Messages in this thread | | | Date | Wed, 1 May 2002 14:36:05 +0200 | From | Gregoire Favre <> | Subject | 2.5.1[012] Oops (id-secsi) |
| |
Hello,
I have just booted 2.5.12 and got same result as with 2.5.1[01]:
Linux version 2.5.12 (greg@ulima.unil.ch) (gcc version 2.96 20000731 (Mandrake Linux 8.3 2.96-0.79mdk)) #13 Wed May 1 13:00:06 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017ffe000 (usable) BIOS-e820: 0000000017ffe000 - 0000000018000000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98302 zone(0): 4096 pages. zone(1): 94206 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=2.5.12 rw root=302 video=atyfb:1024x768-16@100 console=ttyS0 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 548.327 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 1094.45 BogoMIPS Memory: 387268k/393208k available (1275k kernel code, 5556k reserved, 301k data, 232k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Katmai) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 548.3387 MHz. ..... host bus clock speed is 99.6977 MHz. cpu: 0, clocks: 996977, slice: 498488 CPU0<T0:996976,T1:498480,D:8,S:498488,C:996977> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfcaee, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: Card 'CS4236B' isapnp: 1 Plug & Play card detected total PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver PnPBIOS: PNP0c01: ioport range 0x800-0x83f has been reserved PnPBIOS: PNP0c01: ioport range 0x850-0x85f has been reserved Starting kswapd BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec: init pool 0, 1 entries, 12 bytes biovec: init pool 1, 4 entries, 48 bytes biovec: init pool 2, 16 entries, 192 bytes biovec: init pool 3, 64 entries, 768 bytes biovec: init pool 4, 128 entries, 1536 bytes biovec: init pool 5, 256 entries, 3072 bytes Installing knfsd (copyright (C) 1996 okir@monad.swb.de). atyfb: 3D RAGE PRO (BGA, AGP) [0x4742 rev 0x7c] 8M SGRAM, 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK Console: switching to colour frame buffer device 128x48 fb0: ATY Mach64 frame buffer device on PCI pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: 256 slots per queue, batch=32 PCI: Found IRQ 11 for device 00:11.0 PCI: Sharing IRQ 11 with 00:07.2 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xcc00. Vers LK1.1.17 phy=0, phyx=24, mii_status=0x786d Uniform Multi-Platform E-IDE driver ver.:7.0.0 ide: system bus speed 33MHz Intel Corp. 82371AB PIIX4 IDE: unknown IDE controller on PCI slot 00:07.1, vendor=8086, device=7111 Intel Corp. 82371AB PIIX4 IDE: chipset revision 1 Intel Corp. 82371AB PIIX4 IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALL CX13.6A, ATA DISK drive hdc: CRD-8400B, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 26760384 sectors w/418KiB Cache, CHS=26548/16/63, UDMA(33) Partition check: hda: [PTBL] [1665/255/63] hda1 hda2 hdd:ide-scsi: unsup command: dev 16:40: REQ_CMD REQ_STARTED sector 0, nr/cnr 8/2
end_request: I/O error, dev 16:40, sector 0 end_buffer_io_async: I/O error ide-scsi: unsup command: dev 16:40: REQ_CMD REQ_STARTED sector 2, nr/cnr 6/2
end_request: I/O error, dev 16:40, sector 2 end_buffer_io_async: I/O error ide-scsi: unsup command: dev 16:40: REQ_CMD REQ_STARTED sector 4, nr/cnr 4/2
end_request: I/O error, dev 16:40, sector 4 end_buffer_io_async: I/O error ide-scsi: unsup command: dev 16:40: REQ_CMD REQ_STARTED sector 6, nr/cnr 2/2
end_request: I/O error, dev 16:40, sector 6 end_buffer_io_async: I/O error ide-scsi: unsup command: dev 16:40: REQ_CMD REQ_STARTED sector 0, nr/cnr 8/2
end_request: I/O error, dev 16:40, sector 0 end_buffer_io_async: I/O error ide-scsi: unsup command: dev 16:40: REQ_CMD REQ_STARTED sector 2, nr/cnr 6/2
end_request: I/O error, dev 16:40, sector 2 end_buffer_io_async: I/O error ide-scsi: unsup command: dev 16:40: REQ_CMD REQ_STARTED sector 4, nr/cnr 4/2
end_request: I/O error, dev 16:40, sector 4 end_buffer_io_async: I/O error ide-scsi: unsup command: dev 16:40: REQ_CMD REQ_STARTED sector 6, nr/cnr 2/2
end_request: I/O error, dev 16:40, sector 6 end_buffer_io_async: I/O error unable to read partition table SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: IOMEGA Model: ZIP 250 Rev: 41.S Type: Direct-Access ANSI SCSI revision: 00 Vendor: LG Model: CD-ROM CRD-8400B Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 489532 512-byte hdwr sectors (251 MB) sda: Write Protect is off sda:<1>Unable to handle kernel NULL pointer dereference at virtual address 000000a0 printing eip: c01b90e7 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c01b90e7>] Not tainted EFLAGS: 00010292 eax: 00000000 ebx: d7dc19c0 ecx: d7dc19c0 edx: 00000001 esi: d7d8e000 edi: 00000000 ebp: d7dc19c0 esp: c13fbb94 ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 1, threadinfo=c13fa000 task=c13f8040) Stack: 000003e8 00000000 00000000 00000000 00000000 c02f68a0 c01c2437 d7dc19c0 d7d8e000 00000000 d7dc19c0 c01c768b 00000000 d7dc19c0 d7d8e000 c01c288b c02f6990 d7dc19c0 00000000 d7d8f000 c02f6ba4 c02f68a0 d7dc19c0 c01c7763 Call Trace: [<c01c2437>] [<c01c768b>] [<c01c288b>] [<c01c7763>] [<c01c7dbf>] [<c01d1f15>] [<c01c2437>] [<c01c288b>] [<c01c294b>] [<c01c2f94>] [<c01d2a62>] [<c01ca7f7>] [<c01cad70>] [<c01d0720>] [<c01b9749>] [<c011c981>] [<c013d4b9>] [<c012a019>] [<c012a0ea>] [<c012b95a>] [<c0159d96>] [<c013f140>] [<c01b60b8>] [<c015a5a7>] [<c015a77c>] [<c01b8b6e>] [<c013f505>] [<c0159b82>] [<c01d3e0f>] [<c0159d23>] [<c0150800>] [<c01d440b>] [<c01cc03e>] [<c0105000>] [<c0105070>] [<c0105000>] [<c0105626>] [<c0105050>]
Code: 8b 90 a0 00 00 00 c7 44 24 18 00 00 00 00 83 e2 02 89 54 24 <0>Kernel panic: Attempted to kill init! <6>SysRq : Resetting
Which I saved as /tmp/ooooo and: ksymoops -o /lib/modules/2.5.12/ -m /usr/src/linux-2.5/System.map -v /usr/src/linux-2.5/vmlinux -K /tmp/ooooo 01.05 14:28 ksymoops 2.3.5 on i686 2.4.19-pre7. Options used -v /usr/src/linux-2.5/vmlinux (specified) -K (specified) -l /proc/modules (default) -o /lib/modules/2.5.12/ (specified) -m /usr/src/linux-2.5/System.map (specified)
No modules in ksyms, skipping objects No ksyms, skipping lsmod cpu: 0, clocks: 996977, slice: 498488 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html sda:<1>Unable to handle kernel NULL pointer dereference at virtual address 000000a0 c01b90e7 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c01b90e7>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010292 eax: 00000000 ebx: d7dc19c0 ecx: d7dc19c0 edx: 00000001 esi: d7d8e000 edi: 00000000 ebp: d7dc19c0 esp: c13fbb94 ds: 0018 es: 0018 ss: 0018 Stack: 000003e8 00000000 00000000 00000000 00000000 c02f68a0 c01c2437 d7dc19c0 d7d8e000 00000000 d7dc19c0 c01c768b 00000000 d7dc19c0 d7d8e000 c01c288b c02f6990 d7dc19c0 00000000 d7d8f000 c02f6ba4 c02f68a0 d7dc19c0 c01c7763 Call Trace: [<c01c2437>] [<c01c768b>] [<c01c288b>] [<c01c7763>] [<c01c7dbf>] [<c01d1f15>] [<c01c2437>] [<c01c288b>] [<c01c294b>] [<c01c2f94>] [<c01d2a62>] [<c01ca7f7>] [<c01cad70>] [<c01d0720>] [<c01b9749>] [<c011c981>] [<c013d4b9>] [<c012a019>] [<c012a0ea>] [<c012b95a>] [<c0159d96>] [<c013f140>] [<c01b60b8>] [<c015a5a7>] [<c015a77c>] [<c01b8b6e>] [<c013f505>] [<c0159b82>] [<c01d3e0f>] [<c0159d23>] [<c0150800>] [<c01d440b>] [<c01cc03e>] [<c0105000>] [<c0105070>] [<c0105000>] [<c0105626>] [<c0105050>] Code: 8b 90 a0 00 00 00 c7 44 24 18 00 00 00 00 83 e2 02 89 54 24
>>EIP; c01b90e7 <blk_rq_map_sg+17/160> <===== Trace; c01c2437 <start_request+1f7/280> Trace; c01c768b <build_sglist+fb/1a0> Trace; c01c288b <queue_commands+13b/190> Trace; c01c7763 <ide_build_dmatable+33/190> Trace; c01c7dbf <ide_dmaproc+ff/2a0> Trace; c01d1f15 <idescsi_issue_pc+75/180> Trace; c01c2437 <start_request+1f7/280> Trace; c01c288b <queue_commands+13b/190> Trace; c01c294b <ide_do_request+6b/90> Trace; c01c2f94 <ide_do_drive_cmd+e4/130> Trace; c01d2a62 <idescsi_queue+582/5d0> Trace; c01ca7f7 <scsi_dispatch_cmd+107/1e0> Trace; c01cad70 <scsi_done+0/b0> Trace; c01d0720 <scsi_request_fn+3d0/3f0> Trace; c01b9749 <generic_unplug_device+29/60> Trace; c011c981 <__run_task_queue+61/70> Trace; c013d4b9 <block_sync_page+19/20> Trace; c012a019 <__lock_page+a9/100> Trace; c012a0ea <lock_page+3a/40> Trace; c012b95a <read_cache_page+aa/100> Trace; c0159d96 <read_dev_sector+36/b0> Trace; c013f140 <blkdev_readpage+0/20> Trace; c01b60b8 <serial_console_write+168/1e0> Trace; c015a5a7 <handle_ide_mess+27/1a0> Trace; c015a77c <msdos_partition+5c/2e0> Trace; c01b8b6e <blk_get_ra_pages+2e/40> Trace; c013f505 <bdget+105/180> Trace; c0159b82 <check_partition+102/180> Trace; c01d3e0f <sd_init_onedisk+77f/790> Trace; c0159d23 <grok_partitions+e3/120> Trace; c0150800 <.text.lock.namespace+19e/1be> Trace; c01d440b <sd_finish+10b/130> Trace; c01cc03e <scsi_register_device+10e/130> Trace; c0105000 <_stext+0/0> Trace; c0105070 <init+20/180> Trace; c0105000 <_stext+0/0> Trace; c0105626 <kernel_thread+26/30> Trace; c0105050 <init+0/180> Code; c01b90e7 <blk_rq_map_sg+17/160> 00000000 <_EIP>: Code; c01b90e7 <blk_rq_map_sg+17/160> <===== 0: 8b 90 a0 00 00 00 mov 0xa0(%eax),%edx <===== Code; c01b90ed <blk_rq_map_sg+1d/160> 6: c7 44 24 18 00 00 00 movl $0x0,0x18(%esp,1) Code; c01b90f4 <blk_rq_map_sg+24/160> d: 00 Code; c01b90f5 <blk_rq_map_sg+25/160> e: 83 e2 02 and $0x2,%edx Code; c01b90f8 <blk_rq_map_sg+28/160> 11: 89 54 24 00 mov %edx,0x0(%esp,1)
<0>Kernel panic: Attempted to kill init!
I don't understand anything about it, and if I should send more informations, just let me know, thanks you very much,
Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |