lkml.org 
[lkml]   [2002]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 3c59x and cardbus
On Tue, Feb 26, 2002 at 07:32:59PM -0500, nick@snowman.net wrote:
> I've gotten this exact same error on various 3c905x cards. What it
> usually means for me is IRQ problems of some type.
> Nick
>

This is a timeout for a tx packet.
Each time you have a problem with a network card, you will see a tx
timeout. This is a result not a cause.
So I guess that you have NOT the same problem expecially if it's IRD
related.

Christophe

> On Wed, 27 Feb 2002, Pozsar Balazs wrote:
>
> >
> > I get very similar error if I remove the module and then reload it (rmmod
> > followed by a modprobe). So once I rmmod it, It will never be usable again
> > until i reboot.
> >
> > I have to pci 3com 905's, I can send the pci id's if those matters
> > tomorrow.
> >
> >
> > On Tue, 26 Feb 2002, christophe [iso-8859-15] barbé wrote:
> >
> > > Now that the forget_option bug is solved I have the following :
> > >
> > > Each time I suspend, the card resume in a bad state but return in a good
> > > state after that :
> > >
> > > NETDEV WATCHDOG: eth0: transmit timed out
> > > eth0: transmit timed out, tx_status 00 status e000.
> > > diagnostics: net 0ee0 media 8800 dma 000000a0.
> > > Flags; bus-master 1, dirty 20(4) current 36(4)
> > > Transmit list 00af8300 vs. c0af8300.
> > > 0: @c0af8200 length 80000062 status 00000062
> > > 1: @c0af8240 length 80000062 status 00000062
> > > 2: @c0af8280 length 80000062 status 80000062
> > > 3: @c0af82c0 length 80000062 status 80000062
> > > 4: @c0af8300 length 80000062 status 00000062
> > > 5: @c0af8340 length 8000003c status 0000003c
> > > 6: @c0af8380 length 80000062 status 00000062
> > > 7: @c0af83c0 length 80000062 status 00000062
> > > 8: @c0af8400 length 8000003c status 0000003c
> > > 9: @c0af8440 length 80000062 status 00000062
> > > 10: @c0af8480 length 80000062 status 00000062
> > > 11: @c0af84c0 length 80000036 status 00000036
> > > 12: @c0af8500 length 80000062 status 00000062
> > > 13: @c0af8540 length 80000062 status 00000062
> > > 14: @c0af8580 length 80000062 status 00000062
> > > 15: @c0af85c0 length 80000062 status 00000062
> > > eth0: Resetting the Tx ring pointer.
> > >
> > > The tx ring seems to be in a good state, no ?
> > >
> > > Christophe
> > >
> > > On Tue, Feb 26, 2002 at 01:59:07PM -0500, christophe barbé wrote:
> > > > Thank you, I have done something similar and that solve it in my case at
> > > > least. This driver was clearly not designed for cardbus.
> > > >
> > > > I am still looking for my resume/suspend problem.
> > > > Hope to find the solution soon.
> > > >
> > > > Christophe
> > > >
> > > > On Tue, Feb 26, 2002 at 10:51:08AM -0800, Andrew Morton wrote:
> > > > > christophe barbé wrote:
> > > > > >
> > > > > > Ok I have found why.
> > > > > > When I resinsert the card, the driver give it a new id (this driver
> > > > > > supports multiple cards) and the option as I set it is only defined for
> > > > > > the card #0. I would expect that the driver give the same id back.
> > > > > >
> > > > >
> > > > > hrm. OK, hotplugging and slot-positional module parameters weren't
> > > > > designed to live together.
> > > > >
> > > > > This should fix it for single cards. For multiple cards, you'll
> > > > > have to make sure you eject them in reverse scan order :)
> > > > >
> > > > > Index: drivers/net/3c59x.c
> > > > > ===================================================================
> > > > > RCS file: /opt/cvs/lk/drivers/net/3c59x.c,v
> > > > > retrieving revision 1.74.2.7
> > > > > diff -u -r1.74.2.7 3c59x.c
> > > > > --- drivers/net/3c59x.c 2002/02/13 21:03:03 1.74.2.7
> > > > > +++ drivers/net/3c59x.c 2002/02/26 18:49:24
> > > > > @@ -2898,6 +2898,9 @@
> > > > > BUG();
> > > > > }
> > > > >
> > > > > + if (vp->card_idx == vortex_cards_found)
> > > > > + vortex_cards_found--;
> > > > > +
> > > > > vp = dev->priv;
> > > > >
> > > > > /* AKPM: FIXME: we should have
> > > > >
> > > > >
> > > > > -
> > > >
> > > > --
> > > > Christophe Barbé <christophe.barbe@ufies.org>
> > > > GnuPG FingerPrint: E0F6 FADF 2A5C F072 6AF8 F67A 8F45 2F1E D72C B41E
> > > >
> > > > Imagination is more important than knowledge.
> > > > Albert Einstein, On Science
> > >
> > >
> > >
> > > --
> > > Christophe Barbé <christophe.barbe@ufies.org>
> > > GnuPG FingerPrint: E0F6 FADF 2A5C F072 6AF8 F67A 8F45 2F1E D72C B41E
> > >
> > > Imagination is more important than knowledge.
> > > Albert Einstein, On Science
> > >
> >
> > --
> > pozsy
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

--
Christophe Barbé <christophe.barbe@ufies.org>
GnuPG FingerPrint: E0F6 FADF 2A5C F072 6AF8 F67A 8F45 2F1E D72C B41E

L'experience, c'est une connerie par jour mais jamais la même.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 13:24    [W:0.037 / U:12.976 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site