Messages in this thread | | | Date | Thu, 5 Dec 2002 07:57:08 -0800 (PST) | From | dean gaudet <> | Subject | HTB unsable? (was Re: 2.4.20-ac1 unstable on dual athlon) |
| |
On Wed, 4 Dec 2002, dean gaudet wrote:
> i've got a dual athlon 1.4GHz / 760MP (tyan 2462) which has been solid on > 2.4.19-pre7-ac4, but which reboot twice in 2 days with 2.4.20-ac1. > > i then added "noapic" and the 2.4.20-ac1 kernel lasted all of 5 minutes > before rebooting. > > no messages appeared on serial console. > > the kernel configs differed only in that i enabled HTB on the 2.4.20-ac1 > kernel. i've now patched the 2.4.19-pre7-ac4 kernel with HTB and i'll run > with this for a while. below is the config i used for 2.4.20-ac1.
the system rebooted after 8 hours with the 2.4.19-pre7-ac4 + HTB kernel as well... so perhaps the relevent change is the use of HTB.
or perhaps my hardware has gone bad.
these reboots without anything logged are frustrating.
-dean - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |