/drivers/ide/Config.help linux/drivers/ide/Config.help
--- linux-2.5.13/drivers/ide/Config.help 2002-05-03 02:22:56.000000000 +0200
+++ linux/drivers/ide/Config.help 2002-05-03 16:09:15.000000000 +0200
@@ -751,6 +751,37 @@

Generally say N here.

+CONFIG_BLK_DEV_IDE_TCQ
+ Support for tagged command queueing on ATA disk drives. This enables
+ the IDE layer to have multiple in-flight requests on hardware that
+ supports it. For now this includes the IBM Deskstar series drives,
+ such as the 22GXP, 75GXP, 40GV, 60GXP, and 120GXP (ie any Deskstar made
+ in the last couple of years), and at least some of the Western
+ Digital drives in the Expert series (by nature of really being IBM
+ drives).
+
+ If you have such a drive, say Y here.
+
+CONFIG_BLK_DEV_IDE_TCQ_DEPTH
+ Maximum size of commands to enable per-drive. Any value between 1
+ and 32 is valid, with 32 being the maxium that the hardware supports.
+
+ You probably just want the default of 32 here. If you enter an invalid
+ number, the default value will be used.
+
+CONFIG_BLK_DEV_IDE_TCQ_DEFAULT
+ Enabled tagged command queueing unconditionally on drives that report
+ support for it. Regardless of the chosen value here, tagging can be
+ controlled at run time:
+
+ echo "using_tcq:32" > /proc/ide/hdX/settings
+
+ where any value between 1-32 selects chosen queue depth and enables
+ TCQ, and 0 disables it. hdparm version 4.7 an above also support
+ TCQ manipulations.
+
+ Generally say Y here.
+
CONFIG_BLK_DEV_IT8172
Say Y here to support the on-board IDE controller on the Integrated
Technology Express, Inc. ITE8172 SBC. Vendor page at
diff -urN linux-2.5.13/drivers/ide/Config.in linux/drivers/ide/Config.in
--- linux-2.5.13/drivers/ide/Config.in 2002-05-03 02:22:56.000000000 +0200
+++ linux/drivers/ide/Config.in 2002-05-03 17:10:12.000000000 +0200
@@ -47,6 +47,11 @@
dep_bool ' Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' ATA tagged command queueing (EXPERIMENTAL)' CONFIG_BLK_DEV_IDE_TCQ $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
+ dep_bool ' TCQ on by default' CONFIG_BLK_DEV_IDE_TCQ_DEFAULT $CONFIG_BLK_DEV_IDE_TCQ
+ if [ "$CONFIG_BLK_DEV_IDE_TCQ" != "n" ]; then
+ int ' Default queue depth' CONFIG_BLK_DEV_IDE_TCQ_DEPTH 32
+ fi
dep_bool ' Good-Bad DMA Model-Firmware (EXPERIMENTAL)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_EXPERIMENTAL
dep_bool ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' AEC62XX Tuning support' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX
diff -urN linux-2.5.13/drivers/ide/hpt366.c linux/drivers/ide/hpt366.c
--- linux-2.5.13/drivers/ide/hpt366.c 2002-05-03 02:22:42.000000000 +0200
+++ linux/drivers/ide/hpt366.c 2002-05-03 16:53:22.000000000 +0200
@@ -346,8 +346,6 @@
static unsigned int pci_rev_check_hpt3xx(struct pci_dev *dev);
static unsigned int pci_rev2_check_hpt3xx(struct pci_dev *dev);
byte hpt366_proc = 0;
-byte hpt363_shared_irq;
-byte hpt363_shared_pin;
extern char *ide_xfer_verbose (byte xfer_rate);

#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
diff -urN linux-2.5.13/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.13/drivers/ide/ide.c 2002-05-03 16:09:02.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-05-03 16:09:15.000000000 +0200
@@ -311,7 +311,10 @@

if (!end_that_request_first(rq, uptodate, nr_secs)) {
add_blkdev_randomness(major(rq->rq_dev));
- blkdev_dequeue_request(rq);
+ if (!blk_rq_tagged(rq))
+ blkdev_dequeue_request(rq);
+ else
+ blk_queue_end_tag(&drive->queue, rq);
HWGROUP(drive)->rq = NULL;
end_that_request_last(rq);
ret = 0;
@@ -1219,11 +1222,6 @@
}


-/* Place holders for later expansion of functionality.
- */
-#define ata_pending_commands(drive) (0)
-#define ata_can_queue(drive) (1)
-
/*
* Feed commands to a drive until it barfs. Called with ide_lock/DRIVE_LOCK
* held and busy channel.
@@ -1263,7 +1261,7 @@
* still a severe BUG!
*/
if (blk_queue_plugged(&drive->queue)) {
- BUG();
+ BUG_ON(!drive->using_tcq);
break;
}

@@ -1675,7 +1673,8 @@
} else {
printk("%s: %s: huh? expected NULL handler on exit\n", drive->name, __FUNCTION__);
}
- }
+ } else if (startstop == ide_released)
+ queue_commands(drive, ch->irq);

out_lock:
spin_unlock_irqrestore(&ide_lock, flags);
@@ -3204,6 +3203,9 @@

drive->channel->udma(ide_dma_off_quietly, drive, NULL);
drive->channel->udma(ide_dma_check, drive, NULL);
+#ifdef CONFIG_BLK_DEV_IDE_TCQ_DEFAULT
+ drive->channel->udma(ide_dma_queued_on, drive, NULL);
+#endif
}

/* Only CD-ROMs and tape drives support DSC overlap. But only
diff -urN linux-2.5.13/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.13/drivers/ide/ide-disk.c 2002-05-03 16:09:02.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-05-03 16:09:15.000000000 +0200
@@ -99,6 +99,8 @@

if (lba48bit) {
if (cmd == READ) {
+ if (drive->using_tcq)
+ return WIN_READDMA_QUEUED_EXT;
if (drive->using_dma)
return WIN_READDMA_EXT;
else if (drive->mult_count)
@@ -106,6 +108,8 @@
else
return WIN_READ_EXT;
} else if (cmd == WRITE) {
+ if (drive->using_tcq)
+ return WIN_WRITEDMA_QUEUED_EXT;
if (drive->using_dma)
return WIN_WRITEDMA_EXT;
else if (drive->mult_count)
@@ -115,6 +119,8 @@
}
} else {
if (cmd == READ) {
+ if (drive->using_tcq)
+ return WIN_READDMA_QUEUED;
if (drive->using_dma)
return WIN_READDMA;
else if (drive->mult_count)
@@ -122,6 +128,8 @@
else
return WIN_READ;
} else if (cmd == WRITE) {
+ if (drive->using_tcq)
+ return WIN_WRITEDMA_QUEUED;
if (drive->using_dma)
return WIN_WRITEDMA;
else if (drive->mult_count)
@@ -149,7 +157,11 @@

memset(&args, 0, sizeof(args));

- args.taskfile.sector_count = sectors;
+ if (blk_rq_tagged(rq)) {
+ args.taskfile.feature = sectors;
+ args.taskfile.sector_count = rq->tag << 3;
+ } else
+ args.taskfile.sector_count = sectors;

args.taskfile.sector_number = sect;
args.taskfile.low_cylinder = cyl;
@@ -185,7 +197,12 @@

memset(&args, 0, sizeof(args));

- args.taskfile.sector_count = sectors;
+ if (blk_rq_tagged(rq)) {
+ args.taskfile.feature = sectors;
+ args.taskfile.sector_count = rq->tag << 3;
+ } else
+ args.taskfile.sector_count = sectors;
+
args.taskfile.sector_number = block;
args.taskfile.low_cylinder = (block >>= 8);

@@ -227,8 +244,14 @@

memset(&args, 0, sizeof(args));

- args.taskfile.sector_count = sectors;
- args.hobfile.sector_count = sectors >> 8;
+ if (blk_rq_tagged(rq)) {
+ args.taskfile.feature = sectors;
+ args.hobfile.feature = sectors >> 8;
+ args.taskfile.sector_count = rq->tag << 3;
+ } else {
+ args.taskfile.sector_count = sectors;
+ args.hobfile.sector_count = sectors >> 8;
+ }

args.taskfile.sector_number = block; /* low lba */
args.taskfile.low_cylinder = (block >>= 8); /* mid lba */
@@ -286,6 +309,30 @@
return promise_rw_disk(drive, rq, block);
}

+ /*
+ * start a tagged operation
+ */
+ if (drive->using_tcq) {
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ ret = blk_queue_start_tag(&drive->queue, rq);
+
+ if (ata_pending_commands(drive) > drive->max_depth)
+ drive->max_depth = ata_pending_commands(drive);
+ if (ata_pending_commands(drive) > drive->max_last_depth)
+ drive->max_last_depth = ata_pending_commands(drive);
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+
+ if (ret) {
+ BUG_ON(!ata_pending_commands(drive));
+ return ide_started;
+ }
+ }
+
/* 48-bit LBA */
if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing))
return lba48_do_request(drive, rq, block);
@@ -543,11 +590,61 @@
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
}

+#ifdef CONFIG_BLK_DEV_IDE_TCQ
+static int proc_idedisk_read_tcq
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ ide_drive_t *drive = (ide_drive_t *) data;
+ char *out = page;
+ int len, cmds, i;
+ unsigned long flags;
+
+ if (!blk_queue_tagged(&drive->queue)) {
+ len = sprintf(out, "not configured\n");
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+ }
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ len = sprintf(out, "TCQ currently on:\t%s\n", drive->using_tcq ? "yes" : "no");
+ len += sprintf(out+len, "Max queue depth:\t%d\n",drive->queue_depth);
+ len += sprintf(out+len, "Max achieved depth:\t%d\n",drive->max_depth);
+ len += sprintf(out+len, "Max depth since last:\t%d\n",drive->max_last_depth);
+ len += sprintf(out+len, "Current depth:\t\t%d\n", ata_pending_commands(drive));
+ len += sprintf(out+len, "Active tags:\t\t[ ");
+ for (i = 0, cmds = 0; i < drive->queue_depth; i++) {
+ struct request *rq = blk_queue_tag_request(&drive->queue, i);
+
+ if (!rq)
+ continue;
+
+ len += sprintf(out+len, "%d, ", i);
+ cmds++;
+ }
+ len += sprintf(out+len, "]\n");
+
+ len += sprintf(out+len, "Queue:\t\t\treleased [ %lu ] - started [ %lu ]\n", drive->immed_rel, drive->immed_comp);
+
+ if (ata_pending_commands(drive) != cmds)
+ len += sprintf(out+len, "pending request and queue count mismatch (counted: %d)\n", cmds);
+
+ len += sprintf(out+len, "DMA status:\t\t%srunning\n", test_bit(IDE_DMA, &HWGROUP(drive)->flags) ? "" : "not ");
+
+ drive->max_last_depth = 0;
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+#endif
+
static ide_proc_entry_t idedisk_proc[] = {
{ "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
{ "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
{ "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_smart_values, NULL },
{ "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL },
+#ifdef CONFIG_BLK_DEV_IDE_TCQ
+ { "tcq", S_IFREG|S_IRUSR, proc_idedisk_read_tcq, NULL },
+#endif
{ NULL, 0, NULL, NULL }
};

@@ -634,6 +731,32 @@
return 0;
}

+#ifdef CONFIG_BLK_DEV_IDE_TCQ
+static int set_using_tcq(ide_drive_t *drive, int arg)
+{
+ if (!drive->driver)
+ return -EPERM;
+ if (!drive->channel->udma)
+ return -EPERM;
+ if (arg == drive->queue_depth && drive->using_tcq)
+ return 0;
+
+ /*
+ * set depth, but check also id for max supported depth
+ */
+ drive->queue_depth = arg ? arg : 1;
+ if (drive->id) {
+ if (drive->queue_depth > drive->id->queue_depth + 1)
+ drive->queue_depth = drive->id->queue_depth + 1;
+ }
+
+ if (drive->channel->udma(arg ? ide_dma_queued_on : ide_dma_queued_off, drive, NULL))
+ return -EIO;
+
+ return 0;
+}
+#endif
+
static int probe_lba_addressing (ide_drive_t *drive, int arg)
{
drive->addressing = 0;
@@ -665,6 +788,9 @@
ide_add_setting(drive, "acoustic", SETTING_RW, HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic);
ide_add_setting(drive, "failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL);
ide_add_setting(drive, "max_failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL);
+#ifdef CONFIG_BLK_DEV_IDE_TCQ
+ ide_add_setting(drive, "using_tcq", SETTING_RW, HDIO_GET_QDMA, HDIO_SET_QDMA, TYPE_BYTE, 0, IDE_MAX_TAG, 1, 1, &drive->using_tcq, set_using_tcq);
+#endif
}

static int idedisk_suspend(struct device *dev, u32 state, u32 level)
diff -urN linux-2.5.13/drivers/ide/ide-dma.c linux/drivers/ide/ide-dma.c
--- linux-2.5.13/drivers/ide/ide-dma.c 2002-05-03 02:22:44.000000000 +0200
+++ linux/drivers/ide/ide-dma.c 2002-05-03 16:09:15.000000000 +0200
@@ -522,6 +522,32 @@
blk_queue_bounce_limit(&drive->queue, addr);
}

+int ide_start_dma(ide_dma_action_t func, struct ata_device *drive)
+{
+ struct ata_channel *hwif = drive->channel;
+ unsigned long dma_base = hwif->dma_base;
+ unsigned int reading = 0;
+
+ if (rq_data_dir(HWGROUP(drive)->rq) == READ)
+ reading = 1 << 3;
+
+ /* active tuning based on IO direction */
+ if (hwif->rwproc)
+ hwif->rwproc(drive, func);
+
+ /*
+ * try PIO instead of DMA
+ */
+ if (!ide_build_dmatable(drive, func))
+ return 1;
+
+ outl(hwif->dmatable_dma, dma_base + 4); /* PRD table */
+ outb(reading, dma_base); /* specify r/w */
+ outb(inb(dma_base+2)|6, dma_base+2); /* clear INTR & ERROR flags */
+ drive->waiting_for_dma = 1;
+ return 0;
+}
+
/*
* This initiates/aborts DMA read/write operations on a drive.
*
@@ -543,7 +569,7 @@
struct ata_channel *hwif = drive->channel;
unsigned long dma_base = hwif->dma_base;
byte unit = (drive->select.b.unit & 0x01);
- unsigned int count, reading = 0, set_high = 1;
+ unsigned int reading = 0, set_high = 1;
byte dma_stat;

switch (func) {
@@ -552,27 +578,27 @@
case ide_dma_off_quietly:
set_high = 0;
outb(inb(dma_base+2) & ~(1<<(5+unit)), dma_base+2);
+#ifdef CONFIG_BLK_DEV_IDE_TCQ
+ hwif->udma(ide_dma_queued_off, drive, rq);
+#endif
case ide_dma_on:
ide_toggle_bounce(drive, set_high);
drive->using_dma = (func == ide_dma_on);
- if (drive->using_dma)
+ if (drive->using_dma) {
outb(inb(dma_base+2)|(1<<(5+unit)), dma_base+2);
+#ifdef CONFIG_BLK_DEV_IDE_TCQ_DEFAULT
+ hwif->udma(ide_dma_queued_on, drive, rq);
+#endif
+ }
return 0;
case ide_dma_check:
return config_drive_for_dma (drive);
case ide_dma_read:
reading = 1 << 3;
case ide_dma_write:
- /* active tuning based on IO direction */
- if (hwif->rwproc)
- hwif->rwproc(drive, func);
-
- if (!(count = ide_build_dmatable(drive, func)))
- return 1; /* try PIO instead of DMA */
- outl(hwif->dmatable_dma, dma_base + 4); /* PRD table */
- outb(reading, dma_base); /* specify r/w */
- outb(inb(dma_base+2)|6, dma_base+2); /* clear INTR & ERROR flags */
- drive->waiting_for_dma = 1;
+ if (ide_start_dma(func, drive))
+ return 1;
+
if (drive->type != ATA_DISK)
return 0;

@@ -587,6 +613,14 @@
OUT_BYTE(reading ? WIN_READDMA : WIN_WRITEDMA, IDE_COMMAND_REG);
}
return drive->channel->udma(ide_dma_begin, drive, NULL);
+#ifdef CONFIG_BLK_DEV_IDE_TCQ
+ case ide_dma_queued_on:
+ case ide_dma_queued_off:
+ case ide_dma_read_queued:
+ case ide_dma_write_queued:
+ case ide_dma_queued_start:
+ return ide_tcq_dmaproc(func, drive, rq);
+#endif
case ide_dma_begin:
/* Note that this is done *after* the cmd has
* been issued to the drive, as per the BM-IDE spec.
diff -urN linux-2.5.13/drivers/ide/ide-probe.c linux/drivers/ide/ide-probe.c
--- linux-2.5.13/drivers/ide/ide-probe.c 2002-05-03 16:09:02.000000000 +0200
+++ linux/drivers/ide/ide-probe.c 2002-05-03 16:48:59.000000000 +0200
@@ -199,6 +199,16 @@
if (drive->channel->quirkproc)
drive->quirk_list = drive->channel->quirkproc(drive);

+ /* Initialize queue depth settings */
+ drive->queue_depth = 1;
+#ifdef CONFIG_BLK_DEV_IDE_TCQ_DEPTH
+ drive->queue_depth = CONFIG_BLK_DEV_IDE_TCQ_DEPTH;
+#else
+ drive->queue_depth = drive->id->queue_depth + 1;
+#endif
+ if (drive->queue_depth < 1 || drive->queue_depth > IDE_MAX_TAG)
+ drive->queue_depth = IDE_MAX_TAG;
+
return;

err_misc:
@@ -566,34 +576,6 @@
__restore_flags(flags);
}

-#if MAX_HWIFS > 1
-/*
- * This is used to simplify logic in init_irq() below.
- *
- * A loophole here is that we may not know about a particular hwif's irq until
- * after that hwif is actually probed/initialized.. This could be a problem
- * for the case where an hwif is on a dual interface that requires
- * serialization (eg. cmd640) and another hwif using one of the same irqs is
- * initialized beforehand.
- *
- * This routine detects and reports such situations, but does not fix them.
- */
-static struct ata_channel *save_match(struct ata_channel *ch, struct ata_channel *h,
- struct ata_channel *match)
-{
- if (match && match->hwgroup && match->hwgroup != h->hwgroup) {
- if (!h->hwgroup)
- return match;
-
- printk("%s: potential irq problem with %s and %s\n", ch->name,h->name, match->name);
- }
- if (!match || match->irq != ch->irq) /* don't undo a prior perfect match */
- match = h;
-
- return match;
-}
-#endif
-
/*
* This routine sets up the irq for an ide interface, and creates a new hwgroup
* for the irq/channel if none was previously assigned.
diff -urN linux-2.5.13/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.13/drivers/ide/ide-taskfile.c 2002-05-03 02:22:53.000000000 +0200
+++ linux/drivers/ide/ide-taskfile.c 2002-05-03 16:09:15.000000000 +0200
@@ -456,11 +456,39 @@
if (args->prehandler != NULL)
return args->prehandler(drive, rq);
} else {
- /* for dma commands we down set the handler */
- if (drive->using_dma &&
- !(drive->channel->udma(((args->taskfile.command == WIN_WRITEDMA)
- || (args->taskfile.command == WIN_WRITEDMA_EXT))
- ? ide_dma_write : ide_dma_read, drive, rq)));
+ ide_dma_action_t dma_act;
+ int tcq = 0;
+
+ if (!drive->using_dma)
+ return ide_started;
+
+ /* for dma commands we don't set the handler */
+ if (args->taskfile.command == WIN_WRITEDMA || args->taskfile.command == WIN_WRITEDMA_EXT)
+ dma_act = ide_dma_write;
+ else if (args->taskfile.command == WIN_READDMA || args->taskfile.command == WIN_READDMA_EXT)
+ dma_act = ide_dma_read;
+ else if (args->taskfile.command == WIN_WRITEDMA_QUEUED || args->taskfile.command == WIN_WRITEDMA_QUEUED_EXT) {
+ tcq = 1;
+ dma_act = ide_dma_write_queued;
+ } else if (args->taskfile.command == WIN_READDMA_QUEUED || args->taskfile.command == WIN_READDMA_QUEUED_EXT) {
+ tcq = 1;
+ dma_act = ide_dma_read_queued;
+ } else {
+ printk("ata_taskfile: unknown command %x\n", args->taskfile.command);
+ return ide_stopped;
+ }
+
+ /*
+ * FIXME: this is a gross hack, need to unify tcq dma proc and
+ * regular dma proc -- basically split stuff that needs to act
+ * on a request from things like ide_dma_check etc.
+ */
+ if (tcq)
+ return drive->channel->udma(dma_act, drive, rq);
+ else {
+ if (drive->channel->udma(dma_act, drive, rq))
+ return ide_stopped;
+ }
}

return ide_started;
@@ -523,7 +551,7 @@
ide__sti(); /* local CPU only */

if (!OK_STAT(stat = GET_STAT(), READY_STAT, BAD_STAT)) {
- /* Keep quite for NOP becouse they are expected to fail. */
+ /* Keep quiet for NOP because it is expected to fail. */
if (args && args->taskfile.command != WIN_NOP)
return ide_error(drive, "task_no_data_intr", stat);
}
diff -urN linux-2.5.13/drivers/ide/Makefile linux/drivers/ide/Makefile
--- linux-2.5.13/drivers/ide/Makefile 2002-05-03 02:22:54.000000000 +0200
+++ linux/drivers/ide/Makefile 2002-05-03 16:10:14.000000000 +0200
@@ -44,6 +44,7 @@
ide-obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o
ide-obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
ide-obj-$(CONFIG_BLK_DEV_IDEDMA_PCI) += ide-dma.o
+ide-obj-$(CONFIG_BLK_DEV_IDE_TCQ) += tcq.o
ide-obj-$(CONFIG_BLK_DEV_IDEPCI) += ide-pci.o
ide-obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
ide-obj-$(CONFIG_BLK_DEV_IDE_PMAC) += ide-pmac.o
diff -urN linux-2.5.13/drivers/ide/tcq.c linux/drivers/ide/tcq.c
--- linux-2.5.13/drivers/ide/tcq.c 1970-01-01 01:00:00.000000000 +0100
+++ linux/drivers/ide/tcq.c 2002-05-03 16:39:12.000000000 +0200
@@ -0,0 +1,642 @@
+/*
+ * Copyright (C) 2001, 2002 Jens Axboe <axboe@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Support for the DMA queued protocol, which enables ATA disk drives to
+ * use tagged command queueing.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ide.h>
+
+#include <asm/delay.h>
+
+/*
+ * warning: it will be _very_ verbose if defined
+ */
+#undef IDE_TCQ_DEBUG
+
+#ifdef IDE_TCQ_DEBUG
+#define TCQ_PRINTK printk
+#else
+#define TCQ_PRINTK(x...)
+#endif
+
+/*
+ * use nIEN or not
+ */
+#undef IDE_TCQ_NIEN
+
+/*
+ * We are leaving the SERVICE interrupt alone, IBM drives have it
+ * on per default and it can't be turned off. Doesn't matter, this
+ * is the sane config.
+ */
+#undef IDE_TCQ_FIDDLE_SI
+
+static ide_startstop_t ide_dmaq_intr(struct ata_device *drive, struct request *rq);
+static ide_startstop_t service(struct ata_device *drive);
+
+static inline void drive_ctl_nien(struct ata_device *drive, int set)
+{
+#ifdef IDE_TCQ_NIEN
+ if (IDE_CONTROL_REG) {
+ int mask = set ? 0x02 : 0x00;
+
+ OUT_BYTE(drive->ctl | mask, IDE_CONTROL_REG);
+ }
+#endif
+}
+
+static ide_startstop_t tcq_nop_handler(struct ata_device *drive, struct request *rq)
+{
+ struct ata_taskfile *args = rq->special;
+
+ ide__sti();
+ ide_end_drive_cmd(drive, GET_STAT(), GET_ERR());
+ kfree(args);
+ return ide_stopped;
+}
+
+/*
+ * If we encounter _any_ error doing I/O to one of the tags, we must
+ * invalidate the pending queue. Clear the software busy queue and requeue
+ * on the request queue for restart. Issue a WIN_NOP to clear hardware queue.
+ */
+static void tcq_invalidate_queue(struct ata_device *drive)
+{
+ ide_hwgroup_t *hwgroup = HWGROUP(drive);
+ request_queue_t *q = &drive->queue;
+ struct ata_taskfile *args;
+ struct request *rq;
+ unsigned long flags;
+
+ printk(KERN_INFO "ATA: %s: invalidating pending queue (%d)\n", drive->name, ata_pending_commands(drive));
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ del_timer(&hwgroup->timer);
+
+ if (test_bit(IDE_DMA, &hwgroup->flags))
+ drive->channel->udma(ide_dma_end, drive, hwgroup->rq);
+
+ blk_queue_invalidate_tags(q);
+
+ drive->using_tcq = 0;
+ drive->queue_depth = 1;
+ clear_bit(IDE_BUSY, &hwgroup->flags);
+ clear_bit(IDE_DMA, &hwgroup->flags);
+ hwgroup->handler = NULL;
+
+ /*
+ * Do some internal stuff -- we really need this command to be
+ * executed before any new commands are started. issue a NOP
+ * to clear internal queue on drive.
+ */
+ args = kmalloc(sizeof(*args), GFP_ATOMIC);
+ if (!args) {
+ printk(KERN_ERR "ATA: %s: failed to issue NOP\n", drive->name);
+ goto out;
+ }
+
+ rq = blk_get_request(&drive->queue, READ, GFP_ATOMIC);
+ if (!rq)
+ rq = blk_get_request(&drive->queue, WRITE, GFP_ATOMIC);
+
+ /*
+ * blk_queue_invalidate_tags() just added back at least one command
+ * to the free list, so there _must_ be at least one free.
+ */
+ BUG_ON(!rq);
+
+ rq->special = args;
+ args->taskfile.command = WIN_NOP;
+ args->handler = tcq_nop_handler;
+ args->command_type = IDE_DRIVE_TASK_NO_DATA;
+
+ rq->rq_dev = mk_kdev(drive->channel->major, (drive->select.b.unit)<<PARTN_BITS);
+ _elv_add_request(q, rq, 0, 0);
+
+ /*
+ * make sure that nIEN is cleared
+ */
+out:
+ drive_ctl_nien(drive, 0);
+
+ /*
+ * start doing stuff again
+ */
+ q->request_fn(q);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ printk(KERN_DEBUG "ATA: tcq_invalidate_queue: done\n");
+}
+
+static void ata_tcq_irq_timeout(unsigned long data)
+{
+ struct ata_device *drive = (struct ata_device *) data;
+ ide_hwgroup_t *hwgroup = HWGROUP(drive);
+ unsigned long flags;
+
+ printk(KERN_ERR "ATA: %s: timeout waiting for interrupt...\n", __FUNCTION__);
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ if (test_and_set_bit(IDE_BUSY, &hwgroup->flags))
+ printk(KERN_ERR "ATA: %s: hwgroup not busy\n", __FUNCTION__);
+ if (hwgroup->handler == NULL)
+ printk(KERN_ERR "ATA: %s: missing isr!\n", __FUNCTION__);
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+
+ /*
+ * if pending commands, try service before giving up
+ */
+ if (ata_pending_commands(drive) && (GET_STAT() & SERVICE_STAT))
+ if (service(drive) == ide_started)
+ return;
+
+ if (drive)
+ tcq_invalidate_queue(drive);
+}
+
+static void set_irq(struct ata_device *drive, ata_handler_t *handler)
+{
+ ide_hwgroup_t *hwgroup = HWGROUP(drive);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ /*
+ * always just bump the timer for now, the timeout handling will
+ * have to be changed to be per-command
+ */
+ hwgroup->timer.function = ata_tcq_irq_timeout;
+ hwgroup->timer.data = (unsigned long) hwgroup->XXX_drive;
+ mod_timer(&hwgroup->timer, jiffies + 5 * HZ);
+
+ hwgroup->handler = handler;
+ spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+/*
+ * wait 400ns, then poll for busy_mask to clear from alt status
+ */
+#define IDE_TCQ_WAIT (10000)
+static int wait_altstat(struct ata_device *drive, u8 *stat, u8 busy_mask)
+{
+ int i = 0;
+
+ udelay(1);
+
+ while ((*stat = GET_ALTSTAT()) & busy_mask) {
+ if (unlikely(i++ > IDE_TCQ_WAIT))
+ return 1;
+
+ udelay(10);
+ }
+
+ return 0;
+}
+
+/*
+ * issue SERVICE command to drive -- drive must have been selected first,
+ * and it must have reported a need for service (status has SERVICE_STAT set)
+ *
+ * Also, nIEN must be set as not to need protection against ide_dmaq_intr
+ */
+static ide_startstop_t service(struct ata_device *drive)
+{
+ struct request *rq;
+ u8 feat;
+ u8 stat;
+ int tag;
+
+ TCQ_PRINTK("%s: started service\n", drive->name);
+
+ /*
+ * Could be called with IDE_DMA in-progress from invalidate
+ * handler, refuse to do anything.
+ */
+ if (test_bit(IDE_DMA, &HWGROUP(drive)->flags))
+ return ide_stopped;
+
+ /*
+ * need to select the right drive first...
+ */
+ if (drive != HWGROUP(drive)->XXX_drive) {
+ SELECT_DRIVE(drive->channel, drive);
+ udelay(10);
+ }
+
+ drive_ctl_nien(drive, 1);
+
+ /*
+ * send SERVICE, wait 400ns, wait for BUSY_STAT to clear
+ */
+ OUT_BYTE(WIN_QUEUED_SERVICE, IDE_COMMAND_REG);
+
+ if (wait_altstat(drive, &stat, BUSY_STAT)) {
+ printk(KERN_ERR"%s: BUSY clear took too long\n", __FUNCTION__);
+ ide_dump_status(drive, __FUNCTION__, stat);
+ tcq_invalidate_queue(drive);
+ return ide_stopped;
+ }
+
+ drive_ctl_nien(drive, 0);
+
+ /*
+ * FIXME, invalidate queue
+ */
+ if (stat & ERR_STAT) {
+ ide_dump_status(drive, __FUNCTION__, stat);
+ tcq_invalidate_queue(drive);
+ return ide_stopped;
+ }
+
+ /*
+ * should not happen, a buggy device could introduce loop
+ */
+ if ((feat = GET_FEAT()) & NSEC_REL) {
+ HWGROUP(drive)->rq = NULL;
+ printk("%s: release in service\n", drive->name);
+ return ide_stopped;
+ }
+
+ tag = feat >> 3;
+
+ TCQ_PRINTK("%s: stat %x, feat %x\n", __FUNCTION__, stat, feat);
+
+ rq = blk_queue_tag_request(&drive->queue, tag);
+ if (!rq) {
+ printk(KERN_ERR"%s: missing request for tag %d\n", __FUNCTION__, tag);
+ return ide_stopped;
+ }
+
+ HWGROUP(drive)->rq = rq;
+
+ /*
+ * we'll start a dma read or write, device will trigger
+ * interrupt to indicate end of transfer, release is not allowed
+ */
+ TCQ_PRINTK("%s: starting command %x\n", __FUNCTION__, stat);
+ return drive->channel->udma(ide_dma_queued_start, drive, rq);
+}
+
+static ide_startstop_t check_service(struct ata_device *drive)
+{
+ u8 stat;
+
+ TCQ_PRINTK("%s: %s\n", drive->name, __FUNCTION__);
+
+ if (!ata_pending_commands(drive))
+ return ide_stopped;
+
+ if ((stat = GET_STAT()) & SERVICE_STAT)
+ return service(drive);
+
+ /*
+ * we have pending commands, wait for interrupt
+ */
+ set_irq(drive, ide_dmaq_intr);
+
+ return ide_started;
+}
+
+ide_startstop_t ide_dmaq_complete(struct ata_device *drive, struct request *rq, u8 stat)
+{
+ u8 dma_stat;
+
+ /*
+ * transfer was in progress, stop DMA engine
+ */
+ dma_stat = drive->channel->udma(ide_dma_end, drive, rq);
+
+ /*
+ * must be end of I/O, check status and complete as necessary
+ */
+ if (unlikely(!OK_STAT(stat, READY_STAT, drive->bad_wstat | DRQ_STAT))) {
+ printk(KERN_ERR "%s: %s: error status %x\n", __FUNCTION__, drive->name,stat);
+ ide_dump_status(drive, __FUNCTION__, stat);
+ tcq_invalidate_queue(drive);
+ return ide_stopped;
+ }
+
+ if (dma_stat)
+ printk("%s: bad DMA status (dma_stat=%x)\n", drive->name, dma_stat);
+
+ TCQ_PRINTK("%s: ending %p, tag %d\n", __FUNCTION__, rq, rq->tag);
+ __ide_end_request(drive, rq, !dma_stat, rq->nr_sectors);
+
+ /*
+ * we completed this command, check if we can service a new command
+ */
+ return check_service(drive);
+}
+
+/*
+ * intr handler for queued dma operations. this can be entered for two
+ * reasons:
+ *
+ * 1) device has completed dma transfer
+ * 2) service request to start a command
+ *
+ * if the drive has an active tag, we first complete that request before
+ * processing any pending SERVICE.
+ */
+static ide_startstop_t ide_dmaq_intr(struct ata_device *drive, struct request *rq)
+{
+ u8 stat = GET_STAT();
+
+ TCQ_PRINTK("%s: stat=%x\n", __FUNCTION__, stat);
+
+ /*
+ * if a command completion interrupt is pending, do that first and
+ * check service afterwards
+ */
+ if (rq)
+ return ide_dmaq_complete(drive, rq, stat);
+
+ /*
+ * service interrupt
+ */
+ if (stat & SERVICE_STAT) {
+ TCQ_PRINTK("%s: SERV (stat=%x)\n", __FUNCTION__, stat);
+ return service(drive);
+ }
+
+ printk("%s: stat=%x, not expected\n", __FUNCTION__, stat);
+ return check_service(drive);
+}
+
+/*
+ * Check if the ata adapter this drive is attached to supports the
+ * NOP auto-poll for multiple tcq enabled drives on one channel.
+ */
+static int check_autopoll(struct ata_device *drive)
+{
+ struct ata_channel *ch = drive->channel;
+ struct ata_taskfile args;
+ int drives = 0, i;
+
+ /*
+ * only need to probe if both drives on a channel support tcq
+ */
+ for (i = 0; i < MAX_DRIVES; i++)
+ if (drive->channel->drives[i].present &&drive->type == ATA_DISK)
+ drives++;
+
+ if (drives <= 1)
+ return 0;
+
+ memset(&args, 0, sizeof(args));
+
+ args.taskfile.feature = 0x01;
+ args.taskfile.command = WIN_NOP;
+ ide_cmd_type_parser(&args);
+
+ /*
+ * do taskfile and check ABRT bit -- intelligent adapters will not
+ * pass NOP with sub-code 0x01 to device, so the command will not
+ * fail there
+ */
+ ide_raw_taskfile(drive, &args, NULL);
+ if (args.taskfile.feature & ABRT_ERR)
+ return 1;
+
+ ch->auto_poll = 1;
+ printk("%s: NOP Auto-poll enabled\n", ch->name);
+ return 0;
+}
+
+/*
+ * configure the drive for tcq
+ */
+static int configure_tcq(struct ata_device *drive)
+{
+ int tcq_mask = 1 << 1 | 1 << 14;
+ int tcq_bits = tcq_mask | 1 << 15;
+ struct ata_taskfile args;
+
+ /*
+ * bit 14 and 1 must be set in word 83 of the device id to indicate
+ * support for dma queued protocol, and bit 15 must be cleared
+ */
+ if ((drive->id->command_set_2 & tcq_bits) ^ tcq_mask)
+ return -EIO;
+
+ memset(&args, 0, sizeof(args));
+ args.taskfile.feature = SETFEATURES_EN_WCACHE;
+ args.taskfile.command = WIN_SETFEATURES;
+ ide_cmd_type_parser(&args);
+
+ if (ide_raw_taskfile(drive, &args, NULL)) {
+ printk("%s: failed to enable write cache\n", drive->name);
+ return 1;
+ }
+
+ /*
+ * disable RELease interrupt, it's quicker to poll this after
+ * having sent the command opcode
+ */
+ memset(&args, 0, sizeof(args));
+ args.taskfile.feature = SETFEATURES_DIS_RI;
+ args.taskfile.command = WIN_SETFEATURES;
+ ide_cmd_type_parser(&args);
+
+ if (ide_raw_taskfile(drive, &args, NULL)) {
+ printk("%s: disabling release interrupt fail\n", drive->name);
+ return 1;
+ }
+
+#ifdef IDE_TCQ_FIDDLE_SI
+ /*
+ * enable SERVICE interrupt
+ */
+ memset(&args, 0, sizeof(args));
+ args.taskfile.feature = SETFEATURES_EN_SI;
+ args.taskfile.command = WIN_SETFEATURES;
+ ide_cmd_type_parser(&args);
+
+ if (ide_raw_taskfile(drive, &args, NULL)) {
+ printk("%s: enabling service interrupt fail\n", drive->name);
+ return 1;
+ }
+#endif
+
+ return 0;
+}
+
+/*
+ * for now assume that command list is always as big as we need and don't
+ * attempt to shrink it on tcq disable
+ */
+static int enable_queued(struct ata_device *drive, int on)
+{
+ int depth = drive->using_tcq ? drive->queue_depth : 0;
+
+ /*
+ * disable or adjust queue depth
+ */
+ if (!on) {
+ if (drive->using_tcq)
+ printk("%s: TCQ disabled\n", drive->name);
+ drive->using_tcq = 0;
+ return 0;
+ }
+
+ if (configure_tcq(drive)) {
+ drive->using_tcq = 0;
+ return 1;
+ }
+
+ /*
+ * enable block tagging
+ */
+ if (!blk_queue_tagged(&drive->queue))
+ blk_queue_init_tags(&drive->queue, IDE_MAX_TAG);
+
+ /*
+ * check auto-poll support
+ */
+ check_autopoll(drive);
+
+ if (depth != drive->queue_depth)
+ printk("%s: tagged command queueing enabled, command queue depth %d\n", drive->name, drive->queue_depth);
+
+ drive->using_tcq = 1;
+ return 0;
+}
+
+static int tcq_wait_dataphase(struct ata_device *drive)
+{
+ u8 stat;
+ int i;
+
+ while ((stat = GET_STAT()) & BUSY_STAT)
+ udelay(10);
+
+ if (OK_STAT(stat, READY_STAT | DRQ_STAT, drive->bad_wstat))
+ return 0;
+
+ i = 0;
+ udelay(1);
+ while (!OK_STAT(GET_STAT(), READY_STAT | DRQ_STAT, drive->bad_wstat)) {
+ if (unlikely(i++ > IDE_TCQ_WAIT))
+ return 1;
+
+ udelay(10);
+ }
+
+ return 0;
+}
+
+ide_startstop_t ide_tcq_dmaproc(ide_dma_action_t func, struct ata_device *drive, struct request *rq)
+{
+ struct ata_channel *hwif = drive->channel;
+ unsigned int enable_tcq = 1;
+ u8 stat;
+ u8 feat;
+
+ switch (func) {
+ /*
+ * invoked from a SERVICE interrupt, command etc already known.
+ * just need to start the dma engine for this tag
+ */
+ case ide_dma_queued_start:
+ TCQ_PRINTK("ide_dma: setting up queued %d\n", rq->tag);
+ if (!test_bit(IDE_BUSY, &HWGROUP(drive)->flags))
+ printk("queued_rw: IDE_BUSY not set\n");
+
+ if (tcq_wait_dataphase(drive))
+ return ide_stopped;
+
+ if (ide_start_dma(func, drive))
+ return ide_stopped;
+
+ set_irq(drive, ide_dmaq_intr);
+ if (!hwif->udma(ide_dma_begin, drive, rq))
+ return ide_started;
+
+ return ide_stopped;
+
+ /*
+ * start a queued command from scratch
+ */
+ case ide_dma_read_queued:
+ case ide_dma_write_queued: {
+ struct ata_taskfile *args = rq->special;
+
+ TCQ_PRINTK("%s: start tag %d\n", drive->name, rq->tag);
+
+ /*
+ * set nIEN, tag start operation will enable again when
+ * it is safe
+ */
+ drive_ctl_nien(drive, 1);
+
+ OUT_BYTE(args->taskfile.command, IDE_COMMAND_REG);
+
+ if (wait_altstat(drive, &stat, BUSY_STAT)) {
+ ide_dump_status(drive, "queued start", stat);
+ tcq_invalidate_queue(drive);
+ return ide_stopped;
+ }
+
+ drive_ctl_nien(drive, 0);
+
+ if (stat & ERR_STAT) {
+ ide_dump_status(drive, "tcq_start", stat);
+ return ide_stopped;
+ }
+
+ /*
+ * drive released the bus, clear active tag and
+ * check for service
+ */
+ if ((feat = GET_FEAT()) & NSEC_REL) {
+ drive->immed_rel++;
+ HWGROUP(drive)->rq = NULL;
+ set_irq(drive, ide_dmaq_intr);
+
+ TCQ_PRINTK("REL in queued_start\n");
+
+ if ((stat = GET_STAT()) & SERVICE_STAT)
+ return service(drive);
+
+ return ide_released;
+ }
+
+ TCQ_PRINTK("IMMED in queued_start\n");
+ drive->immed_comp++;
+ return hwif->udma(ide_dma_queued_start, drive, rq);
+ }
+
+ case ide_dma_queued_off:
+ enable_tcq = 0;
+ case ide_dma_queued_on:
+ if (enable_tcq && !drive->using_dma)
+ return 1;
+ return enable_queued(drive, enable_tcq);
+ default:
+ break;
+ }
+
+ return 1;
+}
diff -urN linux-2.5.13/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.13/include/linux/ide.h 2002-05-03 02:22:44.000000000 +0200
+++ linux/include/linux/ide.h 2002-05-03 16:48:10.000000000 +0200
@@ -298,6 +298,7 @@
u8 tune_req; /* requested drive tuning setting */

byte using_dma; /* disk is using dma for read/write */
+ byte using_tcq; /* disk is using queueing */
byte retry_pio; /* retrying dma capable host in pio */
byte state; /* retry state */
byte dsc_overlap; /* flag: DSC overlap */
@@ -360,9 +361,17 @@
byte dn; /* now wide spread use */
byte wcache; /* status of write cache */
byte acoustic; /* acoustic management */
+ byte queue_depth; /* max queue depth */
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
struct device device; /* global device tree handle */
+ /*
+ * tcq statistics
+ */
+ unsigned long immed_rel;
+ unsigned long immed_comp;
+ int max_last_depth;
+ int max_depth;
} ide_drive_t;

/*
@@ -381,7 +390,10 @@
ide_dma_off, ide_dma_off_quietly, ide_dma_test_irq,
ide_dma_bad_drive, ide_dma_good_drive,
ide_dma_verbose, ide_dma_retune,
- ide_dma_lostirq, ide_dma_timeout
+ ide_dma_lostirq, ide_dma_timeout,
+ ide_dma_read_queued, ide_dma_write_queued,
+ ide_dma_queued_start, ide_dma_queued_on,
+ ide_dma_queued_off,
} ide_dma_action_t;

enum {
@@ -400,7 +412,7 @@
#ifdef CONFIG_BLK_DEV_IDEPCI
struct pci_dev *pci_dev; /* for pci chipsets */
#endif
- ide_drive_t drives[MAX_DRIVES]; /* drive info */
+ struct ata_device drives[MAX_DRIVES]; /* drive info */
struct gendisk *gd; /* gendisk structure */

/*
@@ -409,32 +421,32 @@
* A value of 255 indicates that the function should choose the optimal
* mode itself.
*/
- void (*tuneproc) (ide_drive_t *, byte pio);
- int (*speedproc) (ide_drive_t *, byte pio);
+ void (*tuneproc) (struct ata_device *, byte pio);
+ int (*speedproc) (struct ata_device *, byte pio);

/* tweaks hardware to select drive */
- void (*selectproc) (ide_drive_t *);
+ void (*selectproc) (struct ata_device *);

/* routine to reset controller after a disk reset */
- void (*resetproc) (ide_drive_t *);
+ void (*resetproc) (struct ata_device *);

/* special interrupt handling for shared pci interrupts */
- void (*intrproc) (ide_drive_t *);
+ void (*intrproc) (struct ata_device *);

/* special host masking for drive selection */
- void (*maskproc) (ide_drive_t *, int);
+ void (*maskproc) (struct ata_device *, int);

/* adjust timing based upon rq->cmd direction */
- void (*rwproc) (ide_drive_t *, ide_dma_action_t);
+ void (*rwproc) (struct ata_device *, ide_dma_action_t);

/* check host's drive quirk list */
- int (*quirkproc) (ide_drive_t *);
+ int (*quirkproc) (struct ata_device *);

/* CPU-polled transfer routines */
- void (*ata_read)(ide_drive_t *, void *, unsigned int);
- void (*ata_write)(ide_drive_t *, void *, unsigned int);
- void (*atapi_read)(ide_drive_t *, void *, unsigned int);
- void (*atapi_write)(ide_drive_t *, void *, unsigned int);
+ void (*ata_read)(struct ata_device *, void *, unsigned int);
+ void (*ata_write)(struct ata_device *, void *, unsigned int);
+ void (*atapi_read)(struct ata_device *, void *, unsigned int);
+ void (*atapi_write)(struct ata_device *, void *, unsigned int);

int (*udma)(ide_dma_action_t, struct ata_device *, struct request *); /* dma read/write/abort routine */
unsigned int *dmatable_cpu; /* dma physical region descriptor table (cpu view) */
@@ -462,6 +474,7 @@
unsigned highmem : 1; /* can do full 32-bit dma */
unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
unsigned no_unmask : 1; /* disallow setting unmask bit */
+ unsigned auto_poll : 1; /* supports nop auto-poll */
byte io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
byte unmask; /* flag: okay to unmask other irqs */
byte slow; /* flag: slow data port */
@@ -470,7 +483,7 @@
unsigned long last_time; /* time when previous rq was done */
#endif
byte straight8; /* Alan's straight 8 check */
- int (*busproc)(ide_drive_t *, int); /* driver soft-power interface */
+ int (*busproc)(struct ata_device *, int); /* driver soft-power interface */
byte bus_state; /* power state of the IDE bus */
};

@@ -501,6 +514,29 @@
#define IDE_SLEEP 1
#define IDE_DMA 2 /* DMA in progress */

+#define IDE_MAX_TAG 32
+
+#ifdef CONFIG_BLK_DEV_IDE_TCQ
+static inline int ata_pending_commands(struct ata_device *drive)
+{
+ if (drive->using_tcq)
+ return blk_queue_tag_depth(&drive->queue);
+
+ return 0;
+}
+
+static inline int ata_can_queue(struct ata_device *drive)
+{
+ if (drive->using_tcq)
+ return blk_queue_tag_queue(&drive->queue);
+
+ return 1;
+}
+#else
+#define ata_pending_commands(drive) (0)
+#define ata_can_queue(drive) (1)
+#endif
+
typedef struct hwgroup_s {
ide_startstop_t (*handler)(struct ata_device *, struct request *); /* irq handler, if active */
unsigned long flags; /* BUSY, SLEEPING */
@@ -746,14 +782,14 @@
ide_startstop_t (*handler)(struct ata_device *, struct request *);
};

-extern void ata_read(ide_drive_t *drive, void *buffer, unsigned int wcount);
-extern void ata_write(ide_drive_t *drive, void *buffer, unsigned int wcount);
+extern void ata_read(struct ata_device *, void *, unsigned int);
+extern void ata_write(struct ata_device *, void *, unsigned int);

-extern void atapi_read(ide_drive_t *drive, void *buffer, unsigned int bytecount);
-extern void atapi_write(ide_drive_t *drive, void *buffer, unsigned int bytecount);
+extern void atapi_read(struct ata_device *, void *, unsigned int);
+extern void atapi_write(struct ata_device *, void *, unsigned int);

-extern ide_startstop_t ata_taskfile(ide_drive_t *drive,
- struct ata_taskfile *args, struct request *rq);
+extern ide_startstop_t ata_taskfile(struct ata_device *,
+ struct ata_taskfile *, struct request *);

/*
* Special Flagged Register Validation Caller
@@ -838,9 +874,9 @@
extern int idescsi_init (void);
#endif

-ide_drive_t *ide_scan_devices (byte media, const char *name, struct ata_operations *driver, int n);
-extern int ide_register_subdriver(ide_drive_t *drive, struct ata_operations *driver);
-extern int ide_unregister_subdriver(ide_drive_t *drive);
+extern struct ata_device *ide_scan_devices(byte, const char *, struct ata_operations *, int);
+extern int ide_register_subdriver(struct ata_device *, struct ata_operations *);
+extern int ide_unregister_subdriver(struct ata_device *drive);

#ifdef CONFIG_BLK_DEV_IDEPCI
# define ON_BOARD 1
@@ -854,21 +890,22 @@
void __init ide_scan_pcibus(int scan_direction);
#endif
#ifdef CONFIG_BLK_DEV_IDEDMA
-int ide_build_dmatable (ide_drive_t *drive, ide_dma_action_t func);
-void ide_destroy_dmatable (ide_drive_t *drive);
+extern int ide_build_dmatable(struct ata_device *, ide_dma_action_t);
+extern void ide_destroy_dmatable(struct ata_device *);
extern ide_startstop_t ide_dma_intr(struct ata_device *, struct request *);
-int check_drive_lists (ide_drive_t *drive, int good_bad);
-int ide_dmaproc (ide_dma_action_t func, struct ata_device *drive, struct request *);
-extern void ide_release_dma(struct ata_channel *hwif);
-extern void ide_setup_dma(struct ata_channel *hwif,
- unsigned long dmabase, unsigned int num_ports) __init;
+extern int check_drive_lists(struct ata_device *, int good_bad);
+extern int ide_dmaproc(ide_dma_action_t func, struct ata_device *, struct request *);
+extern ide_startstop_t ide_tcq_dmaproc(ide_dma_action_t, struct ata_device *, struct request *);
+extern void ide_release_dma(struct ata_channel *);
+extern void ide_setup_dma(struct ata_channel *, unsigned long, unsigned int) __init;
+extern int ide_start_dma(ide_dma_action_t, struct ata_device *);
#endif

extern spinlock_t ide_lock;

#define DRIVE_LOCK(drive) ((drive)->queue.queue_lock)

-extern int drive_is_ready(ide_drive_t *drive);
+extern int drive_is_ready(struct ata_device *drive);
extern void revalidate_drives(void);

#endif
\
 
 \ /
  Last update: 2005-03-22 13:25    [W:0.258 / U:3.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site