lkml.org 
[lkml]   [2002]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Quick question on Software RAID support.
> I'd like to try that, too, so if you can send me the program ...

I run it on /dev/md0 (which consists of one hd on each HPT370 channel).
You can also do it for /dev/hd{e,g} in parallel - the effects are pretty
much the same. To make it trigger easier, try "ping -f -s 64000" on
background and stress scsi system if you have one. I think any pci load
affects it, but I found 3c905b network load by far the easiest way to
trigger the bug (I even got OOPSes if 3c905b was in certain slot while
doing that.)

Oh, and please excuse the state of the code - it was meant as a quick hack
only...

--
Ville Herva vherva@viasys.com +358-50-5164500
Viasys Oy Hannuntie 6 FIN-02360 Espoo +358-9-2313-2160
PGP key available: http://www.iki.fi/v/pgp.html fax +358-9-2313-2250
#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
//#include <fcntl.h>
#include <asm/fcntl.h>

#define KB (1024)
#define MB (1024 * KB)
#define GB (1024 * MB)

int main(int argc, char** argv)
{
char* dev = "/tmp/jöötti";
unsigned long long blocksz = 64*MB;
unsigned long long maxs = 0;
unsigned iter = 0;
const unsigned long long qgiga = 1024 * 1024 * 1024 / 4;

char *buffer1, *buffer2;
int i;
int devfd;
int err = 0;
char ch;
int round = 0;

if (argc > 1) dev = argv[1];
if (argc > 2) maxs = (long long)atoi(argv[2]) * (long long)MB;
if (argc > 3) blocksz = (long long)atoi(argv[3]) * (long long)MB;
if (argc > 4) iter = atoi(argv[4]);

fprintf(stderr, "This test WILL RUIN THE CONTENTS OF %s!\n", dev);
fprintf(stderr, "Are you 120%% sure you want to do this [Y/N] ? ");
scanf("%c", &ch);
fprintf(stderr, "\n");
if (ch != 'Y')
{
fprintf(stderr, "exiting.\n");
exit(13);
}

fprintf(stderr, "testing %s, max size %llu, block size=%u...\n",
dev, maxs, blocksz);

buffer1 = malloc(blocksz);
buffer2 = malloc(blocksz);
if (!buffer1 || !buffer2)
{
perror("malloc failed");
exit(1);
}
for (i = 0; i < blocksz; i++)
buffer1[i] = (i + rand()) % 256;

for (round = 0; round < iter || iter == 0; round++)
{
unsigned long long nwritten = 0, nread = 0;
int nr = 0;
time_t t = time(NULL);

devfd = open(dev, O_LARGEFILE | O_WRONLY | O_TRUNC | O_CREAT);
if (devfd < 0)
{
perror("open device failed");
exit(1);
}

lseek64(devfd, 0, SEEK_SET);

while ((nr = write(devfd, buffer1, blocksz)) > 0)
{
nwritten += nr;
if (nwritten % qgiga == 0) fprintf(stderr, ".");
if (nwritten % (qgiga * 20) == 0) fprintf(stderr, "%lluG", nwritten / (qgiga * 4));
if (maxs && nwritten > maxs) break;
}
fprintf(stderr, "\n");

fprintf(stderr, "round %i: Wrote %llu bytes, %2.1f MB/s.\n",
round, nwritten,
(float)nwritten / 1024.0 / 1024.0 / (float)(time(NULL) - t));

close (devfd);

devfd = open(dev, O_LARGEFILE | O_RDONLY);
if (devfd < 0)
{
perror("open device failed");
exit(1);
}
lseek64(devfd, 0, SEEK_SET);
t = time(NULL);

while ((nr = read(devfd, buffer2, blocksz)) > 0)
{
if (nr < 0)
{
perror("read");
exit(-2);
}
if (memcmp(buffer1, buffer2, nr))
{
int l, erbytes = 0, erbytes2 = 0, erbytes3 = 0, l2;
err++;
for (l = 0; l < nr; l++)
if (buffer1[l] != buffer2[l])
erbytes++;
for (l = 0; l < nr; l++)
if (buffer1[l] != buffer2[l])
erbytes2++;
for (l = 0; l < nr; l++)
if (buffer1[l] != buffer2[l])
erbytes3++;
fprintf(stderr, "\n%llu byte block at %llu DIFFERS in %i/%i/%i bytes (read %i)!\nFirst 50 bytes:\n",
blocksz, nread, erbytes, erbytes2, erbytes3, nr);

for (l = l2 = 0; l < nr && l2 < 50; l++)
if (buffer1[l] != buffer2[l])
{
fprintf(stderr, "at %8i: %02x vs %02x\n",
l, (unsigned char)buffer1[l], (unsigned char)buffer2[l]);
l2++;
}
}

nread += nr;

if (nread % qgiga == 0) fprintf(stderr, ".");
if (nread % (qgiga * 20) == 0) fprintf(stderr, "%lluG", nread / (qgiga * 4));
if (maxs && nread > maxs) break;
}
fprintf(stderr, "\n");

fprintf(stderr, "round %i: Read %llu bytes, %2.1f MB/s.\n",
round, nread,
(float)nread / 1024.0 / 1024.0 / (float)(time(NULL) - t));

close(devfd);
}

close(devfd);
free(buffer1);
free(buffer2);

return err;
}
\
 
 \ /
  Last update: 2005-03-22 13:24    [W:0.065 / U:2.224 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site