Messages in this thread | | | Date | Wed, 27 Feb 2002 01:29:35 +0100 (MET) | From | Pozsar Balazs <> | Subject | Re: 3c59x and cardbus |
| |
I get very similar error if I remove the module and then reload it (rmmod followed by a modprobe). So once I rmmod it, It will never be usable again until i reboot.
I have to pci 3com 905's, I can send the pci id's if those matters tomorrow.
On Tue, 26 Feb 2002, christophe [iso-8859-15] barbé wrote:
> Now that the forget_option bug is solved I have the following : > > Each time I suspend, the card resume in a bad state but return in a good > state after that : > > NETDEV WATCHDOG: eth0: transmit timed out > eth0: transmit timed out, tx_status 00 status e000. > diagnostics: net 0ee0 media 8800 dma 000000a0. > Flags; bus-master 1, dirty 20(4) current 36(4) > Transmit list 00af8300 vs. c0af8300. > 0: @c0af8200 length 80000062 status 00000062 > 1: @c0af8240 length 80000062 status 00000062 > 2: @c0af8280 length 80000062 status 80000062 > 3: @c0af82c0 length 80000062 status 80000062 > 4: @c0af8300 length 80000062 status 00000062 > 5: @c0af8340 length 8000003c status 0000003c > 6: @c0af8380 length 80000062 status 00000062 > 7: @c0af83c0 length 80000062 status 00000062 > 8: @c0af8400 length 8000003c status 0000003c > 9: @c0af8440 length 80000062 status 00000062 > 10: @c0af8480 length 80000062 status 00000062 > 11: @c0af84c0 length 80000036 status 00000036 > 12: @c0af8500 length 80000062 status 00000062 > 13: @c0af8540 length 80000062 status 00000062 > 14: @c0af8580 length 80000062 status 00000062 > 15: @c0af85c0 length 80000062 status 00000062 > eth0: Resetting the Tx ring pointer. > > The tx ring seems to be in a good state, no ? > > Christophe > > On Tue, Feb 26, 2002 at 01:59:07PM -0500, christophe barbé wrote: > > Thank you, I have done something similar and that solve it in my case at > > least. This driver was clearly not designed for cardbus. > > > > I am still looking for my resume/suspend problem. > > Hope to find the solution soon. > > > > Christophe > > > > On Tue, Feb 26, 2002 at 10:51:08AM -0800, Andrew Morton wrote: > > > christophe barbé wrote: > > > > > > > > Ok I have found why. > > > > When I resinsert the card, the driver give it a new id (this driver > > > > supports multiple cards) and the option as I set it is only defined for > > > > the card #0. I would expect that the driver give the same id back. > > > > > > > > > > hrm. OK, hotplugging and slot-positional module parameters weren't > > > designed to live together. > > > > > > This should fix it for single cards. For multiple cards, you'll > > > have to make sure you eject them in reverse scan order :) > > > > > > Index: drivers/net/3c59x.c > > > =================================================================== > > > RCS file: /opt/cvs/lk/drivers/net/3c59x.c,v > > > retrieving revision 1.74.2.7 > > > diff -u -r1.74.2.7 3c59x.c > > > --- drivers/net/3c59x.c 2002/02/13 21:03:03 1.74.2.7 > > > +++ drivers/net/3c59x.c 2002/02/26 18:49:24 > > > @@ -2898,6 +2898,9 @@ > > > BUG(); > > > } > > > > > > + if (vp->card_idx == vortex_cards_found) > > > + vortex_cards_found--; > > > + > > > vp = dev->priv; > > > > > > /* AKPM: FIXME: we should have > > > > > > > > > - > > > > -- > > Christophe Barbé <christophe.barbe@ufies.org> > > GnuPG FingerPrint: E0F6 FADF 2A5C F072 6AF8 F67A 8F45 2F1E D72C B41E > > > > Imagination is more important than knowledge. > > Albert Einstein, On Science > > > > -- > Christophe Barbé <christophe.barbe@ufies.org> > GnuPG FingerPrint: E0F6 FADF 2A5C F072 6AF8 F67A 8F45 2F1E D72C B41E > > Imagination is more important than knowledge. > Albert Einstein, On Science >
-- pozsy
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |