lkml.org 
[lkml]   [2002]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectCannot write a 90' cd
    Hello, I tried with kernels 2.5.16, 2.5.15 and 2.4.18 with a ide cdburner:

    scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    Vendor: SAMSUNG Model: CD-R/RW SW-208B Rev: BS03
    Type: CD-ROM ANSI SCSI revision: 02

    with cdrecord --version
    Cdrecord 1.11a19 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
    but it's a 1.11a21, and a 2x200mmx 96Mb. and the results were rather disapointing:

    - 2.5.15 & 2.5.16 both hung my machine the moment cdrecord tried to write.
    - 2.4.18 wrote ok, until 702MB, then a scsi stopped the procces, detailed log of
    the cdrecord session follows:

    Cdrecord 1.11a19 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
    TOC Type: 1 = CD-ROM
    scsidev: '0,0,0'
    scsibus: 0 target: 0 lun: 0
    Linux sg driver version: 3.1.22
    Using libscg version 'schily-0.6'
    atapi: 1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 1
    Vendor_info : 'SAMSUNG '
    Identifikation : 'CD-R/RW SW-208B '
    Revision : 'BS03'
    Device seems to be: Generic mmc CD-RW.
    Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
    Driver flags : SWABAUDIO
    Supported modes: TAO PACKET RAW/R16 RAW/R96R
    FIFO size : 25165824 = 24576 KB
    Track 01: data 753 MB
    Total size: 865 MB (85:43.10) = 385733 sectors
    Lout start: 865 MB (85:45/08) = 385733 sectors
    Current Secsize: 2048
    ATIP start of lead in: -11526 (97:28/24)
    ATIP start of lead out: 359849 (79:59/74)
    Disk type: Long strategy type (Cyanine, AZO or similar)
    Manuf. index: 13
    Manufacturer: Multi Media Masters & Machinary SA
    Blocks total: 359849 Blocks current: 359849 Blocks remaining: -25884
    cdrecord: WARNING: Data may not fit on current disk.
    cdrecord: Notice: Overburning active. Trying to write more than the official
    disk capacity.
    Starting to write CD/DVD at speed 8 in write mode for single session.
    Last chance to quit, starting real write in 0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Starting new track at sector: 0
    Track 01: 702 of 753 MB written (fifo 100%) 8.1x.cdrecord: Input/output error.
    write_g1: scsi sendcmd: no error
    CDB: 2A 00 00 05 7D 89 00 00 1F 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 63 00 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x63 Qual 0x00 (end of user area encountered on this track) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.004s timeout 40s

    write track data: error after 736905216 bytes
    Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 04 00 00 00 00
    Writing time: 607.270s
    Fixating...
    Fixating time: 44.250s
    cdrecord: fifo had 11990 puts and 11608 gets.
    cdrecord: fifo was 0 times empty and 11261 times full, min fill was 98%.

    Note that this was a traxdata 90' silver cd, in the instructions they said that
    it will be detected as a 80' and that you should enable overburnung, cdrecord
    without options said that -overburn should be active, this session is with
    -overburn active.

    I don't have more 90' cd to try. I only managed to get one.

    --
    Jorge Nerin
    <comandante@zaralinux.com>

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:22    [W:0.030 / U:0.292 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site