Messages in this thread | | | Date | Tue, 19 Mar 2002 18:09:29 +0100 | From | Martin Dalecki <> | Subject | Re: oops at boot with 2.5.7 and i810 |
| |
Luigi Genoni wrote: > HI, > > also with 2.5.7, as with 2.5.6, I have problems at boot. > I get the usual oops while initialising IDE. > > my ide controller is: > > 00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) (prog-if 80 > [Master]) > Subsystem: Intel Corporation 82801AA IDE > Flags: bus master, medium devsel, latency 0 > I/O ports at 2460 [size=16] > > unfortunatelly, I do not have even the time to write down oops message, > but eip is c0135068, but then I do not find a similar entry in system.map > > any hint
This device is behaving quite like the 440MX chipset I have myself I can't therefore the oops expect beeing caused by a trivial programming error in the actual ide driver. I don't see much pointer acces in piix.c code as well.
However you could eventually just try apply the following pseudo diff to piix.c and then try again:
- { PCI_DEVICE_ID_INTEL_82801AA_1, PIIX_UDMA_66 | PIIX_PINGPONG }, + { PCI_DEVICE_ID_INTEL_82801AA_1, PIIX_UDMA_66 },
Replaceing PIIX_UDMA_33 with PIIX_UDMA_33 could be worth a try as well.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |