Messages in this thread | | | Date | Thu, 30 May 2002 00:00:46 +0200 | From | Martin Dalecki <> | Subject | Re: IDE breakage with cdrom in 2.5.18+ |
| |
Thierry Vignaud wrote: > "Udo A. Steinberg" <reality@delusion.de> writes: > > >>/dev/hde shows packet command errors upon bootup. Any ideas? > > >>hda: IBM-DTLA-307030, ATA DISK drive >>hdb: IBM-DTLA-307030, ATA DISK drive >>hde: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive >>ide0 at 0x9400-0x9407,0x9002 on irq 10 >>ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 >> hda: 60036480 sectors w/1916KiB Cache, CHS=59560/16/63, UDMA(100) >> hda: hda1 >> hdb: 60036480 sectors w/1916KiB Cache, CHS=59560/16/63, UDMA(100) >> hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 > >>hde: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA >>Uniform CD-ROM driver Revision: 3.12 >>hde: packet command error: status=0x51 { DriveReady SeekComplete Error } >>hde: packet command error: error=0x54 >>ATAPI device hde: >> Error: Illegal request -- (Sense key=0x05) >> Invalid field in command packet -- (asc=0x24, ascq=0x00) >> The failed "Request Sense" packet command was: >> "03 00 00 00 12 00 00 00 00 00 00 00 " > > > afaic looks "try to detect partitions" lookup that should not had been > done on cdrom :-( >
Just remove (or tweak) the ata_revalidate from the recently added attach method there and you should be fine perhaps. I will check this tomorrow later. This doesn't happen with a modularized driver and therefore the chances are indeed very high that this is the culprit.
-- - phone: +49 214 8656 283 - job: eVision-Ventures AG, LEV .de (MY OPINIONS ARE MY OWN!) - langs: de_DE.ISO8859-1, en_US, pl_PL.ISO8859-2, last ressort: ru_RU.KOI8-R
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |