lkml.org 
[lkml]   [2002]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: HPT366: DMA errors?
    On Thu, Feb 21, 2002 at 11:55:34PM -0300, Cesar Suga wrote:
    > I cannot use the 80pin cable with the normal IDE for it does not
    > fit. But I tried with two 80-pin cables.
    >

    Is that because one of the connector holes is blocked on the cable conector?

    If so, I have had success with just breaking the correct pin so that the 80
    pin cable can be plugged into old motherboard IDE connectors. As always
    with hardware mods, YMMV.

    Mike
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:24    [W:0.021 / U:0.756 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site