Keith Baker wrote:
>I  have had a few random hangs with my machine since I added a maxtor 27
> gig IDE drive to it.  I kept trying different combinations of bus
> positions etc.  I figured it was flacky hardware or something.  I added
> the drive in the early 2.4 series.  Recently I became slightly suspicious
> of my Adaptec 2940U2W after reading all of the problems it had in the
> early 2.4.  So I upgraded the bios and got kernel 2.4.17.  Though the
> problem seems diminished it is certainly not gone...
> 
> Now for the kicker...  I found a 99% guarenteed way to hard lock my
> box.  I tried ripping two cds at a time.  One on the ide bus and one on
> the scsi.  Just a note the data is being stored to the maxtor 27 gig
> mentioned above.  The reason I point to the IDE + SCSI combo is that I can
> do two scsi cdroms ripping to the maxtor and it works much more
> reliably.  I am under the impression that IDE CDROMs use the ide bus quite
> heavily under ripping...

Keith,
Does turning off (or reducing the speed of) DMA to the
IDE cdrom with either one of these commands help?
    hdparm -d0 -c1 /dev/hdd 
    hdparm -d 1 -X 34 /dev/hdd
[This assumes the IDE cdrom is connected to /dev/hdd.]

Doug Gilbert
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/