lkml.org 
[lkml]   [2002]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] io.h cleanup (x86)
This patch unravels the mess of macros that create the inX/outX functions.

--

Brian Gerst
diff -urN linux-2.5.8-pre2/include/asm-i386/io.h linux/include/asm-i386/io.h
--- linux-2.5.8-pre2/include/asm-i386/io.h Sun Apr 7 12:12:45 2002
+++ linux/include/asm-i386/io.h Mon Apr 8 11:19:44 2002
@@ -315,122 +315,73 @@
#endif /* __KERNEL__ */

#ifdef SLOW_IO_BY_JUMPING
-#define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:"
+#define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:"
#else
-#define __SLOW_DOWN_IO "\noutb %%al,$0x80"
+#define __SLOW_DOWN_IO "outb %%al,$0x80;"
#endif

+static inline void slow_down_io(void) {
+ __asm__ __volatile__(
+ __SLOW_DOWN_IO
#ifdef REALLY_SLOW_IO
-#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
-#else
-#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO
+ __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
#endif
+ : : );
+}

#ifdef CONFIG_MULTIQUAD
extern void *xquad_portio; /* Where the IO area was mapped */
-#endif /* CONFIG_MULTIQUAD */
-
-/*
- * Talk about misusing macros..
- */
-#define __OUT1(s,x) \
-static inline void out##s(unsigned x value, unsigned short port) {
+#else
+#define xquad_portio (0)
+#endif

-#define __OUT2(s,s1,s2) \
-__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
+#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)

-#ifdef CONFIG_MULTIQUAD
-#define __OUTQ(s,ss,x) /* Do the equivalent of the portio op on quads */ \
-static inline void out##ss(unsigned x value, unsigned short port) { \
- if (xquad_portio) \
- write##s(value, (unsigned long) xquad_portio + port); \
- else /* We're still in early boot, running on quad 0 */ \
- out##ss##_local(value, port); \
+#define __BUILDIO(bwl,bw,type) \
+static inline void out##bwl##_local(unsigned type value, int port) { \
+ __asm__ __volatile__("out" #bwl " %" #bw "0, %w1" : : "a"(value), "Nd"(port)); \
} \
-static inline void out##ss##_quad(unsigned x value, unsigned short port, int quad) { \
- if (xquad_portio) \
- write##s(value, (unsigned long) xquad_portio + (XQUAD_PORTIO_QUAD*quad)\
- + port); \
-}
-
-#define __INQ(s,ss) /* Do the equivalent of the portio op on quads */ \
-static inline RETURN_TYPE in##ss(unsigned short port) { \
+static inline void out##bwl##_quad(unsigned type value, int port, int quad) { \
if (xquad_portio) \
- return read##s((unsigned long) xquad_portio + port); \
- else /* We're still in early boot, running on quad 0 */ \
- return in##ss##_local(port); \
+ write##bwl(value, XQUAD_PORT_ADDR(port, quad)); \
+ else \
+ out##bwl##_local(value, port); \
} \
-static inline RETURN_TYPE in##ss##_quad(unsigned short port, int quad) { \
+static inline void out##bwl(unsigned type value, int port) { \
+ out##bwl##_quad(value, port, 0); \
+} \
+static inline void out##bwl##_p(unsigned type value, int port) { \
+ out##bwl(value, port); \
+ slow_down_io(); \
+} \
+static inline void outs##bwl(int port, const void *addr, unsigned long count) { \
+ __asm__ __volatile__("rep; outs" #bwl : "+S"(addr), "+c"(count) : "d"(port)); \
+} \
+static inline unsigned type in##bwl##_local(int port) { \
+ unsigned type value; \
+ __asm__ __volatile__("in" #bwl " %w1, %" #bw "0" : "=a"(value) : "Nd"(port)); \
+ return value; \
+} \
+static inline unsigned type in##bwl##_quad(int port, int quad) { \
if (xquad_portio) \
- return read##s((unsigned long) xquad_portio + (XQUAD_PORTIO_QUAD*quad)\
- + port); \
- else\
- return 0;\
+ return read##bwl(XQUAD_PORT_ADDR(port, quad)); \
+ else \
+ return in##bwl##_local(port); \
+} \
+static inline unsigned type in##bwl(int port) { \
+ return in##bwl##_quad(port, 0); \
+} \
+static inline unsigned type in##bwl##_p(int port) { \
+ unsigned type value = in##bwl(port); \
+ slow_down_io(); \
+ return value; \
+} \
+static inline void ins##bwl(int port, void *addr, unsigned long count) { \
+ __asm__ __volatile__("rep; ins" #bwl : "+D"(addr), "+c"(count) : "d"(port)); \
}
-#endif /* CONFIG_MULTIQUAD */

-#ifndef CONFIG_MULTIQUAD
-#define __OUT(s,s1,x) \
-__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
-__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));}
-#else
-/* Make the default portio routines operate on quad 0 */
-#define __OUT(s,s1,x) \
-__OUT1(s##_local,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
-__OUT1(s##_p_local,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} \
-__OUTQ(s,s,x) \
-__OUTQ(s,s##_p,x)
-#endif /* CONFIG_MULTIQUAD */
-
-#define __IN1(s) \
-static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
-
-#define __IN2(s,s1,s2) \
-__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
-
-#ifndef CONFIG_MULTIQUAD
-#define __IN(s,s1,i...) \
-__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
-__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; }
-#else
-/* Make the default portio routines operate on quad 0 */
-#define __IN(s,s1,i...) \
-__IN1(s##_local) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
-__IN1(s##_p_local) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
-__INQ(s,s) \
-__INQ(s,s##_p)
-#endif /* CONFIG_MULTIQUAD */
-
-#define __INS(s) \
-static inline void ins##s(unsigned short port, void * addr, unsigned long count) \
-{ __asm__ __volatile__ ("rep ; ins" #s \
-: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
-
-#define __OUTS(s) \
-static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
-{ __asm__ __volatile__ ("rep ; outs" #s \
-: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
-
-#define RETURN_TYPE unsigned char
-__IN(b,"")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned short
-__IN(w,"")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned int
-__IN(l,"")
-#undef RETURN_TYPE
-
-__OUT(b,"b",char)
-__OUT(w,"w",short)
-__OUT(l,,int)
-
-__INS(b)
-__INS(w)
-__INS(l)
-
-__OUTS(b)
-__OUTS(w)
-__OUTS(l)
+__BUILDIO(b,b,char)
+__BUILDIO(w,w,short)
+__BUILDIO(l,,long)

#endif
\
 
 \ /
  Last update: 2005-03-22 13:25    [W:0.024 / U:24.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site