lkml.org 
[lkml]   [2002]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: VIA and 2.5.8-pre kernels doesn't boot!
Anton Altaparmakov wrote:
> For me 2.5.8-pre2 and -pre3 (-pre1 not tested) both fail to boot on my
> VIA chipset box. 2.5.7 works fine.
>
> Best regards,
>
> Anton
>
> 2.5.8-pre3 prints on serial console and then it just dies:
> ----snip----
> Uniform Multi-Platform E-IDE driver ver.:7.0.0
> ide: system bus speed 33MHz
> VIA Technologies, Inc. Bus Master IDE: IDE controller on PCI slot 00:07.1
> VIA Technologies, Inc. Bus Master IDE: chipset revision 6
> VIA Technologies, Inc. Bus Master IDE: not 100% native mode: will probe
> irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
> hda: IC35L040AVER07-0, ATA DISK drive
> ----snip----
>

Does it crash dump thereafter? Could be that the code around
save_match doesn't get it right.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:25    [W:0.149 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site