[lkml]   [2002]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: HPT366: DMA errors?
On Thu, 21 Feb 2002, Mike Fedyk wrote:

> Is that because one of the connector holes is blocked on the cable conector?
> If so, I have had success with just breaking the correct pin so that the 80
> pin cable can be plugged into old motherboard IDE connectors. As always
> with hardware mods, YMMV.

But if I use the old motherboard IDE connector I'll not be using
DMA66, so no need to use those new cables if I have a chunk of the other
cables... (even if I agree that hardware mods are possible, I avoid them
while I can)

Cesar Suga <>

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:24    [W:0.038 / U:4.644 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site