lkml.org 
[lkml]   [2002]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: ide cd-recording not working in 2.4.18-rc2-ac1
From
Date
On Wed, 2002-02-20 at 20:54, Alan Cox wrote:
> > I get this on every cd I try and I've tried more than I'd have liked to.
> >
> > Performing OPC...
> >
> /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> > CDB: 2A 00 00 00 00 1F 00 00 1F 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
>
> Thats saying that cdrecord sent the drive a bogus command.
>
> > Now I know every cd isn't bad because they used to work in older
> > 2.4.17ish kernels. I have scsi-generic support compiled as a module as
>
> Does it still work with them ?
>
> > SCSI subsystem driver Revision: 1.00
> > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
>
> Right same as I am using
>
> > not sure what else I can get informationwize about what the drive is
> > doing.
>
> What type of IDE controller ?

VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1


If i retry over and over sometimes it will eventually work. (same cd)



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:24    [W:0.048 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site