lkml.org 
[lkml]   [2002]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectvia82cxxx probable incorrect detection (urgency=low)........
I am Argentino <- i don't speak english, please be patient

Kernel-2.4.20-final

lspci -vvv

00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8
a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-



cat /proc/pci
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 33).
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 16).
Master Capable. Latency=32.
I/O at 0xd000 [0xd00f].

dmesg

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <- is my error?
VP_IDE: VIA vt82c686a (rev 21) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLlct20 30, ATA DISK drive
hdc: ST36421A, ATA DISK drive
hdd: ATAPI 44X CDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c030a5c4, I/O limit 4095Mb (mask 0xffffffff)
hda: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=3649/255/63, (U)DMA <- ??????????
blk: queue c030a928, I/O limit 4095Mb (mask 0xffffffff)
hdc: 12596850 sectors (6450 MB) w/256KiB Cache, CHS=13330/15/63, UDMA(66) <- this is ok
hdd: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) <- ok!

i have a chip via82c686a (Epox 7-kxa)
at boot time is been detected via82c686a
proc says via82c586b
lspci -vvv no says
the udma capabilities is not work propetly i set manually with "hdparm -m 8 -W 1 -X udma5 /dev/hda"
whats happening here?

--
/root/.gnupg/pubring.gpg
------------------------
pub 1024D/BE8E00BE 2002-12-06 Aryix Berius (nothing.........) <aryix@softhome.net>
Key fingerprint = 249D C5BC 8B9A C46A C7F4 397D 2A6D 9FF6 BE8E 00BE
sub 2048g/C1C6CB29 2002-12-06

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:31    [W:0.046 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site