lkml.org 
[lkml]   [2002]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: PROBLEM: dvd-drive no longer works (2.4.20)
    Date
    Help! I've still got the problem with my DVD drive that I posted a while ago, 
    and I've recieved no reply for several days. Does anybody have even the
    slightest clue what might be going on? I'm stumped, and any input would be
    appreciated.

    Regardless of any DMA setting, booting still complains with:
    ...
    00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
    hda: ST340016A, ATA DISK drive
    hdb: ST310232A, ATA DISK drive
    hdc: HITACHI DVD-ROM GD-2500, ATAPI CD/DVD-ROM drive
    hdd: CREATIVE CD-RW RW8433E, ATAPI CD/DVD-ROM drive
    hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
    hdd: set_drive_speed_status: error=0x04
    ide1: Drive 1 didn't accept speed setting. Oh, well.
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    ...

    and

    ...
    SCSI subsystem driver Revision: 1.00
    scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    hdc: status error: status=0x7f { DriveReady DeviceFault SeekComplete
    DataRequest CorrectedError Index Error }
    hdc: status error: error=0x7f
    hdc: DMA disabled
    hdc: drive not ready for command
    hdc: ATAPI reset complete
    hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
    hdc: drive not ready for command
    hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
    hdc: drive not ready for command
    hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
    hdc: drive not ready for command
    ide-scsi: (IO,CoD) != (0,1) while issuing a packet command
    hdc: ATAPI reset complete
    hdc: status error: status=0x08 { DataRequest }
    hdc: drive not ready for command
    hdc: ATAPI reset complete
    hdc: status error: status=0x08 { DataRequest }
    scsi0 channel 0 : resetting for second half of retries.
    SCSI bus is being reset for host 0 channel 0.
    hdc: drive not ready for command
    hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
    hdc: drive not ready for command
    ide-scsi: (IO,CoD) != (0,1) while issuing a packet command
    hdc: ATAPI reset complete
    ...

    Thank you,
    Brendon


    On Fri, 6 Dec 2002 11:54 am, you wrote:
    > On Fri, 6 Dec 2002 2:29 am, you wrote:
    > > Could you activate the kernel config option "Enable DMA only for disks"
    > > and see if it still happens?
    >
    > Alas it made no difference. I don't think this is actually about DMA. It
    > happens with or without DMA turned on.
    >
    > Oh, and I forget to mention that I'm not subscribed to the list, so thanx
    > for CCing me in your reply.
    >
    > Peace,
    > Brendon

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:31    [W:0.047 / U:32.212 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site