Messages in this thread | | | From | <> | Subject | BUG? | Date | Tue, 21 May 2002 12:48:19 +0300 |
| |
Dear Sirs, this can be lamer's question (I'm sorry rite now!), but...
The report itself is:
################################################################################
[1.] Linux crashes at the 'interactive startup' boot stage.
[2.] Once the system is trying to boot, first stage (which is *before* msg 'Interactive startup') it is all O.K. Once the 'Interactive startup' stage begins, the bootstrap process fails with diffirent msgs; all of them begins with "Unable to handle kernel paging request at address..." or "Unable to handle kernel dereference at address..." (first 'reason' is in the majority of cases, the second is quite unusual).
It seems to me that this is a trouble with initrd.img, because once I've recompiled kernel with ALL OPTIONS (not suitable to my hardware, i.e. SCSI adapters) turned OFF, the problem remains. I've notices that sometimes such a trouble is 'reached' with 'IH' flag of 'EFLAGS' (bit no 10) set to zero. As far as I know it's status, it tells CPU ignore any interrupt requests... The keyboard stops functioning on such a crashes as usual, but there was TWO TIMES the keyboard remains it's working state like an echo, not like control-device. :-\ May be, it's lamer's notice, I do not know, but I thought this may be useful... I thouht that hardware configuration may be useful too: M/B: GigaByte GA-7ZX-H Chipset: VIA Apollo KT133A Features: VIA AC'97 audio on VT82C686B CPU: AMD Athlon Thunderbird 900 MHz, FSB 100 MHz RAM: IBM 256 Mb PC-133
[3.] boot process, initrd, rc.sysinit
[4.] Kernel version (from /proc/version): Linux version 2.4.7-10BOOT (bhcompile@stripples.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 16:15:00 EDT 2001
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
OK, I'm adding one example (hand-written).
---8<----------------------------------------------------------------------- <1>Unable to handle kernel paging request at virtual address 0ec3df54 Printing eip: c012b69f *pde=00000000 CPU: 0 EIP: 0010:[<c012b69f>] EFLAGS: 00010006 eax: cfcfcfcf ebx: cfcfcfcf ecx: 00000282 edx: cfa4a000 esi: c1723e6c edi: cfbde200 ebp: cfd27bc0 esp: cfa47d58 ds: 0018 es: 0018 ss: 0018 Process rc.sysinit (pid: 29, stackpage=cfa47000) Stack: c0230979 c011b03e c022c9c7 00000000 cfa47df4 fffffff4 c0146fb8 c1723e6c 000000f0 c1757e88 cfbe5005 11163d8b 00000005 cfa47df4 fffffff1 cfbde200 cfd27bc0 c013ed7c cfd27bc0 cfa47df4 fffffdce cfd27bc0 cfa14df4 00000000 Call trace: [<c0230979>] [<c022b03c>] [<c022c9c7>] [<c0146fb8>] [<c013ed7c>] [<c013f4a6>] [<c018c1a3>] [<c013d0f5>] [<c013dabc>] [<c012e6be>] [<c0204daf>] [<c0123c0a>] [<c0123c7d>] [<c012439c>] [<c0113450>] [<c01135ca>] [<c011f717>] [<c011fad3>] [<c013eade>] [<c0105b60>] [<c0106f2b>] Code: 8b 44 82 18 0f af 5a 0c 89 42 14 03 5a 0c 40 75 05 8b 02 89 /etc/rc.sysinit: line 49: 29 Segmentation failt /bin/dmesg -n $LOGLEVEL ---8<-----------------------------------------------------------------------
[6.] A small shell script or example program which triggers the problem (if possible)
SORRY, it's impossible. I've made about two hundred tried but I've never got just "localhost login:" message... >:-(((
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux localhost.localdomain 2.4.7-10BOOT #1 Thu Sep 6 16:15:00 EDT 2001 i686 unknown Gnu C 2.96 Gnu make 3.79.1 binutils 2.11.90.0.8 util-linux 2.11f mount 2.11g modutils 2.4.6 e2fsprogs tune2fs reiserfsprogs 3.x.0j PPP 2.4.1 isdn4k-utils 3.1pre1 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.60 Console-tools 0.3.3 Sh-utils 2.0.11 Modules Loaded reiserfs ext3 jbd vfat msdos fat raid5 xor raid1 raid0 usb-storage keybdev hid input usb-uhci usbcore sr_mod sd_mod scsi_mod
[7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 4 model name : AMD Athlon(tm) Processor stepping : 2 cpu MHz : 902.081 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow bogomips : 1795.68
[7.3.] Module information (from /proc/modules): reiserfs 142480 0 (unused) ext3 57456 0 jbd 34560 0 [ext3] vfat 8400 1 msdos 4624 0 (unused) fat 29152 0 [vfat msdos] raid5 16080 0 (unused) xor 5488 0 [raid5] raid1 11872 0 (unused) raid0 3056 0 (unused) usb-storage 32544 0 (unused) keybdev 1584 0 (unused) hid 18224 0 (unused) input 3136 0 [keybdev hid] usb-uhci 20080 0 (unused) usbcore 47552 1 [usb-storage hid usb-uhci] sr_mod 12944 0 (unused) sd_mod 10368 0 (unused) scsi_mod 49488 2 [usb-storage sr_mod sd_mod]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) /proc/ioports output: 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0400-040f : PCI device 1106:3057 0c00-0c7f : PCI device 1106:3057 0cf8-0cff : PCI conf1 a000-afff : PCI Bus #01 cc00-cc1f : PCI device 1106:3038 cc00-cc1f : usb-uhci d000-d01f : PCI device 1106:3038 d000-d01f : usb-uhci d400-d403 : PCI device 1106:3058 d800-d803 : PCI device 1106:3058 dc00-dcff : PCI device 1106:3058 ffa0-ffaf : PCI device 1106:0571 ffa0-ffa7 : ide0 ffa8-ffaf : ide1
/proc/iomem output:
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-0ffeffff : System RAM 00100000-0021680f : Kernel code 00216810-0022cd8b : Kernel data 0fff0000-0fff7fff : ACPI Tables 0fff8000-0fffffff : ACPI Non-volatile Storage cdc00000-ddcfffff : PCI Bus #01 d0000000-d7ffffff : PCI device 10de:0110 d0000000-d1ffffff : vesafb dde00000-dfefffff : PCI Bus #01 de000000-deffffff : PCI device 10de:0110 e0000000-e3ffffff : PCI device 1106:0305 ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: dde00000-dfefffff Prefetchable memory behind bridge: cdc00000-ddcfffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at ffa0 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at cc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 50) Subsystem: Giga-byte Technology: Unknown device a000 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 10 Region 0: I/O ports at dc00 [size=256] Region 1: I/O ports at d800 [size=4] Region 2: I/O ports at d400 [size=4] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev a1) (prog-if 00 [VGA]) Subsystem: LeadTek Research Inc.: Unknown device 2830 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at dfef0000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices: none
[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant):
--- [X.] Other notes, patches, fixes, workarounds:
I've tried recompile the kernel from rescue shell, but nothing has changed. ################################################################################ Thank you in advance. With kindest regards, Alex Nedovizij. ---- Optimag : Canon PowerShot Pro 90IS : $995 http://pc.optimag.net/browse/27/77/433.html - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |