lkml.org 
[lkml]   [2002]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] NatSemi SCx200 Support
Date
Thibaut Laurent <thibaut@celestix.com> wrote:
> There's a typo in drivers/i2c/Config.in.
> CONFIG_SCx200_I2C is defined but CONFIG_I2C_SCx200 is tested...
>
> + dep_tristate ' NatSemi SCx200 I2C using GPIO pins' CONFIG_SCx200_I2C $CONFIG_ARCH_SCx200 $CONFIG_I2C_ALGOBIT
> + if [ "$CONFIG_I2C_SCx200" != "n" ]; then
> ^^^^^^^^^^^^^^^^^
> this should be CONFIG_SCx200_I2C

You are absolutely correct. I switched the names around and must have
missed that. A patch is attached.

Thanks,
/Christer

diff -ur linux/drivers/i2c/Config.in.orig linux/drivers/i2c/Config.in
--- linux/drivers/i2c/Config.in.orig Mon Mar 4 01:24:27 2002
+++ linux/drivers/i2c/Config.in Mon Mar 4 01:25:18 2002
@@ -14,7 +14,7 @@
dep_tristate ' ELV adapter' CONFIG_I2C_ELV $CONFIG_I2C_ALGOBIT
dep_tristate ' Velleman K9000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT
dep_tristate ' NatSemi SCx200 I2C using GPIO pins' CONFIG_SCx200_I2C $CONFIG_ARCH_SCx200 $CONFIG_I2C_ALGOBIT
- if [ "$CONFIG_I2C_SCx200" != "n" ]; then
+ if [ "$CONFIG_SCx200_I2C" != "n" ]; then
int ' GPIO pin used for SCL' CONFIG_SCx200_I2C_SCL -1
int ' GPIO pin used for SDA' CONFIG_SCx200_I2C_SDA -1
fi
--
"Just how much can I get away with and still go to heaven?"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:21    [W:0.034 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site