lkml.org 
[lkml]   [2002]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 3c59x and cardbus
    On Tue, Feb 26, 2002 at 03:32:23PM -0800, Andrew Morton wrote:
    > christophe barbé wrote:
    > >
    > > Now that the forget_option bug is solved I have the following :
    > >
    > > Each time I suspend, the card resume in a bad state but return in a good
    > > state after that :
    > >
    > > NETDEV WATCHDOG: eth0: transmit timed out
    >
    > The transceiver didn't power up, or came up in silly
    > mode. I'll see if I can reproduce any of this.
    > What NIC are you using?

    I have played a little with mii-diag and vortex-diag without success.
    'mii-diag' didn't show differences between good and bad states.
    'vortex-diag' show a difference with the -aa option, I attach the
    output.

    I have tried some modifications in the driver, basically to do what
    tx_timeout does in the resume function without success.
    After that I have realized that the timeout, which occurs most of the
    time 1 minute after the resume, is not the reason why the card returns
    in the correct state (watchdog is set to 1000) otherwise it would occurs
    earlier.

    Andrew, will you send a patch to marcello for the 'always bigger card
    id' bug or do you want me to do it ?

    Christophe

    >
    > -
    > -
    > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    > the body of a message to majordomo@vger.kernel.org
    > More majordomo info at http://vger.kernel.org/majordomo-info.html
    > Please read the FAQ at http://www.tux.org/lkml/

    --
    Christophe Barbé <christophe.barbe@ufies.org>
    GnuPG FingerPrint: E0F6 FADF 2A5C F072 6AF8 F67A 8F45 2F1E D72C B41E

    In a cat's eye, all things belong to cats.
    --English proverb
    vortex-diag.c:v2.05 5/15/2001 Donald Becker (becker@scyld.com)
    http://www.scyld.com/diag/index.html
    Index #1: Found a 3CCFE575CT CardBus adapter at 0x4000.
    Initial window 7, registers values by window:
    Window 0: 0000 0000 0002 0000 0808 06ff ffff 0000.
    Window 1: 0000 0000 0000 0000 0000 0000 0000 2000.
    Window 2: 0100 d302 1ede 0000 0000 0000 4102 4000.
    Window 3: 0000 0060 05ea 0000 0040 1000 0800 6000.
    Window 4: 0000 0000 0000 0ce0 0003 8800 0000 8000.
    Window 5: 1ffc 0000 0000 0600 0807 06ce 06c6 a000.
    Window 6: 0000 0000 0000 0000 0000 0000 0000 c000.
    Window 7: 0000 0000 0000 0000 0000 0000 0000 e000.
    Vortex chip registers at 0x4000
    0x4010: 00000000 00000000 00000016 00000000
    0x4020: 00000020 00000000 00080000 00000004
    0x4030: 00000000 75718a8f 00c2e030 00080004
    Indication enable is 06c6, interrupt enable is 06ce.
    No interrupt sources are pending.
    Transceiver/media interfaces available: MII.
    Transceiver type in use: MII.
    MAC settings: half-duplex.
    Station address set to 00:01:02:d3:de:1e.
    Configuration options 4102.
    vortex-diag.c:v2.05 5/15/2001 Donald Becker (becker@scyld.com)
    http://www.scyld.com/diag/index.html
    Index #1: Found a 3CCFE575CT CardBus adapter at 0x4000.
    Initial window 7, registers values by window:
    Window 0: 0000 0000 0000 0000 5555 06ff ffff 0000.
    Window 1: 0000 0000 0000 0000 0000 0000 0000 2000.
    Window 2: 0100 d302 1ede 0000 0000 0000 4102 4000.
    Window 3: 0000 0060 05ea 0000 0040 1000 0800 6000.
    Window 4: 0000 0000 0000 0ce0 0003 8800 0000 8000.
    Window 5: 1ffc 0000 0000 0600 0807 06ce 06c6 a000.
    Window 6: 0000 0000 0000 0000 0000 0000 0000 c000.
    Window 7: 0000 0000 0000 0000 0000 0000 0000 e000.
    Vortex chip registers at 0x4000
    0x4010: 00000000 00000000 00000000 00000000
    0x4020: 00000020 00000000 00080000 00000004
    0x4030: 00000000 2c01d3ff 00c2e000 00080004
    Indication enable is 06c6, interrupt enable is 06ce.
    No interrupt sources are pending.
    Transceiver/media interfaces available: MII.
    Transceiver type in use: MII.
    MAC settings: half-duplex.
    Station address set to 00:01:02:d3:de:1e.
    Configuration options 4102.
    Basic registers of MII PHY #0: 3100 782d 0300 e54b 01e1 0000 0000 0000.
    Basic mode control register 0x3100: Auto-negotiation enabled.
    You have link beat, and everything is working OK.
    Your link partner does not do autonegotiation, and this transceiver type
    does not report the sensed link speed.
    End of basic transceiver information.

    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2005-03-22 13:24    [W:0.031 / U:1.964 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site