lkml.org 
[lkml]   [2002]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: ide cd-recording not working in 2.4.18-rc2-ac1
    Date
    From
    Alan Cox wrote:
    > > I get this on every cd I try and I've tried more than I'd have liked to.
    > >
    > > Performing OPC...
    > > /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
    > > CDB: 2A 00 00 00 00 1F 00 00 1F 00
    > > status: 0x2 (CHECK CONDITION)
    > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
    > > Sense Key: 0x5 Illegal Request, Segment 0
    > > Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
    >
    > Thats saying that cdrecord sent the drive a bogus command.

    A friend of mine had exactly the same problems. These were eventually
    solved by buying a new CDR drive.

    We tried running the "cdrecord" from the old installation: Same problem.

    We tried it on the remainder of the spindle that used to work with the old
    installation: Same problem.

    We tried it with the CDR discs that I use here: Same problem.

    (I was suspecting a problem with the disks as "start of lead in:
    97:23:00" sounded a bit odd to me, and would result in "logical block
    address out of range", So I first suspected the discs to be
    incompatible with the current cdrecord.)


    > > Now I know every cd isn't bad because they used to work in older
    > > 2.4.17ish kernels. I have scsi-generic support compiled as a module as
    >
    > Does it still work with them ?

    His old installation won't boot anymore, so in that case we can't
    easily try anymore... Grmbl.

    > > SCSI subsystem driver Revision: 1.00
    > > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    >
    > Right same as I am using

    Ehmm. My story is about a real SCSI CDR drive. He now has an IDE drive.

    > > not sure what else I can get informationwize about what the drive is
    > > doing.
    >
    > What type of IDE controller ?

    NCR810.

    Roger.

    --
    ** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 **
    *-- BitWizard writes Linux device drivers for any device you may have! --*
    * There are old pilots, and there are bold pilots.
    * There are also old, bald pilots.
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:24    [W:0.053 / U:0.212 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site