[lkml]   [2002]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 8139too on Proliant
Doesn't look like it:

dns1:/home/smiddle# modprobe via-rhine
/lib/modules/2.4.9-686/kernel/drivers/net/via-rhine.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.4.9-686/kernel/drivers/net/via-rhine.o: insmod
/lib/modules/2.4.9-686/kernel/drivers/net/via-rhine.o failed
/lib/modules/2.4.9-686/kernel/drivers/net/via-rhine.o: insmod via-rhine

Just to clarify, the exact model is a DFE530TX+. I use this exact same
card on most my machines at home, with the 8139too driver as well. They
work fine.

Also, from /proc/pci:

Bus 0, device 4, function 0:
Ethernet controller: PCI device 1186:1300 (D-Link System Inc) (rev
IRQ 15.
Master Capable. Latency=66. Min Gnt=32.Max Lat=64.
I/O at 0x3000 [0x30ff].
Non-prefetchable 32 bit memory at 0xb0800000 [0xb08000ff].

On Thu, 2002-03-07 at 10:19, Masoud Sharbiani wrote:
> Hi,
> D-Link 530TX driver is actually via-rhine, not 8139too. Have you tried that
> one?
> Masoud
> --
> Masoud Sharabiani
> Software Developer, OEone Corporation
> #103 - 290 St-Joseph Blvd. Hull, Quebec J8Y 3Y3

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:24    [W:0.028 / U:0.800 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site