lkml.org 
[lkml]   [2002]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: IDE and hot-swap disk caddies
Date
From
> At the interface level, there is some support.
> Look at hdparm's -b option to tristate the bus.

There is no mention of -b in hdparm's help screen, and in the man page
it's only mentioned in the description of -L.

Is there a newer version of hdparm I need?


> But that's the whole bus. If the controller implements

IDE1? That's okay for me, I can control the hardware configuration to
that extent. If the other device is a CD reader, I'm not going to
corrupt anything. If necessary, I'll make sure it's unmounted.

> master/slave on one cable, you're hosed, electrically.
> It's the whole interface. 95% of controlers are like this.
>
> Intel's PIIX can do master/slave on separate ports, but
> then you loose one bus. Laptops with bays also do things
> like this, but that's special hardware, hard to get programming
> specs for.
>
> I think if you add the drive *after* boot, it doesn't
> have the benefit of the BIOS setting up PIO/UDMA modes,
> so I would try the hdparm -X speed settings also.

At present the system hangs if I add a master when the primary's
present, before I get to do anything.

I've not tried adding a slave to an existing master.

As to the BIOS settings, I only configure drives required for booting.
I've been doing that for years, before I ever used Linux, when I
discovered that OS/2 wasn't paying attention to them. (A good thing in
the case of OS/2 as the instructions for one of my drives gave the
wrong geometry;-().



>
> Jeremy
>
> ----- Original Message -----
> From: "John Summerfield" <summer@os2.ami.com.au>
> Sent: Monday, March 25, 2002 3:16 PM
> Subject: Re: IDE and hot-swap disk caddies
>
> > > > The device is hot-swap capable and has a switch (others have a key)
> > > > that locks the drive in and powers it up; in the other position the
> > > > drive is powered down and can be removed.
> > >
> > > Linux doesn't support IDE hot swap at the drive level. Its basically
> > > waiting people to want it enough to either fund it or go write the code
> > >
> >
> > What needs to be done? How extensive is the surgery needed?
>

--
Cheers
John Summerfield

Microsoft's most solid OS: http://www.geocities.com/rcwoolley/

Note: mail delivered to me is deemed to be intended for me, for my
disposition.

==============================
If you don't like being told you're wrong,
be right!



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:25    [W:0.131 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site