Messages in this thread | | | Date | Wed, 27 Mar 2002 16:30:13 -0800 (PST) | From | Andre Hedrick <> | Subject | Re: [bug] 2.4.19-pre4-ac2 hang at boot with ALI15x3 chipset support |
| |
On Wed, 27 Mar 2002, James Mayer wrote:
> On Thu, Mar 28, 2002 at 12:04:33AM +0000, Alan Cox wrote: > > > After adding printk calls to alim15x3.c, it seems to hang during the > > > pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02) call on line 588. > > > > Does it work if you comemtn that line out ? > > No, if the line is commented out I get: > > hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } > hda: drive not ready for command
Translation the HOST is not setup and the enable hooks are broken. If you write to those bits it will tank the controller, and that is as much as I can come forward on at this point. This is appears to be exclusive to the TransMeta based NorthBridge + ALI south bridge.
Regards,
Andre Hedrick LAD Storage Consulting Group
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |