lkml.org 
[lkml]   [2002]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [linux-usb-devel] Re: 2.5.8-pre3: kernel BUG at usb.c:849! (preempt_count 1)
Date
On Wednesday 10 April 2002 6:40 pm, you wrote:
> > > UP x86 K6 system running 2.5.8-pre3 with preemption.
> > > Using usb-uhci. I got the following bug when powering off:
> > >
> > > usb.c: USB disconnect on device 3
> > > ...
>
> Does the same BUG happen with "uhci"?

I haven't been able to reproduce it yet with usb-uhci... I will try uhci
also.

> And what usb device driver(s) were supposed to have stopped
> using "device 3"? I've only noticed such device refcounting bugs
> being caused by the USB device drivers with bad disconnect()
> routines, not usbcore or any of the host controller drivers, but of
> course that can change.

Ha!

$ cat /proc/bus/usb/drivers
usbfs
hub

There are no other drivers! I have a USB webcam and a modem
attached. I didn't compile the driver for the webcam, and the modem
has a user space driver that works via usbfs.

Duncan.

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=b800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=0840 Rev= 1.00
S: Product=Camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms
E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=06b9 ProdID=4061 Rev= 0.00
S: Manufacturer=ALCATEL
S: Product=Speed Touch USB
S: SerialNumber=0090D02C2C5A
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbfs
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbfs
I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbfs
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbfs
E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbfs
E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:25    [W:0.073 / U:36.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site